Dr Qiyang Tan
Research Fellow
School of Mechanical and Mining Engineering
Affiliate of Centre for Advanced Materials Processing and Manufacturing (AMPAM)
Centre for Advanced Materials Processing and Manufacturing
Researcher biography
Dr Qiyang Tan obtained his Bachelor of Materials Science and Engineering in 2014 from South China University of Technology, China. In 2018, he was awarded his PhD degree by The University of Queensland.
Dr Qiyang Tan's research expertise are in the additive manufacturing of metals and MAX phases, high-temperature oxidation of metals, alloy development, thin film characterization, mechanical properties of metals, grain refinement and crystallography. Dr Tan has proposed the Oxide Reinforcement Model, a novel oxidation resistance model to understand the protection capability of the surface oxide layers on metals. Recently, Dr Tan involved in the research of additive manufacturing of metallic and ceramic materials. He has successfully applied the E2EM crystallographic model to identify new grain refiners for various additively manufactured materials including Al, Ti, Cu alloys, steels and γ-TiAl intermetallic alloy. Dr Tan's research hopes are to further apply his fundamental research on grain refinement to develop new refiners for ceramic and metallic-ceramic materials and to improve their processability in additive manufacturing. His research outcomes will also offer materials scientists and engineers a totally new way to fabricated advanced materials using additive manufacturing, therefore to significantly promote the wider application of this cutting-edge manufacturing technology.
Journal Articles
Yin, Yu, Wang, Hao, Tan, Qiyang, Sun, Qiang, Wu, Yueqin, Xu, Shengduo, Zhao, Yitian, Li, Meng, Liao, Xiaozhou, Huang, Han and Zhang, Mingxing (2025). A new route to bulk nanostructured multiphase alloys with ultrahigh hardness. Journal of Materials Science and Technology, 210, 151-158. doi: 10.1016/j.jmst.2024.05.051
Hu, Mingwei, Tan, Qiyang, Knibbe, Ruth, Jiang, Bin, Li, Xue and Zhang, Ming-Xing (2024). Investigation of age-hardening behaviour of Al alloys via feature screening-assisted machine learning. Materials Science and Engineering: A, 916 147381, 147381. doi: 10.1016/j.msea.2024.147381
Yao, Ju, Tan, Qiyang, Venezuela, Jeffrey, Atrens, Andrej and Zhang, Ming-Xing (2024). Additive manufacturing of high-strength low-alloy AISI 4340 steel with an optimal strength-ductility-toughness trade-off. Additive Manufacturing, 94 104496, 104496. doi: 10.1016/j.addma.2024.104496
Fan, Zhiqi, Tan, Qiyang, Kang, Chengwei and Huang, Han (2024). Advances and challenges in direct additive manufacturing of dense ceramic oxides. International Journal of Extreme Manufacturing, 6 (5) 052004, 1-36. doi: 10.1088/2631-7990/ad5424
Hu, Mingwei, Tan, Qiyang, Knibbe, Ruth, Xu, Miao, Liang, Guofang, Zhou, Jianxin, Xu, Jun, Jiang, Bin, Li, Xue, Ramajayam, Mahendra, Dorin, Thomas and Zhang, Ming-Xing (2024). Designing unique and high-performance Al alloys via machine learning: mitigating data bias through active learning. Computational Materials Science, 244 113204, 113204. doi: 10.1016/j.commatsci.2024.113204
