Emeritus Professor Hal Gurgenci
Research Leader in Power-Generation Cycles
Emeritus Professor
School of Mechanical and Mining Engineering
Researcher biography
Professor Gurgenci's current research interests include energy systems analysis; geothermal and concentrating solar thermal power plant technologies; development of intelligent tutoring and compterised assessment systems for teaching machine design.
Hal Gurgenci, Professor of Mechanical Engineering, has many years of industry and academic experience in solar energy, manufacturing and mining. Professor Gurgenci is the Founding Director of the Queensland Geothermal Energy Centre of Excellence (QGECE).
Publications
Book Chapters
Hooman, K., Guan, Z. and Gurgenci, H. (2017). Advances in dry cooling for concentrating solar thermal (CST) power plants. Advances in concentrating solar thermal research and technology. (pp. 179-212) edited by Manuel J. Blanco and Lourdes Ramirez Santigosa. Duxford, United Kingdom: Woodhead Publishing . doi: 10.1016/B978-0-08-100516-3.00009-5
Guan, Zhiqiang, Hooman, Kamel and Gurgenci, Hal (2016). Dry cooling towers for geothermal power plants. Alternative Energy and Shale Gas Encyclopedia. (pp. 333-349) edited by Jay H. Lehr, Jack Keeley and Thomas B. Kingery. Hoboken, NJ, United States: John Wiley & Sons. doi: 10.1002/9781119066354.ch32
Bongers, Daniel R. and Gurgenci, Hal (2008). Fault detection and identification for longwall machinery using SCADA Data. Complex system maintenance handbook. (pp. 611-641) edited by Khairy A.H. Kobbacy and D.N.Prabhakar Murthy. London, United Kingdom: Springer. doi: 10.1007/978-1-84800-011-7_25
Townson, P., Murthy, D.N.P. and Gurgenci, H. (2003). Optimization of Dragline Load. Case Studies in Reliability and Maintenance. (pp. 517-544) edited by Wallace R. Blischke and D.N. Prabhakar Murthy. New Jersey, USA and Canda: John Wiley and Sons, Inc. doi: 10.1002/0471393002.ch23
Journal Articles
Ray, Alok K., Rakshit, Dibakar, Ravi Kumar, K. and Gurgenci, Hal (2024). Assessment of thermofluidic behaviour of a Medium-High-Temperature shell and tube latent heat storage through experimental and computational investigation. Thermal Science and Engineering Progress 102969, 102969. doi: 10.1016/j.tsep.2024.102969
Ray, Alok K., Rakshit, Dibakar, Kumar, K. Ravi and Gurgenci, Hal (2024). Combined passive enhancement techniques improve the thermal performance of latent heat storage system: A design anomaly?. International Journal of Thermal Sciences, 197 108786, 108786. doi: 10.1016/j.ijthermalsci.2023.108786
Ray, Alok K., Rakshit, Dibakar, Kumar, K. Ravi and Gurgenci, Hal (2023). Transient discharge performance of high-temperature latent storage system integrated with supercritical CO2 Brayton cycle: a combined analytical and numerical study. Journal of Energy Storage, 72 108466, 108466. doi: 10.1016/j.est.2023.108466
Uddin, Md., Gurgenci, Halim and Guan, Zhiqiang (2023). Pressure profile and stiffness analysis of supercritical CO2 inside a rotating annulus cooling passage using computational fluid dynamics. Journal of Tribology-Transactions of the ASME, 145 (11) 114102. doi: 10.1115/1.4062812
Uddin, Md., Gurgenci, Halim, Klimenko, Alex and Guan, Zhiqiang (2023). Heat transfer analysis of supercritical CO2 in a high-speed turbine rotor shaft cooling passage. Thermal Science and Engineering Progress, 39 101694, 1-10. doi: 10.1016/j.tsep.2023.101694
