Publications
Book Chapter
Daniel, W. J. T. and McHenry, C. (2001). Bite force to skull stress correlation - modelling the skull of Alligator mississippiensis. Crocodilian Biology and Evolution. (pp. 135-143) edited by G.C. Grigg, F. Seebacher and C.E. Franklin. NSW, Australia: Surrey Beatty & Sons.
Journal Articles
Mannan, A., Daniel, W. J. T. and Meehan, P. A. (2023). The investigation of the contact and wear of railway axle bearings under various race conformities. Wear, 532-533 205117, 1-17. doi: 10.1016/j.wear.2023.205117
Wang, Chang, Qian, Zhen, Meehan, Paul A., Daniel, William J.T. and Ding, Shichao (2023). Analytical and numerical determination of the forming load in the Chain-die forming process. Journal of Manufacturing Processes, 102, 478-489. doi: 10.1016/j.jmapro.2023.07.035
Vodenitcharova, Tania, Daniel, William J.T., Liu, Sheng and Meehan, Paul A. (2023). A rapid kinematic method for the prediction of sheet performance in two-point incremental sheet forming. Journal of Materials Processing Technology, 312 117850, 1-14. doi: 10.1016/j.jmatprotec.2022.117850
Qian, Zhen, Zhao, Yitian, Wang, Chang, Liu, Sheng, Xiong, Ziliu, Meehan, Paul A., Daniel, William J.T. and Ding, Shichao (2021). Numerical and experimental investigation of the bending zone in free U-bending. Journal of Manufacturing Science and Engineering, 143 (9) 091006, 1-32. doi: 10.1115/1.4050180
Wang, Chenhao, Daniel, William J. T., Lu, Haibo, Liu, Sheng and Meehan, Paul A. (2021). A comparative investigation of damage models for fracture prediction in two-point incremental forming. International Journal of Advanced Manufacturing Technology, 112 (11-12), 3069-3081. doi: 10.1007/s00170-020-06587-x
Qian, Zhen, Sun, Yong, Li, Yaguang, Wang, Chang, Meehan, Paul A., Daniel, William J.T. and Ding, Shichao (2020). Investigation of the design process for the Chain-die forming technology based on the developed multi-stand numerical model. Journal of Materials Processing Technology, 277 116484, 116484. doi: 10.1016/j.jmatprotec.2019.116484
Qian, Zhen, Wang, Chang, An, Kang, Meehan, Paul A., Daniel, William J.T. and Ding, Shichao (2019). Investigation of the forming load in the chain-die forming process. Journal of Manufacturing Processes, 45, 70-82. doi: 10.1016/j.jmapro.2019.06.031
Sun, Yong, Luzin, Vladimir, Khan, Sabrina, Vajragupta, Napat, Meehan, Paul, Daniel, Bill, Yanagimoto, Jun, Xiong, Ziliu and Ding, Shichao (2019). Understanding of residual stresses in chain-die-formed dual-phase (DP) metallic components: predictive modelling and experimental validation. International Journal of Advanced Manufacturing Technology, 103 (9-12), 3337-3360. doi: 10.1007/s00170-019-03671-9
Sun, Yong, Li, Yaguang, Li, Dayong, Meehan, Paul A., Daniel, William J. T., Shi, Lei, Xiao, Hua, Zhang, Jichao and Ding, Shichao (2019). Predictive modelling of longitudinal bow in Chain-die formed AHSS profiles and its experimental verification. Journal of Manufacturing Processes, 39, 208-225. doi: 10.1016/j.jmapro.2019.02.007
Qian, Zhen , Sun, Yong , Meehan, Paul A., Daniel, William J.T. and Ding, Shichao (2017). Experimental and numerical investigation of flange angle in Chain-die formed AHSS U-channel sections. International Journal of Advanced Manufacturing Technology, 92 (1-4), 1-12. doi: 10.1007/s00170-017-0159-7
Sun, Yong, Qian, Zhen, Daniel, William J. T., Meehan, Paul A. , Shi, Lei and Ding, Shichao (2017). Analytical and numerical analyses of the longitudinal plastic strain and web-warping in Chain-die-formed AHSS sections with variable widths. International Journal of Advanced Manufacturing Technology, 92 (1-4), 1-18. doi: 10.1007/s00170-017-0228-y
Sun, Yong, Luzin, Vladimir, Daniel, William J. T., Meehan, Paul A., Zhang, Mingxing and Ding, Shichao (2017). Development of the slope cutting method for determining the residual stresses in roll formed products. Measurement, 100, 26-35. doi: 10.1016/j.measurement.2016.12.036
Sun, Yong, Li, Yaguang, Liu, Zhaobing, Daniel, William J. T., Shi, Lei, Meehan, Paul A. and Ding, Shichao (2017). Experimental investigation and prediction of the maximum edge longitudinal membrane strain and springback of Chain-die-formed AHSS U-channels using response surface methodology. International Journal of Advanced Manufacturing Technology, 90 (5-8), 1-14. doi: 10.1007/s00170-016-9522-3
Sun, Yong, Li, Yaguang, Daniel, William J. T., Meehan, Paul A., Liu, Zhaobing and Ding, Shichao (2016). Longitudinal strain development in Chain-die forming AHSS products: analytical modelling, finite element analysis and experimental verification. Journal of Materials Processing Technology, 243, 322-334. doi: 10.1016/j.jmatprotec.2016.12.019