Liang, Guo-fang, Liu, Yin-gang, Yang, Xian-liang, Tan, Qi-yang, Wu, Tao, Wang, Jian-jun, Atrens, Andrej, Tian, Zhi-qiang and Zhang, Ming-xing (2024). Refinement of cast microstructure of A517 steel by addition of TiB2. Journal of Iron and Steel Research International. doi: 10.1007/s42243-024-01248-9
Tan, Qiyang and Zhang, Mingxing (2024). Recent advances in inoculation treatment for powder-based additive manufacturing of aluminium alloys. Materials Science and Engineering R: Reports, 158 100773. doi: 10.1016/j.mser.2024.100773
Liu, Yingang, Zhang, Jingqi, Niu, Ranming, Bayat, Mohamad, Zhou, Ying, Yin, Yu, Tan, Qiyang, Liu, Shiyang, Hattel, Jesper Henri, Li, Miaoquan, Huang, Xiaoxu, Cairney, Julie, Chen, Yi-Sheng, Easton, Mark, Hutchinson, Christopher and Zhang, Ming-Xing (2024). Manufacturing of high strength and high conductivity copper with laser powder bed fusion. Nature Communications, 15 (1) 1283, 1-9. doi: 10.1038/s41467-024-45732-y
Li, Gan, Zhao, Chunlu, Huang, Yuhe, Tan, Qiyang, Hou, Junhua, He, Xi, Guo, Chuan, Lu, Wenjun, Zhou, Lin, Liu, Sida, Zhang, Lei, Chen, Xuliang, Li, Xinggang, Li, Ying, Luan, Junhua, Li, Zhenmin, Mao, Xinping, Zhang, Ming-Xing, Zhu, Qiang and Lu, Jian (2024). Additively manufactured fine-grained ultrahigh-strength bulk aluminum alloys with nanostructured strengthening defects. Materials Today, 76, 40-51. doi: 10.1016/j.mattod.2024.05.006
Hu, Mingwei, Tan, Qiyang, Knibbe, Ruth, Xu, Miao, Jiang, Bin, Wang, Sen, Li, Xue and Zhang, Ming-Xing (2023). Recent applications of machine learning in alloy design: a review. Materials Science and Engineering: R: Reports, 155 100746, 100746. doi: 10.1016/j.mser.2023.100746
Yao, Ju, Tan, Qiyang, Venezuela, Jeffrey, Atrens, Andrej and Zhang, Ming-Xing (2023). Recent research progress in hydrogen embrittlement of additively manufactured metals – a review. Current Opinion in Solid State and Materials Science, 27 (5) 101106, 101106. doi: 10.1016/j.cossms.2023.101106
Tan, Qiyang, Chang, Haiwei, Lindwall, Greta, Li, Erlei, Durga, A., Liang, Guofang, Yin, Yu, Wang, Geoff and Zhang, Ming-Xing (2023). Unravelling the roles of TiN-nanoparticle inoculant in additively manufactured 316 stainless steel. Journal of Materials Science & Technology, 175, 153-169. doi: 10.1016/j.jmst.2023.08.018
Tan, Qiyang, Yin, Yu and Zhang, Ming-Xing (2023). Comparison of the grain-refining efficiencies of Ti and LaB6 inoculants in additively manufactured 2024 aluminum alloy: the important role of solutes. Metals, 13 (8) 1490. doi: 10.3390/met13081490
Yin, Yu, Tan, Qiyang, Yang, Nan, Chen, Xingrui, Ren, Wangrui, Liu, Lei, Chen, Houwen, Atrens, Andrej, Ma, Ninshu, Huang, Han and Zhang, Ming-Xing (2023). Cost-effective and facile route to ultrafine-microstructure high-entropy alloy for cryogenic applications. Materials Science and Engineering: A, 881 145408, 145408. doi: 10.1016/j.msea.2023.145408