Lee, Sangkyoung, Mee, David J., Guan, Zhigiang and Gurgenci, Hal (2023). Optimum combination of diesel and concentrating solar in remote area power generation using supercritical CO2 turbines. Energy Conversion and Management, 278 116714, 116714. doi: 10.1016/j.enconman.2023.116714
Ehsan, M. Monjurul, Awais, Muhammad, Lee, Sangkyoung, Salehin, Sayedus, Guan, Zhiqiang and Gurgenci, Hal (2023). Potential prospects of supercritical CO2 power cycles for commercialisation: applicability, research status, and advancement. Renewable and Sustainable Energy Reviews, 172 113044. doi: 10.1016/j.rser.2022.113044
Ray, Alok K., Rakshit, Dibakar, Ravi Kumar, K. and Gurgenci, Hal (2023). Strength-Weakness-Opportunities-Threats-Unusual (SWOT-U) behavior analysis of silicon as phase change material for high-temperature latent heat storage. Thermal Science and Engineering Progress, 38 101627, 1-16. doi: 10.1016/j.tsep.2022.101627
Sui, Xin, Russell, Hugh, Gurgenci, Hal, Lee, Sangkyoung, Guan, Zhiqiang and Dong, Peixin (2022). A one-dimensional modelling methodology of printed circuit heat exchangers for steady, off-design and transient feasibility in a supercritical CO2 power block. International Journal of Heat and Mass Transfer, 193 122938, 122938. doi: 10.1016/j.ijheatmasstransfer.2022.122938
Li, Jun, Gurgenci, Hal, Guan, Zhiqiang, Li, Jishun, Li, Lun and Xue, Yujun (2022). Multi-objective optimization of a small scale SCO2 turbine rotor system with a shaft cooler. Mechanics and Industry, 23 21, 1-17. doi: 10.1051/meca/2022018
Lee, Sankyoung, Mee, David J., Guan, Zhigiang and Gurgenci, Hal (2022). Off-Design Performance Prediction of Supercritical Co2 Radial Inflow Turbines. SSRN Electronic Journal, 1-28. doi: 10.2139/ssrn.4166502
Li, Jun, Gurgenci, Hal, Guan, Zhiqiang, Li, Jishun, Xue, Yujun and Li, Lun (2022). Thermal management and dynamic performance of a cooler design for the supercritical Co2 turbine shaft cooling. Frontiers in Energy Research, 10 839898, 1-17. doi: 10.3389/fenrg.2022.839898
Ray, Alok Kumar, Rakshit, Dibakar, Ravi Kumar, K. and Gurgenci, Hal (2021). A comparative study of high-temperature latent heat storage systems. Energies, 14 (21) 6886, 6886. doi: 10.3390/en14216886
Uddin, Md., Gurgenci, Halim, Guan, Zhiqiang, Klimenko, Alex, Li, Jun, Li, Jishun and Li, Lun (2021). Design a cooling pillow to support a high-speed supercritical CO2 turbine shaft. Applied Thermal Engineering, 196 117345, 1-10. doi: 10.1016/j.applthermaleng.2021.117345
Ray, Alok K., Rakshit, Dibakar, Ravi Kumar, K. and Gurgenci, Hal (2021). Silicon as high-temperature phase change medium for latent heat storage: a thermo-hydraulic study. Sustainable Energy Technologies and Assessments, 46 101249, 101249. doi: 10.1016/j.seta.2021.101249
Dong, Peixin, Li, Xiaoxiao, Guan, Zhiqiang, Gurgenci, Hal, Zhang, Liang and Feng, Junjie (2021). Starting up a practical natural draft cooling system: experimental and theoretical study on transients. International Communications in Heat and Mass Transfer, 126 105444, 1-14. doi: 10.1016/j.icheatmasstransfer.2021.105444