Lu, Haibo, Kearney, Michael, Liu, Sheng, Daniel, William J. T. and Meehan, Paul A. (2016). Two-directional toolpath correction in single-point incremental forming using model predictive control. International Journal of Advanced Manufacturing Technology, 91 (1-4), 1-16. doi: 10.1007/s00170-016-9672-3
Liu, Sheng, Tan, Ye, Daniel, William J. T. and Meehan, Paul A. (2016). Modelling of track wear damage due to changes in friction conditions: a comparison between AC and DC electric drive locomotives. Wear, 336-367, 338-345. doi: 10.1016/j.wear2016.05.023
Li, Yanle, Daniel, William J. T. and Meehan, Paul A. (2016). Deformation analysis in single-point incremental forming through finite element simulation. International Journal of Advanced Manufacturing Technology, 88 (1-4), 1-13. doi: 10.1007/s00170-016-8727-9
Li, Yanle, Daniel, William J. T., Liu, Zhaobing, Lu, Haibo and Meehan, Paul (2015). Deformation mechanics and efficient force prediction in single point incremental forming. Journal of Materials Processing Technology, 221, 100-111. doi: 10.1016/j.jmatprotec.2015.02.009
Tian, Ye, Liu, Sheng, Daniel, William J.T. and Meehan, Paul A. (2015). Investigation of the impact of locomotive creep control on wear under changing contact conditions. Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility, 53 (5), 692-709. doi: 10.1080/00423114.2015.1020815
Li, Yanle, Lu, Haibo, Daniel, William, J.T and Meehan, Paul A (2015). Investigation and optimization of deformation energy and geometric accuracy in the incremental sheet forming process using response surface methodology. International Journal of Advanced Manufacturing Technology, 79 (9-12), 2041-2055. doi: 10.1007/s00170-015-6986-5
Tian, Ye, Daniel, William J.T., Liu, Sheng and Meehan, Paul A. (2015). Comparison of PI and fuzzy logic based sliding mode locomotive creep controls with change of rail-wheel contact conditions. International Journal of Rail Transportation, 3 (1), 40-59. doi: 10.1080/23248378.2014.994259
Liu, Sheng, Tian, Ye, Daniel, William J. T. and Meehan, Paul A. (2015). Dynamic response of a locomotive with AC electric drives to changes in friction conditions. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 231 (1), 90-103. doi: 10.1177/0954409715620535
Li, Yanle, Liu, Zhaobing, Lu, Haibo, Daniel, W. J. T. (Bill), Liu, Sheng and Meehan, Paul A. (2014). Efficient force prediction for incremental sheet forming and experimental validation. International Journal of Advanced Manufacturing Technology, 73 (1-4), 571-587. doi: 10.1007/s00170-014-5665-2
Liu, Zhaobing, Daniel, William J. T., Li, Yanle, Liu, Sheng and Meehan, Paul A. (2014). Multi-pass deformation design for incremental sheet forming: Analytical modeling, finite element analysis and experimental validation. Journal of Materials Processing Technology, 214 (3), 620-634. doi: 10.1016/j.jmatprotec.2013.11.010
Li, Yanle, Liu, Zhaobing, Daniel, W. J. T. (Bill) and Meehan, P. A. (2014). Simulation and experimental observations of effect of different contact interfaces on the incremental sheet forming process. Materials and Manufacturing Processes, 29 (2), 121-128. doi: 10.1080/10426914.2013.822977
Daniel, William J. T., Pal, Sarvesh and Farjoo, Mohammadali (2013). Rail squats: progress in understanding the Australian experience. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 227 (5), 481-492. doi: 10.1177/0954409713500950
Farjoo, Mohammadali, Daniel, William, Bellette, Paul and Meehan, Paul A. (2013). Field statistical and finite element analysis of rail squats. Engineering Fracture Mechanics, 109, 117-129. doi: 10.1016/j.engfracmech.2013.05.004
Luzin, V., Prask, H.-J., Gnaupel-Herold, T., Gordon, J., Wexler, D., Rathod, Ch., Pal, S., Daniel, W. and Atrens, A. (2013). Neutron residual stress measurements in rails. Neutron News, 24 (3), 9-13. doi: 10.1080/10448632.2013.804353
Pal, Sarvesh, Daniel, William J. T. and Farjoo, Mohammadali (2013). Early stages of rail squat formation and the role of a white etching layer. International Journal of Fatigue, 52, 144-156. doi: 10.1016/j.ijfatigue.2013.02.016
Farjoo, Mohammadali, Pal, Sarvesh, Daniel, William J.T. and Meehan, Paul A. (2012). Stress intensity factors around a 3D squat form crack and prediction of crack growth direction considering water entrapment and elastic foundation. Engineering Fracture Mechanics, 94, 37-55. doi: 10.1016/j.engfracmech.2012.07.011