Yin, Yu, Ren, Wangrui, Tan, Qiyang, Chen, Houwen, Huang, Han and Zhang, Ming-Xing (2023). A cost-effective cryogenic high-entropy alloy with high strength-ductility synergy and strain hardenability. Materials Science and Engineering: A, 865 144607, 144607. doi: 10.1016/j.msea.2023.144607
Liang, Guofang, Liu, Yingang, Yang, Xianliang, Atrens, Andrej, Wu, Tao, Tian, Zhiqiang, Tan, Qiyang, Yin, Yu, Wang, Jianjun and Zhang, Ming-Xing (2023). Grain refinement of A517 steel by inoculation with Al–5Ti–B master alloy. Materials Chemistry and Physics, 296 127320, 1-11. doi: 10.1016/j.matchemphys.2023.127320
Li, Feng, Li, Zhicheng, Tang, Chenglu, Zhang, Lijun, Tan, Qiyang, Chen, Chao, Zhang, MingXing and Zhou, Kechao (2023). Design high-strength Al–Mg–Si alloy fabricated by laser powder bed fusion: cracking suppression and strengthening mechanism. Materials Science and Engineering: A, 864 144591, 1-12. doi: 10.1016/j.msea.2023.144591
Tan, Qiyang, Zhuang, Wyman, Attia, Marco, Djugum, Richard and Zhang, Mingxing (2022). Recent progress in additive manufacturing of bulk MAX phase components: a review. Journal of Materials Science and Technology, 131, 30-47. doi: 10.1016/j.jmst.2022.05.026
Chen, Siqi, Tan, Qiyang, Gao, Wenqiang, Wu, Guilin, Fan, Jinming, Feng, Zongqiang, Huang, Tianlin, Godfrey, Andrew W., Zhang, Mingxing and Huang, Xiaoxu (2022). Effect of heat treatment on the anisotropy in mechanical properties of selective laser melted AlSi10Mg. Materials Science and Engineering A, 858 144130, 1-12. doi: 10.1016/j.msea.2022.144130
Huang, Danni, Zhou, Yinghao, Yao, Xiyu, Tan, Qiyang, Chang, Haiwei, Wang, Dawei, Lu, Songhe, Liu, Shiyang, Xu, Jingyuan, Jin, Shenbao, Sha, Gang, Huang, Han, Yan, Ming and Zhang, Ming-Xing (2022). From crack-prone to crack-free: unravelling the roles of LaB6 in a β-solidifying TiAl alloy fabricated with laser additive manufacturing. Materials Science and Engineering: A, 861 144358, 1-14. doi: 10.1016/j.msea.2022.144358
Tan, Qiyang, Chang, Haiwei, Yin, Yu, Wang, Feng, Huang, Danni, Liang, Guofang, Wu, Tao, Yan, Ming, Cheng, Xing and Zhang, Ming-Xing (2022). Simultaneous enhancements of strength and ductility of a selective laser melted H13 steel through inoculation treatment. Scripta Materialia, 219 114874, 114874. doi: 10.1016/j.scriptamat.2022.114874
Zhang, Jingqi, Liu, Yingang, Sha, Gang, Jin, Shenbao, Hou, Ziyong, Bayat, Mohamad, Yang, Nan, Tan, Qiyang, Yin, Yu, Liu, Shiyang, Hattel, Jesper Henri, Dargusch, Matthew, Huang, Xiaoxu and Zhang, Ming-Xing (2022). Designing against phase and property heterogeneities in additively manufactured titanium alloys. Nature Communications, 13 (1) 4660, 4660. doi: 10.1038/s41467-022-32446-2
Tan, Qiyang, Yin, Yu, Wang, Feng, Chang, Haiwei, Liu, Shiyang, Liang, Guofang, Wu, Tao and Zhang, Ming-Xing (2022). Rationalization of brittleness and anisotropic mechanical properties of H13 steel fabricated by selective laser melting. Scripta Materialia, 214 114645, 114645. doi: 10.1016/j.scriptamat.2022.114645