Lee, Sangkyoung, Yaganegi, Grant, Mee, David J., Guan, Zhigiang and Gurgenci, Hal (2021). Part-load performance prediction model for supercritical CO2 radial inflow turbines. Energy Conversion and Management, 235 113964, 1-11. doi: 10.1016/j.enconman.2021.113964
Li, Jun, Gurgenci, Hal, Li, Jishun, Li, Lun, Guan, Zhiqiang and Yang, Fang (2021). Optimal design to control rotor shaft vibrations and thermal management on a supercritical CO2 microturbine. Mechanics and Industry, 22 22, 1-15. doi: 10.1051/meca/2021023
Li, Jun, Gurgenci, Hal, Li, Jishun, Guan, Zhiqiang, Li, Lun and Xue, Yujun (2021). Numerical investigation on the cooling performance of a novel jet cooler design for a supercritical CO2 turbine rotor shaft cooling. Mechanics and Industry, 22 51, 51. doi: 10.1051/meca/2021049
Dong, Peixin, Wang, Jianyong, Li, Xiaoxiao, Guan, Zhiqiang, Gurgenci, Hal and Hooman, Kamel (2020). Structural improvement to accelerate the start-up process of natural draft dry cooling towers in dispatchable power plants. Applied Thermal Engineering, 181 116017, 116017. doi: 10.1016/j.applthermaleng.2020.116017
Ehsan, M. Monjurul, Guan, Zhiqiang, Gurgenci, Hal and Klimenko, Alexander (2020). Feasibility of dry cooling in supercritical CO2 power cycle in concentrated solar power application: review and a case study. Renewable and Sustainable Energy Reviews, 132 110055, 1-24. doi: 10.1016/j.rser.2020.110055
Monjurul Ehsan, M., Guan, Zhiqiang, Gurgenci, Hal and Klimenko, Alexander (2020). Novel design measures for optimizing the yearlong performance of a concentrating solar thermal power plant using thermal storage and a dry-cooled supercritical CO2 power block. Energy Conversion and Management, 216 112980, 112980. doi: 10.1016/j.enconman.2020.112980
Lee, Sangkyoung and Gurgenci, Hal (2020). A comparison of three methodological approaches for meanline design of supercritical CO2 radial inflow turbines. Energy Conversion and Management, 206 112500, 112500. doi: 10.1016/j.enconman.2020.112500
Monjurul Ehsan, M., Duniam, Sam, Li, Jishun, Guan, Zhiqiang, Gurgenci, Hal and Klimenko, Alexander (2020). A comprehensive thermal assessment of dry cooled supercritical CO2 power cycles. Applied Thermal Engineering, 166 114645. doi: 10.1016/j.applthermaleng.2019.114645
Wang, Jianyong, Guan, Zhiqiang, Gurgenci, Hal, Sun, Yubiao and Hooman, Kamel (2020). A comprehensive review on numerical approaches to simulate heat transfer of turbulent supercritical CO2 flows. Numerical Heat Transfer, Part B: Fundamentals, 77 (5), 1-52. doi: 10.1080/10407790.2020.1720440
Dong, Peixin, Kaiser, Antonio S., Guan, Zhiqiang, Li, Xiaoxiao, Gurgenci, Hal and Hooman, Kamel (2019). A novel method to predict the transient start-up time for natural draft dry cooling towers in dispatchable power plants. International Journal of Heat and Mass Transfer, 145 118794, 118794. doi: 10.1016/j.ijheatmasstransfer.2019.118794
Ehsan, M. Monjurul, Duniam, Sam, Guan, Zhiqiang, Gurgenci, Hal and Klimenko, Alexander (2019). Seasonal variation on the performance of the dry cooled supercritical CO2 recompression cycle. Energy Conversion and Management, 197 111865, 111865. doi: 10.1016/j.enconman.2019.111865
Sun, Yubiao, Duniam, Sam, Guan, Zhiqiang, Gurgenci, Hal, Dong, Peixin, Wang, Jianyong and Hooman, Kamel (2019). Coupling supercritical carbon dioxide Brayton cycle with spray-assisted dry cooling technology for concentrated solar power. Applied Energy, 251 113328, 113328. doi: 10.1016/j.apenergy.2019.113328