Pal, Sarvesh, Daniel, William J.T., Valente, Carlos H.G., Wilson, Andrew and Atrens, Andrej (2012). Surface damage on new AS60 rail caused by wheel slip. Engineering Failure Analysis, 22, 152-165. doi: 10.1016/j.engfailanal.2012.01.002
Farjoo, Mohammadali, Daniel, William and Meehan, Paul A. (2012). Modelling a squat form crack on a rail laid on an elastic foundation. Engineering Fracture Mechanics, 85, 47-58. doi: 10.1016/j.engfracmech.2012.02.004
Pal, Sarvesh, Valente, Carlos, Daniel, William and Farjoo, Mohammadali (2012). Metallurgical and physical understanding of rail squat initiation and propagation. Wear, 284-285, 30-42. doi: 10.1016/j.wear.2012.02.013
Galakhar, Alexander S., Gates, Jeffrey D., Daniel, William J. T. and Meehan, Paul A. (2011). Adhesive tool wear in the cold roll forming process. Wear, 271 (11-12), 2728-2745. doi: 10.1016/j.wear.2011.05.047
Bellette, P. A., Meehan, P. A. and Daniel, W. J. T. (2011). Validation of a tangent track corrugation model with a two disk test rig. Wear, 271 (1-2), 268-277. doi: 10.1016/j.wear.2010.10.020
Batten, R. D, Bellette, P. A., Meehan, P. A., Horwood, R. J. and Daniel, W. J.T. (2011). Field and theoretical investigation of the mechanism of corrugation wavelength fixation under speed variation. Wear, 271 (1-2), 278-286. doi: 10.1016/j.wear.2010.10.027
Vuong, T. T., Meehan, P. A., Eadie, D. T., Oldknow, K., Elvidge, D., Bellette, P. A. and Daniel, W. J. (2011). Investigation of a transitional wear model for wear and wear-type rail corrugation prediction. Wear, 271 (1-2), 287-298. doi: 10.1016/j.wear.2010.10.008
Ding, Shichao, Meehan, Paul A. and Daniel, William J. T. (2011). A novel sheet metal forming method-Millipede forming. Journal of Materials Processing Technology, 211 (3), 376-381. doi: 10.1016/j.jmatprotec.2010.10.012
Bellette, P. A., Meehan, P. A. and Daniel, W. J. T. (2010). Contact induced wear filtering and its influence on corrugation growth. Wear, 268 (11-12), 1320-1328. doi: 10.1016/j.wear.2010.02.002
Meehan, P. A., Bellette, P. A., Batten, R. D., Daniel, W. J. T. and Horwood, R. J. (2009). A case study of wear-type rail corrugation prediction and control using speed variation. Journal of Sound and Vibration, 325 (1-2), 85-105. doi: 10.1016/j.jsv.2009.02.046
Meehan, P.A. and Daniel, W.J.T. (2008). Effects of wheel passing frequency on wear-type corrugations. Wear, 265 (9-10), 1202-1211. doi: 10.1016/j.wear.2008.03.024
Bellette, P., Meehan, P.A. and Daniel, W.J.T. (2008). Effects of variable pass speed on wear-type corrugation growth. Journal of Sound and Vibration, 314 (3-5), 616-634. doi: 10.1016/j.jsv.2007.12.038
Daniel, W.J.T., Horwood, R.J., Meehan, P. A. and Wheatley, N. (2008). Analysis of rail corrugation in cornering. Wear, 265 (9-10), 1183-1192. doi: 10.1016/j.wear.2008.02.030
Daniel, W. J.T., Chen, C.-Y. and Meehan, P. A. (2008). Modelling the effects of friction modifiers on rail corrugation in cornering. Vehicle System Dynamics: International Journal of vehicle mechanics and mobility, 46 (9), 845-866. doi: 10.1080/00423110701656767
Nazari, A., Guan, Z., Daniel, W. J. T. and Gurgenci, H. (2007). Parametric study of hot spot stresses around tubular joints with doubler plates. Practice Periodical on Structural Design and Construction, 12 (1), 38-47. doi: 10.1061/(ASCE)1084-0680(2007)12:1(38)
Nazari, A., Guan, Z., Daniel, W. J. T. and Gurgenci, H. (2007). Parametric equations using generic representation of joint stiffness. Journal of Offshore Mechanics and Arctic Engineering, 129 (2), 131-137. doi: 10.1115/1.2426998
Mchenry, CR, Clausen, PD, Daniel, WJT, Meers, MB and Pendharkar, A (2006). Biomechanics of the rostrum in crocodilians: A comparative analysis using finite-element modeling. Anatomical Record Part A-discoveries In Molecular Cellular And Evolutionary Biology, 288A (8), 827-849. doi: 10.1002/ar.a.20360
Daniel, WJT and Belytschko, T (2005). Suppression of spurious intermediate frequency modes in under-integrated elements by combined stiffness/viscous stabilization. International Journal For Numerical Methods In Engineering, 64 (3), 335-353. doi: 10.1002/nme.1369
Meehan, P. A., Daniel, W. and Campey, T. (2005). Prediction of the growth of wear-type rail corrugation. Wear, 258 (7-8), 1001-1013. doi: 10.1016/j.wear.2004.03.049
Daniel, W. J. T. (2003). A partial velocity approach to subcycling structural dynamics. Computer Methods In Applied Mechanics And Engineering, 192 (3-4), 375-394. doi: 10.1016/S0045-7825(02)00518-2