Fan, Zhiqi, Yin, Yu, Tan, Qiyang, Li, Xuliang, Niu, Pengda, Li, Ruidi, Yuan, Tiechui, Zhang, Ming-Xing and Huang, Han (2022). Unveiling solidification mode transition and crystallographic characteristics in laser 3D-printed Al2O3-ZrO2 eutectic ceramics. Scripta Materialia, 210 114433, 114433. doi: 10.1016/j.scriptamat.2021.114433
Li, Gan, Li, Xinwei, Guo, Chuan, Zhou, Yang, Tan, Qiyang, Qu, Wenying, Li, Xinggang, Hu, Xiaogang, Zhang, Ming-Xing and Zhu, Qiang (2022). Investigation into the effect of energy density on densification, surface roughness and loss of alloying elements of 7075 aluminium alloy processed by laser powder bed fusion. Optics and Laser Technology, 147 107621, 107621. doi: 10.1016/j.optlastec.2021.107621
Yin, Yu, Zhao, Yitian, Koey, Kai En, Tan, Qiyang, Zhang, Ming-Xing and Huang, Han (2022). In-situ synthesized age-hardenable high-entropy composites with superior wear resistance. Composites Part B: Engineering, 235 109795, 109795. doi: 10.1016/j.compositesb.2022.109795
Yin, Yu, Tan, Qiyang, Sun, Qiang, Ren, Wangrui, Zhang, Jingqi, Liu, Shiyang, Liu, Yingang, Bermingham, Michael, Chen, Houwen and Zhang, Ming-Xing (2022). Heterogeneous lamella design to tune the mechanical behaviour of a new cost- effective compositionally complicated alloy. Journal of Materials Science and Technology, 96, 113-125. doi: 10.1016/j.jmst.2021.03.083
Yin, Yu, Tan, Qiyang, Bermingham, Michael, Mo, Ning, Zhang, Jingqi and Zhang, Ming-Xing (2022). Laser additive manufacturing of steels. International Materials Reviews, 67 (5), 1-87. doi: 10.1080/09506608.2021.1983351
Liu, Shiyang, Zhan, Hongyi, Kent, Damon, Tan, Qiyang, Yin, Yu, Doan, Nghiem, Wang, Chang, Dargusch, Matthew and Wang, Gui (2022). Effect of Mg on dynamic recrystallization of Zn–Mg alloys during room-temperature compression. Materials Science and Engineering: A, 830 142243, 142243. doi: 10.1016/j.msea.2021.142243
Tan, Qiyang, Yin, Yu, Prasad, Arvind, Li, Gan, Zhu, Qiang, StJohn, David Henry and Zhang, Ming-Xing (2022). Demonstrating the roles of solute and nucleant in grain refinement of additively manufactured aluminium alloys. Additive Manufacturing, 49 102516, 102516. doi: 10.1016/j.addma.2021.102516
Huang, Danni, Tan, Qiyang, Zhou, Yinghao, Yin, Yu, Wang, Feng, Wu, Tao, Yang, Xianliang, Fan, Zhiqi, Liu, Yingang, Zhang, Jingqi, Huang, Han, Yan, Ming and Zhang, Ming-Xing (2021). The significant impact of grain refiner on γ-TiAl intermetallic fabricated by laser-based additive manufacturing. Additive Manufacturing, 46 102172, 102172. doi: 10.1016/j.addma.2021.102172
Liu, Yingang, Zhang, Jingqi, Tan, Qiyang, Yin, Yu, Liu, Shiyang, Li, Meng, Li, Miaoquan, Liu, Qiong, Zhou, Ying, Wu, Tao, Wang, Feng and Zhang, Ming-Xing (2021). Additive manufacturing of high strength copper alloy with heterogeneous grain structure through laser powder bed fusion. Acta Materialia, 220 117311, 117311. doi: 10.1016/j.actamat.2021.117311
Hu, Mingwei, Tan, Qiyang, Knibbe, Ruth, Wang, Sen, Li, Xue, Wu, Tianqi, Jarin, Sams and Zhang, Ming-Xing (2021). Prediction of mechanical properties of wrought aluminium alloys using feature engineering assisted machine learning approach. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 52 (7), 2873-2884. doi: 10.1007/s11661-021-06279-5