Ehsan, M. Monjurul, Duniam, Sam, Li, Jishun, Guan, Zhiqiang, Gurgenci, Hal and Klimenko, Alexander (2019). Effect of cooling system design on the performance of the recompression CO2 cycle for concentrated solar power application. Energy, 180, 480-494. doi: 10.1016/j.energy.2019.05.108
Wang, Jianyong, Li, Jishun, Gurgenci, Hal, Veeraragavan, Ananthanarayanan, Kang, Xin and Hooman, Kamel (2019). Computational investigations on convective flow and heat transfer of turbulent supercritical CO2 cooled in large inclined tubes. Applied Thermal Engineering, 159 113922, 113922. doi: 10.1016/j.applthermaleng.2019.113922
Dong, Peixin, Li, Xiaoxiao, Hooman, Kamel, Sun, Yubiao, Li, Jishun, Guan, Zhiqiang and Gurgenci, Hal (2019). The crosswind effects on the start-up process of natural draft dry cooling towers in dispatchable power plants. International Journal of Heat and Mass Transfer, 135, 950-961. doi: 10.1016/j.ijheatmasstransfer.2019.02.039
Dong, Peixin, Li, Xiaoxiao, Sun, Yubiao, Hooman, Kamel, Guan, Zhiqiang, Dai, Yuchen and Gurgenci, Hal (2019). Numerical investigation of the influence of local effects on the transient start-up process of natural draft dry cooling towers in dispatchable power plants. International Journal of Heat and Mass Transfer, 133, 166-178. doi: 10.1016/j.ijheatmasstransfer.2018.12.066
Wang, Jianyong, Guan, Zhiqiang, Gurgenci, Hal, Veeraragavan, Ananthanarayanan, Kang, Xin and Hooman, Kamel (2019). A computationally derived heat transfer correlation for in-tube cooling turbulent supercritical CO2. International Journal of Thermal Sciences, 138, 190-205. doi: 10.1016/j.ijthermalsci.2018.12.045
Balaji, Vishak and Gurgenci, Hal (2019). Search for optimum renewable mix for Australian off-grid power generation. Energy, 175, 1234-1245. doi: 10.1016/j.energy.2019.03.089
Sun, Yubiao, Guan, Zhiqiang, Gurgenci, Hal, Wang, Jianyong, Dong, Peixin and Hooman, Kamel (2019). Spray cooling system design and optimization for cooling performance enhancement of natural draft dry cooling tower in concentrated solar power plants. Energy, 168, 273-284. doi: 10.1016/j.energy.2018.11.111
Li, Xiaoxiao, Gurgenci, Hal, Guan, Zhiqiang, Wang, Xurong and Xia, Lin (2018). A review of the crosswind effect on the natural draft cooling towers. Applied Thermal Engineering, 150, 250-270. doi: 10.1016/j.applthermaleng.2018.12.147
Wang, Jianyong, Guan, Zhiqiang, Gurgenci, Hal, Veeraragavan, Ananthanarayanan, Kang, Xin, Sun, Yubiao and Hooman, Kamel (2018). Numerical study on cooling heat transfer of turbulent supercritical CO2 in large horizontal tubes. International Journal of Heat and Mass Transfer, 126 (B), 1002-1019. doi: 10.1016/j.ijheatmasstransfer.2018.06.070
Dong, Peixin, Li, Xiaoxiao, Guan, Zhiqiang and Gurgenci, Hal (2018). The transient start-up process of natural draft dry cooling towers in dispatchable thermal power plants. International Journal of Heat and Mass Transfer, 123, 201-212. doi: 10.1016/j.ijheatmasstransfer.2018.02.114
Sun, Yubiao, Guan, Zhiqiang, Gurgenci, Hal, Hooman, Kamel and Li, Xiaoxiao (2018). Investigations on the influence of nozzle arrangement on the pre-cooling effect for the natural draft dry cooling tower. Applied Thermal Engineering, 130, 979-996. doi: 10.1016/j.applthermaleng.2017.10.171