Daniel, WJT (2003). Explicit/implicit partitioning and a new explicit form of the generalized alpha method. Communications In Numerical Methods In Engineering, 19 (11), 909-920. doi: 10.1002/cnm.640
Belytschko, T, Daniel, WJT and Ventura, G (2002). A monolithic smoothing-gap algorithm for contact-impact based on the signed distance function. International Journal For Numerical Methods In Engineering, 55 (1), 101-125. doi: 10.1002/nme.568
Daniel, W. J. T. (2001). Three-dimensional orthotropic viscoelastic finite element model of a human ligament. Computer Methods in Biomechanics and Biomedical Engineering, 4 (3), 265-279. doi: 10.1080/10255840108908008
Smith, AL, Mee, DJ, Daniel, WJT and Shimoda, T (2001). Design, modelling and analysis of a six component force balance for hypervelocity wind tunnel testing. Computers & Structures, 79 (11), 1077-1088. doi: 10.1016/S0045-7949(01)00005-0
Brell, E, Veidt, M and Daniel, W (2001). Influence of deceleration profiles on occupant velocity differential and injury potential. International Journal of Crashworthiness, 6 (4), 605-620. doi: 10.1533/cras.2001.0201
Daniel, WJT (1998). Subcycling first- and second-order generalizations of the trapezoidal rule. International Journal For Numerical Methods In Engineering, 42 (6), 1091-1119. doi: 10.1002/(SICI)1097-0207(19980730)42:6<1091::AID-NME401>3.0.CO;2-A
Daniel, WJT (1998). A study of the stability of subcycling algorithms in structural dynamics. Computer Methods In Applied Mechanics And Engineering, 156 (1-4), 1-13. doi: 10.1016/S0045-7825(97)00140-0
Daniel, WJT (1997). The subcycled Newmark algorithm. Computational Mechanics, 20 (3), 272-281. doi: 10.1007/s004660050248
Daniel, WJT (1997). Analysis and implementation of a new constant acceleration subcycling algorithm. International Journal For Numerical Methods In Engineering, 40 (15), 2841-2855. doi: 10.1002/(SICI)1097-0207(19970815)40:15<2841::AID-NME193>3.0.CO;2-S
Mee, David J., Daniel, William J. T. and Simmons, John M. (1996). Three-component force balance for flows of millisecond duration. AIAA Journal, 34 (3), 590-595. doi: 10.2514/3.13108
Daniel W.J.T. and Mee D.J. (1995). Finite element modelling of a three-component force balance for hypersonic flows. Computers and Structures, 54 (1), 35-48. doi: 10.1016/0045-7949(94)00309-Q
Daniel W.J.T. (1991). An expert system for validation of displacement and rotation boundary conditions on finite element models. Computers and Structures, 39 (1-2), 105-119. doi: 10.1016/0045-7949(91)90077-Y
Daniel W.J.T. (1989). Performance of overlapping finite elements. Computers and Structures, 31 (1), 47-53. doi: 10.1016/0045-7949(89)90166-1
Daniel, W. J T (1988). Integration of rule-based and procedural code to obtain flexible engineering software. Advances in Engineering Software (1978), 10 (2), 72-76. doi: 10.1016/0141-1195(88)90002-2
Daniel W.J.T. (1986). A coupled finite element/one-dimensional wave model of stress wave propagation in a shock tube. Computers and Structures, 22 (4), 583-587. doi: 10.1016/0045-7949(86)90009-X
Daniel, W. J. T. (1983). Development of a conveyor pulley stress analysis package. Transactions of the Institution of Engineers, Australia. Mechanical engineering, ME8 (3), 117-123.
Daniel, W. J. T. (1982). Flywheel design by the finite element method. Transactions of the Institution of Engineers, Australia. Mechanical engineering, ME7 (2), 75-79.
Daniel, W. J. T. (1980). Modal methods in finite element fluid-structure eigenvalue problems. International journal for numerical methods in engineering, 15 (8), 1161-1175. doi: 10.1002/nme.1620150805
Daniel, William J.T. (1980). Performance of reduction methods for acoustic and fluid-structure eigenvalue problems. International journal for numerical methods in engineering, 15 (11), 1585-1594. doi: 10.1002/nme.1620151102
Conference Papers
Mannan, Abdul, Daniel, W. J. T. and Meehan, P. A. (2022). On the rolling contact conformity behaviour and wear distribution in a railway axle bearing. 12th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems (CM2022), Melbourne, VIC, Australia, 4 - 7 September 2022. Clayton, VIC, Australia: Monash Institute of Railway Technology .
Mannan, Abdul, Daniel, W. J. T. and Meehan, P. A. (2021). Race conformity effect on the contact and wear characteristics of spherical roller bearings. ACAM10: 10th Australasian Congress on Applied Mechanics, Virtual, 29 November - 1 December 2021. Barton, ACT, Australia: Engineers Australia.