Zhao, Yitian, Fan, Zhiqi, Tan, Qiyang, Yin, Yu, Lu, Mingyuan and Huang, Han (2021). Interfacial and tribological properties of laser deposited TiOxNy/Ti composite coating on Ti alloy. Tribology International, 155 106758, 1-9. doi: 10.1016/j.triboint.2020.106758
Yin, Yu, Tan, Qiyang, Zhao, Yitian, Sun, Qiang, Shi, Zhiming, Bermingham, Michael, Zhuang, Wyman, Huang, Han and Zhang, Ming-Xing (2021). A cost-effective Fe-rich compositionally complicated alloy with superior high-temperature oxidation resistance. Corrosion Science, 180 109190, 109190. doi: 10.1016/j.corsci.2020.109190
Liu, Yingang, Zhang, Jingqi, Tan, Qiyang, Yin, Yu, Li, Miaoquan and Zhang, Ming-Xing (2021). Mechanical performance of simple cubic architected titanium alloys fabricated via selective laser melting. Optics and Laser Technology, 134 106649, 1-8. doi: 10.1016/j.optlastec.2020.106649
Zhang, Jingqi, Liu, Yingang, Bayat, Mohamad, Tan, Qiyang, Yin, Yu, Fan, Zhiqi, Liu, Shiyang, Hattel, Jesper Henri, Dargusch, Matthew and Zhang, Ming-Xing (2021). Achieving high ductility in a selectively laser melted commercial pure-titanium via in-situ grain refinement. Scripta Materialia, 191, 155-160. doi: 10.1016/j.scriptamat.2020.09.023
Tan, Qiyang, Yin, Yu, Fan, Zhiqi, Zhang, Jingqi, Liu, Yingang and Zhang, Ming-Xing (2021). Uncovering the roles of LaB6-nanoparticle inoculant in the AlSi10Mg alloy fabricated via selective laser melting. Materials Science and Engineering: A, 800 140365. doi: 10.1016/j.msea.2020.140365
Tan, Qiyang, Fan, Zhiqi, Tang, Xiaoqin, Yin, Yu, Li, Gan, Huang, Danni, Zhang, Jingqi, Liu, Yingang, Wang, Feng, Wu, Tao, Yang, Xianliang, Huang, Han, Zhu, Qiang and Zhang, Ming-Xing (2021). A novel strategy to additively manufacture 7075 aluminium alloy with selective laser melting. SSRN Electronic Journal, 821 141638, 141638. doi: 10.2139/ssrn.3774509
Tan, Qiyang, Liu, Yingang, Fan, Zhiqi, Zhang, Jingqi, Yin, Yu and Zhang, Ming-Xing (2020). Effect of processing parameters on the densification of an additively manufactured 2024 Al alloy. Journal of Materials Science and Technology, 58, 34-45. doi: 10.1016/j.jmst.2020.03.070
Liu, Yingang, Zhang, Jingqi, Gu, Xiaojun, Zhou, Ying, Yin, Yu, Tan, Qiyang, Li, Miaoquan and Zhang, Ming-Xing (2020). Mechanical performance of a node reinforced body-centred cubic lattice structure manufactured via selective laser melting. Scripta Materialia, 189, 95-100. doi: 10.1016/j.scriptamat.2020.08.015
Liang, Guofang, Tan, Qiyang, Liu, Yingang, Wu, Tao, Yang, Xianliang, Tian, Zhiqiang, Atrens, Andrej and Zhang, Ming-Xing (2020). Effect of cooling rate on microstructure and mechanical properties of a low-carbon low-alloy steel. Journal of Materials Science, 56 (5), 3995-4005. doi: 10.1007/s10853-020-05483-9
Tan, Qiyang, Zhang, Jingqi, Sun, Qiang, Fan, Zhiqi, Li, Gan, Yin, Yu, Liu, Yingang and Zhang, Ming-Xing (2020). Inoculation treatment of an additively manufactured 2024 aluminium alloy with titanium nanoparticles. Acta Materialia, 196, 1-16. doi: 10.1016/j.actamat.2020.06.026
Yin, Yu, Kent, Damon, Tan, Qiyang, Bermingham, Michael and Zhang, Ming-Xing (2020). Spheroidization behaviour of a Fe-enriched eutectic high-entropy alloy. Journal of Materials Science and Technology, 51, 173-179. doi: 10.1016/j.jmst.2020.01.066
Yin, Yu, Tan, Qiyang, Wang, Tong, Kent, Damon, Mo, Ning, Bermingham, Michael, Li, Huijun and Zhang, Ming-Xing (2020). Eutectic modification of Fe-enriched high-entropy alloys through minor addition of boron. Journal of Materials Science, 55 (29), 14571-14587. doi: 10.1007/s10853-020-05025-3
Yin, Yu, Chen, Zhihan, Mo, Ning, Kent, Damon, Candella, Adhitya Riadhi, Koey, Kai En, Tan, Qiyang, Bermingham, Michael and Zhang, Ming-Xing (2020). High-temperature age-hardening of a novel cost-effective Fe45Ni25Cr25Mo5 high entropy alloy. Materials Science and Engineering A, 788 139580, 139580. doi: 10.1016/j.msea.2020.139580
Mo, Ning, McCarroll, Ingrid, Tan, Qiyang, Ceguerra, Anna, Cairney, Julie, Dieringa, Hajo, Huang, Yuanding, Jiang, Bin, Pan, Fusheng, Bermingham, Michael and Zhang, Ming-Xing (2020). Roles of Nd and Mn in a new creep-resistant magnesium alloy. Materials Science and Engineering A, 779 139152, 139152. doi: 10.1016/j.msea.2020.139152
Fan, Zhiqi, Zhao, Yitian, Tan, Qiyang, Yu, Bowen, Zhang, Ming-Xing and Huang, Han (2020). New insights into the growth mechanism of 3D-printed Al2O3–Y3Al5O12 binary eutectic composites. Scripta Materialia, 178, 274-280. doi: 10.1016/j.scriptamat.2019.11.040
Zhao, Yitian, Lu, Mingyuan, Fan, Zhiqi, McCormick, Paul, Tan, Qiyang, Mo, Ning and Huang, Han (2020). Microstructures and mechanical properties of wear-resistant titanium oxide coatings deposited on Ti-6Al-4V alloy using laser cladding. Journal of the European Ceramic Society, 40 (3), 798-810. doi: 10.1016/j.jeurceramsoc.2019.10.037
Tan, Qiyang, Zhang, Jingqi, Mo, Ning, Fan, Zhiqi, Yin, Yu, Bermingham, Michael, Liu, Yingang, Huang, Han and Zhang, Ming-Xing (2020). A novel method to 3D-print fine-grained AlSi10Mg alloy with isotropic properties via inoculation with LaB6 nanoparticles. Additive Manufacturing, 32 101034. doi: 10.1016/j.addma.2019.101034
Mo, Ning, McCarroll, Ingrid, Tan, Qiyang, Ceguerra, Anna, Liu, Ying, Cairney, Julie, Dieringa, Hajo, Huang, Yuanding, Jiang, Bin, Pan, Fusheng, Bermingham, Michael and Zhang, Ming-Xing (2019). Understanding solid solution strengthening at elevated temperatures in a creep-resistant Mg-Gd-Ca alloy. Acta Materialia, 181, 185-199. doi: 10.1016/j.actamat.2019.09.058
Luo, Xian, Tan, Qi-yang, Mo, Ning, Yin, Yu, Yang, Yan-qing, Zhuang, Wyman and Zhang, Ming-xing (2019). Effect of deep surface rolling on microstructure and properties of AZ91 magnesium alloy. Transactions of Nonferrous Metals Society of China, 29 (7), 1424-1429. doi: 10.1016/s1003-6326(19)65049-1
Fan, Zhiqi, Zhao, Yitian, Tan, Qiyang, Mo, Ning, Zhang, Ming-Xing, Lu, Mingyuan and Huang, Han (2019). Nanostructured Al2O3-YAG-ZrO2 ternary eutectic components prepared by laser engineered net shaping. Acta Materialia, 170, 24-37. doi: 10.1016/j.actamat.2019.03.020