Qian, Zhen, Wang, Chang, Sun, Yong, An, Kang, Meehan, Paul A., Daniel, William J.T. and Ding, Shichao (2019). Numerical investigation of the influential factors regarding forming load in Chain-die forming process. The 13th International Conference on Numerical Methods in Industrial Forming Processes, Portsmouth, NH, United States, 23-27 June 2019.
Wang, Chang, Qian, Zhen, Xiong, Ziliu, Sun, Yong, An, Kang, Meehan, Paul A. , Daniel, William J.T. and Ding, Shichao (2019). An investigation on manufacturing of AHSSÂ square tube product combining chain-die forming and roll forming processes. The 13th International Conference on Numerical Methods in Industrial Forming Processes, Portsmouth, NH, United States, 23-27 June 2019. Pittsburgh, PA, United States: The Minerals, Metals & Materials Society (TMS) .
Daniel, W. J. T. (2018). Intermediate shapes for incremental sheet forming. NUMISHEET 2018: 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Tokyo, Japan, 30 July - 3 August 2018. Bristol, United Kingdom: Institute of Physics Publishing. doi: 10.1088/1742-6596/1063/1/012180
Stephan, Andrew J. E., Daniel, William J. T. and Elford, Michael C. (2018). A GPU Based Explicit Solid-Shell Finite Element Solver. NUMISHEET 2018: 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Tokyo, Japan, 30 July - 3 August 2018. Bristol, United Kingdom: Institute of Physics Publishing. doi: 10.1088/1742-6596/1063/1/012191
Sun, Yong, Qian, Zhen, Luzin, Vladimir, Daniel, William J. T., Zhang, Mingxing and Ding, Shichao (2017). Numerical investigation of residual stresses in chain-die formed AHSS U-Channels. International Conference on Residual Stresses, Sydney, Australia, 3 July - 7 July 2016. Millersville, PA, United States: Materials Research Forum. doi: 10.21741/9781945291173-1
Wang, Chenhao, Daniel, William J. T., Lu, Haibo, Liu, Sheng and Meehan, Paul A. (2017). An experimental and numerical study on forming force, fracture behavior, and strain states in two point incremental forming process. Pfaffikon, Switzerland: Scientific.Net. doi: 10.4028/www.scientific.net/KEM.725.586
Sun, Yong, Khan, Sabrina, Qian, Zhen, Daniel, William J. T., Meehan, Paul A., Yanagimoto, Jun and Ding, Shichao (2017). Determination of microstructure evolution in metallic components introduced by Chain-die forming. International Conference on the Technology of Plasticity, ICTP 2017, Cambridge, United Kingdom, 17-22 September 2017. Amsterdam, The Netherlands: Elsevier. doi: 10.1016/j.proeng.2017.10.886
Wang, Chenhao, Daniel, William J.T., Lu, Haibo, Liu, Sheng and Meehan, Paul A. (2017). FEM Investigation of Ductile Fracture Prediction in Two-Point Incremental Sheet Metal Forming process. International Conference on the Technology of Plasticity, ICTP 2017, Cambridge, United Kingdom, September 17, 2017-September 22, 2017. Amsterdam, NX Netherlands: Elsevier . doi: 10.1016/j.proeng.2017.10.838
Qian, Zhen, Shi, Lei, Xiao, Hua, Zhang, Jichao, Sun, Yong, Meehan, Paul A., Daniel, William J.T. and Ding, Shichao (2017). Utilizing 2-D and 3-D simulations in assisting tooling design in Chain-die forming threshold product. International Conference on the Technology of Plasticity, ICTP 2017, Cambridge, United Kingdom, September 17, 2017-September 22, 2017. Amsterdam, NX Netherlands: Elsevier . doi: 10.1016/j.proeng.2017.10.882
Daniel, W. J. T., Mackay, I. and Jeude, B. (2017). Realistic modelling of squat cracks. 9th Australasian Congress on Applied Mechanics, ACAM 2017, Sydney, NSW Australia, 27-29 November 2017 . Barton, ACT Australia: Engineers Australia.
Wang, Chenhao, Daniel, William J.T., Kearney, Michael, Lu, Haibo, Liu, Sheng and Meehan, Paul A. (2017). A damage model-based force feedback strategy for on-line fracture prediction in two-point incremental metal forming. 9th Australasian Congress on Applied Mechanics, ACAM 2017, Sydney, NSW Australia, 27-29 November 2017 . Barton, ACT Australia: Engineers Australia.
Qian, Zhen, Sun, Yong, Shi, Lei, Meehan, Paul A., Daniel, William J.T. and Ding, Shichao (2016). FEM parametric study of Chain-die formed U-channel AHSS products. The 1st International Conference on Automobile Steel (ICAS2016) & The 3rd International Conference on High Manganese Steels (HMnS2016), Chengdu, Peoples Republic of China, 16-18 November 2016. Chengdu, Peoples Republic of China: The Chinese Society for Metals Central Iron and Steel Research Institute.
Sun, Yong, Li, Yaguang, Han, Fei, Liu, Zhaobing, Daniel, W. J. T. (Bill), Li, Dayong, Shi, Lei and Ding, Shichao (2015). The experimental investigation on chain-die forming U-profiled AHSS products. Chinese Society for Metals (CSM) Steel Conference, Shanghai, China, 21-23 October 2015.
Sun, Yong, Li, Yaguang, Liu, Zhaobing, Daniel, W.J.T., Li, Dayong and Ding, Shichao (2015). A New Residual Stress Measurement Method for Roll Formed Products. Chinese Society for Metals (CSM) Steel Conference, China, 21-23 October 2015. Metallurgical Industry Press.
Liu, Sheng, Tian, Ye, Daniel, W. J. T. and Meehan, Paul A. (2015). Modelling of track wear damage due to changes in friction conditions: A comparison between AC and DC electric drive locomotives. CM 2015 - 10th International Conference on Contact Mechanics of Wheel / Rail Systems, Colorado Springs, CO United States, 30 August - 3 September 2015. International Conference on Contact Mechanics of Wheel / Rail Systems.
Tian, Y., Daniel, W. J. T., Liu, S. and Meehan, P. A. (2014). Fuzzy logic creep control for a 2D locomotive dynamic model under transient wheel-rail contact conditions. 14th International Conference on Railway Engineering Design and Optimization, COMPRAIL 2014, Rome, June 24, 2014-June 26, 2014. Southampton, Hants, United Kingdom: WITPress. doi: 10.2495/CR140741
Daniel, William J. T., Li, Yanle, Liu, Zhaobing and Meehan, Paul A. (2014). Analytical prediction of strains and forming forces in incremental forming. ACAM 8: 8th Australasian Congress on Applied Mechanics, Melbourne, VIC, Australia, 23-26 November, 2014. Barton, ACT, Australia: Engineers Australia.
Liu, Zhaobing, Li, Yanle, Daniel, Bill and Meehan, Paul (2014). An analytical model for deformation path design in multistage incremental sheet forming process. 16th International Conference on Advances in Materialsand Processing Technologies (AMPT 2013), Taipei, Taiwan, 22-26 September 2013. Pfaffikon, Switzerland: Scientific.Net. doi: 10.4028/www.scientific.net/AMR.939.245
Li, Yanle, Liu, Zhaobing, Lu, Haibo, Daniel, W. J. T. (Bill) and Paul, Paul A. (2014). Experimental study and efficient prediction on forming forces in incremental sheet forming. 16th International Conference on Advances in Materialsand Processing Technologies (AMPT 2013), Taipei, Taiwan, 22-26 September 2013. Pfaffikon, Switzerland: Scientific.Net. doi: 10.4028/www.scientific.net/AMR.939.313
Liu, Zhaobing, Li, Yanle, Daniel, Bill and Meehan, Paul (2014). Taguchi optimization of process parameters for forming time in incremental sheet forming process. 15th International Conference on Advances in Materials and Processing Technologies, AMPT 2012, Wollongong, NSW, Australia, 23 September 2012. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.773-774.137
Tian, Ye, Daniel, W. J. T. (Bill), Liu, Sheng and Meehan, Paul A. (2013). Dynamic tractional behaviour analysis and control for a DC locomotive. WCRR 2013: 10th World Congress of Railway Research, Sydney, NSW, Australia, 25-28 November, 2013.
Farjoo, Mohammadaili, Daniel, William and Meehan, Paul A. (2012). Stress intensity factors around a 3D squat form crack on a rail surface laid on an elastic foundation. 9th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems (CM 2012), Chengdu, China, 27-30 August 2012. China: Southwest Jiaotaong University, State Key Laboratory of Traction Power.
Farjoo, M., Pal, S., Daniel, W. and Mackie, S. (2012). Squat formation and propagation: metallurgical and mechanical points of view. CORE 2012: Conference on Railway Engineering, Brisbane, Australia, 10-12 September 2012.
Daniel, Bill (W. J. T.), Jones, Rhys, Mohan, Sajith, Pal, Sarvesh, Farjoo, Mohammadalli and Kerr, Malcolm (2011). An investigation of rail squats from several perspectives. 9th World Congress on Railway Research (WCRR 2011), Lille, France, 22 - 26 June 2011. France: SNCF.
Valente, Carlos, Daniel, William J. T. and Meehan, Paul A. (2010). Metallurgical study of rail squats. CORE 2010 Conference on Railway Engineering, Wellington, New Zealand, 12-14 December 2010. Wellington, New Zealand: Engineers Australia.
Meehan, P. A., Bellette, P., Daniel, W. J. T., Horwood, R., Petticrew, N. and Orange, N. (2010). Model-based estimation of rail profile based on axlebox accelerometers. CORE 2010: Rail, Rejuvenation and Renaissance, Wellingon, New Zealand, 12-14 December 2010. Wellington, New Zealand: Engineers Australia.
Galakhar, A., Daniel, W.J.T. and Meehan, P.A. (2009). Prediction of Roll Profile Wear in the Cold Roll Forming Process. Switzerland: Trans Tech Publications Ltd.. doi: 10.4028/www.scientific.net/KEM.410-411.643
Bellette, P.A., Meehan, P.A. and Daniel, W.J.T. (2009). Tangent track corrugation model validation with a two disk test rig. 8th International Conference on contact Mechanics and Wear of Rail/Wheel Systems, Firenze, Italy, 15-18 September, 2009. Italy: AB Editore.