Tan, Qiyang, Yin, Yu, Mo, Ning, Zhang, Mingxing and Atrens, Andrej (2019). Recent understanding of the oxidation and burning of magnesium alloys. Surface Innovations, 7 (2), 1-22. doi: 10.1680/jsuin.18.00062
Tan, Qiyang, Mo, Ning, Lin, Chih-Ling, Zhao, Yitian, Yin, Yu, Jiang, Bin, Pan, Fusheng, Atrens, Andrej, Huang, Han and Zhang, Ming-Xing (2018). Generalisation of the oxide reinforcement model for the high oxidation resistance of some Mg alloys micro-alloyed with Be. Corrosion Science, 147, 357-371. doi: 10.1016/j.corsci.2018.12.001
Yin, Yu, Zhang, Jingqi, Tan, Qiyang, Zhuang, Wyman, Mo, Ning, Bermingham, Michael and Zhang, Ming-Xing (2018). Novel cost-effective Fe-based high entropy alloys with balanced strength and ductility. Materials & Design, 162, 24-33. doi: 10.1016/j.matdes.2018.11.033
Mo, Ning, Tan, Qiyang, Bermingham, Michael, Huang, Yuanding, Dieringa, Hajo, Hort, Norbert and Zhang, Ming-Xing (2018). Current development of creep-resistant magnesium cast alloys: a review. Materials and Design, 155, 422-442. doi: 10.1016/j.matdes.2018.06.032
Zhang, Gen, Wu, Liang, Tang, Aitao, Pan, Huiling, Ma, Yanlong, Zhan, Qin, Tan, Qiyang, Pan, Fusheng and Atrens, Andrej (2018). Effect of micro-arc oxidation coatings formed at different voltages on the in situ growth of layered double hydroxides and their corrosion protection. Journal of the Electrochemical Society, 165 (7), C317-C327. doi: 10.1149/2.0531807jes
Tan, Qiyang, Mo, Ning, Lin, Chih-Ling, Jiang, Bin, Pan, Fusheng, Huang, Han, Atrens, Andrej and Zhang, Ming-Xing (2018). Improved oxidation resistance of Mg-9Al-1Zn alloy microalloyed with 60 wt ppm Be attributed to the formation of a more protective (Mg,Be)O surface oxide. Corrosion Science, 132, 272-283. doi: 10.1016/j.corsci.2018.01.006
Mo, Ning, Tan, Qiyang, Jiang, Bin, Pan, Fusheng and Zhang, Ming-Xing (2017). Stress-Relaxation Behavior of Magnesium-3Gadolinium-2Calcium-Based Alloys at Elevated Temperatures. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 48 (11), 5710-5716. doi: 10.1007/s11661-017-4324-2
Tan, Qiyang, Mo, Ning, Jiang, Bin, Pan, Fusheng, Atrens, Andrej and Zhang, Ming-Xing (2017). Combined influence of Be and Ca on improving the high-temperature oxidation resistance of the magnesium alloy Mg-9Al-1Zn. Corrosion Science, 122, 1-11. doi: 10.1016/j.corsci.2017.03.023
Tan, Qiyang, Atrens, Andrej, Mo, Ning and Zhang, Ming-Xing (2016). Oxidation of magnesium alloys at elevated temperatures in air: a review. Corrosion Science, 112, 734-759. doi: 10.1016/j.corsci.2016.06.018
Tan, Qiyang, Mo, Ning, Jiang, Bin, Pan, Fusheng, Atrens, Andrej and Zhang, Ming-Xing (2016). Oxidation resistance of Mg-9Al-1Zn alloys micro-alloyed with Be. Scripta Materialia, 115, 38-41. doi: 10.1016/j.scriptamat.2015.12.022
Thesis
Tan, Qiyang (2018). Influence of trace addition of Be on the oxidation behaviour of Mg alloys. PhD Thesis, School of Mechanical and Mining Engineering, The University of Queensland. doi: 10.14264/uql.2018.827