Vuong, T.T., Meehan, P.A., Eadie, D.T., Oldknow, K., Elvidge, D., Bellette, P.A. and Daniel, W.J.T. (2009). Investigation of a transitional wear model for wear prediction and control in rolling contact. 8th International Conference on contact Mechanics and Wear of Rail/Wheel Systems, Firenze, Italy, 15-18 September, 2009. Italy: AB Editore.
Batten, R.D., Bellette, P.A., Meehan, P.A., Horwood, R.J. and Daniel, W.J.T. (2009). Field and theoretical investigation of the mechanism of corrugation wavelength fixation under speed variation. 8th International Conference on contact Mechanics and Wear of Rail/Wheel Systems, Firenze, Italy, 15-18 September, 2009. Italy: AB Editore.
Ding, S., Daniel, W. J. T., Yuan, J. and Zhang, Y. (2008). Making roll forming flexible-introduction to Chain forming. ITA International Conference on Innovations and Technical Realities for Tube and Pipe Production, Pipe Dream India 2008, Osaka, Japan, 13 - 14 June 2011. Red Hook, NY United States: Curran Associates Inc.
Bellette, P. A., Meehan, P. A. and Daniel, W. J T (2007). A model of the wear due to the rolling contact of a wheel over a general rail profile. 14th International Congress on Sound and Vibration 2007, ICSV 2007, , , July 9, 2007-July 12, 2007.
Galakhar, A. S., Meehan, P. A., Daniel, W. J. T. and Ding, S. C. (2007). A method of approximate tool wear analysis in cold roll forming. 5th Australasian Congress on Applied Mechanics (ACAM 2007), Brisbane, Australia, 10-12 December, 2007. Brisbane: Engineers Australia.
Batten, R. D., Meehan, P. A., Daniel, W. J. T., Bellette, P. A. and Horwood, R. J. (2007). The effects of passing speed distribution on rail corrugation growth rate. 5th Australasian Congress on Applied Mechanics (ACAM 2007), Brisbane, Australia, 10-12 December, 2007. Brisbane: Engineers Australia.
Daniel, W. J. T. and Meehan, P. A. (2007). Implicit finite element study of non-steady effects in cold roll forming. 5th Australasian Congress on Applied Mechanics (ACAM 2007), Brisbane, Australia, 10-12 December, 2007. Brisbane: Engineers Australia.
Bellette, P., Meehan, P.A. and Daniel, W.J.T. (2007). A model of the wear due to the rolling contact of a wheel over a general rail profile. ICSV14, Cairns, Australia, 9-12 July 2007. Australia: International Institute of Acoustics.
Meehan, P. A., Bellette, P., Daniel, W. J. T. and Horwood, R. (2007). A case study on the effect of speed variation on the growth of wear-type rail corrugation. ICSV14, Cairns, Australia, 9-12 July 2007. Australia: International Institute of Acoustics.
Bellette, P. A., Meehan, P A and Daniel, W J T (2006). Investigation into the effect of speed variation on the growth of wear-type rail corrugation. First Australasian Acoustical Societies' Conference, Christchurch, New Zealand, 20-22 November 2006. Australia and New Zealand: The Australian Acoustical Society, New Zealand Acoustical Society.
Daniel, W J T, Horwood, R J, Meehan, P A and Wheatley, N (2006). Wear-type rail corrugation prediction: Field study. Conference on Railway Engineering CORE 2006, 30 April - 03 May 2006, Melbourne, Victoria, Australia. Australia: Engineers Australia.
Daniel, W J T, Horwood, R J, Meehan, P A and N, N (2006). Analysis of rail corrugation in cornering. 7th International Conference on Contract Mechanics and Wear of Rail/Wheel Systems, Brisbane, Australia, 25-27 September 2006. Brisbane, Australia: Institute of Materials Engineering.
Meehan, P A and Daniel, W J T (2006). Effects of wheel passing frequency on wear-type corrugations. 7th International Conference on Contract Mechanics and Wear of Rail/Wheel Systems, Brisbane, Australia, 25-27 September 2006. Brisbane, Australia: Institute of Materials Engineering.
Ding, S., Daniel, W. J. T. and Meehan, P. A. (2006). A new relaxation method for roll forming problems. III European Conference on Computional Mechanics Solids, Structures and Coupled Problems in Engineering, Lisbon, Portugal, 5-8 June 2006. Amsterdam, The Netherlands: Springer. doi: 10.1007/1-4020-5370-3_536
Meehan, P. A., Daniel, W. J T and Campey, T. (2005). Prediction of the growth of wear-type rail corrugation. doi: 10.1016/j.wear.2004.03.049
Metzger, K. A., Daniel, W. J. T. and Ross, C. F. (2005). Comparison of beam theory and finite-element analysis with in vivo bone strain data from the alligator cranium. USA: John Wiley & Sons Inc. doi: 10.1002/ar.a.20167
Nazari, A., Guan, Z., Daniel, W.J.T. and Gurgenci, H. (2005). Analytical methods for better design and repair of mechanical welded structures. Proceedings of the 2005 Australian Mining Technology Conference, Freemantle, Western Australia, 27-28 September 2005. Carlton, Victoria, Australia: The Australasian Institute of Mining and Metallurgy.
Meehan, P. A. and Daniel, W.J.T. (2004). Wear-type rail corrugation prediction: passage time delay effects. Proceedings of Acoustics 2004, Gold Coast, Australia, 3-5 November 2004. Darlinghurst, NSW, Australia: Australian Acoustical Society.
Nazari, A., Guan, Z., Daniel, W.J.T. and Gurgenci, H. (2004). Life estimation for structural welded joints based on hot spot stresses. CRCMining Conference, Noosa Head, Queensland, Australia, 15-16 June 2004. Brisbane, Australia: Cooperative Research Centre - Mining (CRCMining).
Jokic, MD and Daniel, WJT (2004). Aerogravity-assist maneuvering of a tethered satellite system. USA: American Institute of Aeronaut Astronaut. doi: 10.2514/1.11036
Meehan, P. A., Daniel, W.J.T. and Campey, T. J. (2003). Wear-type rail corrugation predication and prevention. Proceedings 6th International Conference in Mechanics and Wear of Rail/wheel Systems (CM2003), Sweden, 10-13 June 2003. Sweden: Vasastadens Bokbinderi AB.
Daniel, W.J.T. and Meehan, P. A. (2003). Issues in dynamic modelling to predict growth of rail corrugations. Asia-Pacific Vibration Conference, Gold Coast, Australia, 12-14 November 2003. Brisbane, Australia: Queensland University of Technology.
Jokic, M. D., Daniel, W. J. T., Asokanthan, S. F. and Mee, D. J. (2002). Aeroassisted maneuvering of elastic tethered systems using a dissipative time-stepping algorithm. 40th AIAA Aerospace Sciences Meeting, Reno, Nevada, USA, 14-17 January, 2002. USA: AIAA. doi: 10.2514/6.2002-1135
Daniel, W. J. T. (2002). Combined stiffness and damping control of hourglass motion. Fifth World Congress on Computational Mechanics, Vienna, Austria, 7-12 July, 2002. Vienna, Austria: Vienna University of Technology.
Jokic, Michael D., Daniel, William J. T. and Longuski, James M. (2002). 3D modeling of an elastic tether using a dissipative time-stepping algorithm. American Institute of Aeronautics and Astronautics Inc.. doi: 10.2514/6.2002-4643
Jokic, M. D., Asokanthan, S. F., Daniel, W. J. T. and Mee, D. J. (2001). Aerogravity assist manoeuvring of a tethered satellite system. AIAA Atmospheric Flight Mechanics Conference and Exhibit, Montreal, Canada, 6-9 August, 2001. USA: American Institute of Aeronautics and Astronautics. doi: 10.2514/6.2001-4071
Daniel, W. J. T. (2001). Multi-timestep integration in computational dynamics. NATO Advanced Research Workshop on Computational Aspects of Nonlinear Structural Systems with Large Rigid Body Motion, Pultusk, Poland, 2-7 July, 2000. Amsterdam, Netherlands: IOS Press.
Daniel, W. J. T. (1999). Three dimensional orthotropic viscoelastic finite element model of a human ligament. 5th US National Congress on Computational Mechanics, Boulder, Colorado, 4-6 August 1999. Boulder, Colorado: The University of Colorado.
Daniel W.J.T. (1993). Finite element modelling of dynamic powder compaction. Proceedings of the 1st Conference on Dynamic Loading in Manufacturing and Service, Melbourne, Aust, February 9, 1993-February 11, 1993. Publ by IE Aust.
Kwong P.K.Y., Daniel W.J.T. and Page N.W. (1993). Terminal ballistics of microprojectiles on organic targets. Proceedings of the 1st Conference on Dynamic Loading in Manufacturing and Service, Melbourne, Aust, February 9, 1993-February 11, 1993.
Patent
Meehan, P.A., Daniel, W.J.T. and Ding, S. (2008). Assembly and method for press forming a deformable material. WO/2008/144832.
Department Technical Report
Galakhar, Alexander S., Daniel, William J. T. and Meehan, Paul A. (2006). Review of Contact and Dynamic Phenomena in Cold Roll Forming. ARC Linkage Project Report (LP0560270), 2006/16. School of Engineering, The University of Queensland.
Thesis
Daniel, William John Trevor (1979). Strategies for finite element eigenvalue analysis of structures enclosing fluids. PhD Thesis, School of Engineering, The University of Queensland. doi: 10.14264/uql.2014.490
Research Reports
Meehan, P. A., Daniel, W.J.T. and Campey, T. J. (2003). Rail corrugation growth prediction via stability analysis. St. Lucia: Div. of Mech. Eng., The Univ. of Qld..
Horwood, R. J., Meehan, P. A. and Daniel, W.J.T. (2003). Initial Possum measurements of corrugation on the Beenleigh line. St. Lucia: Div. of Mech. Eng., The Univ. of Qld..
Campey, T. J., Meehan, P. A. and Daniel, W. J. T. (2003). Field testing of the Possum rail corrugation measurement device. St. Lucia: Division of Mechanical Engineering, The University of Queensland.
Daniel, W. J. T. (2002). Finite element models used to study rail corrugation. Brisbane: Division of Mechanical Engineering, The Univ. of Qld..