Wang, Jianyong, Guan, Zhiqiang, Gurgenci, Hal, Hooman, Kamel, Veeraragavan, Anand and Kang, Xin (2018). Computational investigations of heat transfer to supercritical CO2 in a large horizontal tube. Energy Conversion and Management, 157, 536-548. doi: 10.1016/j.enconman.2017.12.046
Li, Xiaoxiao, Gurgenci, Hal, Guan, Zhiqiang, Wang, Xurong and Duniam, Sam (2017). Measurements of crosswind influence on a natural draft dry cooling tower for a solar thermal power plant. Applied Energy, 206, 1169-1183. doi: 10.1016/j.apenergy.2017.10.038
Sun, Yubiao, Guan, Zhiqiang, Gurgenci, Hal, Li, Xiaoxiao and Hooman, Kamel (2017). A study on multi-nozzle arrangement for spray cooling system in natural draft dry cooling tower. Applied Thermal Engineering, 124, 795-814. doi: 10.1016/j.applthermaleng.2017.05.157
Sun, Yubiao, Guan, Zhiqiang, Gurgenci, Hal, Hooman, Kamel, Li, Xiaoxiao and Xia, Lin (2017). Investigation on the influence of injection direction on the spray cooling performance in natural draft dry cooling tower. International Journal of Heat and Mass Transfer, 110, 113-131. doi: 10.1016/j.ijheatmasstransfer.2017.02.069
Li, Xiaoxiao, Duniam, Sam, Gurgenci, Hal, Guan, Zhiqiang and Veeraragavan, Anand (2017). Full scale experimental study of a small natural draft dry cooling tower for concentrating solar thermal power plant. Applied Energy, 193, 15-27. doi: 10.1016/j.apenergy.2017.02.032
Li, Xiaoxiao, Xia, Lin, Gurgenci, Hal and Guan, Zhiqiang (2017). Performance enhancement for the natural draft dry cooling tower under crosswind condition by optimizing the water distribution. International Journal of Heat and Mass Transfer, 107, 271-280. doi: 10.1016/j.ijheatmasstransfer.2016.11.046
Li, Xiaoxiao, Gurgenci, Hal, Guan, Zhiqiang and Sun, Yubiao (2017). Experimental study of cold inflow effect on a small natural draft dry cooling tower. Applied Thermal Engineering, 128, 762-771. doi: 10.1016/j.applthermaleng.2017.09.071
Hooman, Kamel, Guan, Zhiqiang and Gurgenci, Hal (2017). Selected papers from the 17th IAHR (International Association for Hydro-Environment Engineering and Research) International Conference on Cooling Tower and Heat Exchanger. Heat Transfer Engineering, 38 (11-12), 1-3. doi: 10.1080/01457632.2016.1216936
Xia, Lin, Li, Jishun, Ma, Wei, Gurgenci, Hal, Guan, Zhiqiang and Wang, Pei (2016). Water consumption comparison between a natural draft wet cooling tower and a natural draft hybrid cooling tower — An annual simulation for luoyang conditions. Heat Transfer Engineering, 38 (11-12), 1-10. doi: 10.1080/01457632.2016.1216975
Lu, Yuanshen, Guan, Zhiqiang, Gurgenci, Hal, Alkhedhair, Abdullah and He, Suoying (2016). Experimental investigation into the positive effects of a tri-blade-like windbreak wall on small size natural draft dry cooling towers. Applied Thermal Engineering, 105, 1000-1012. doi: 10.1016/j.applthermaleng.2016.03.175
Alkhedhair, Abdullah, Jahn, Ingo, Gurgenci, Hal, Guan, Zhiqiang and He, Suoying (2016). Parametric study on spray cooling system for optimising nozzle design with pre-cooling application in natural draft dry cooling towers. International Journal of Thermal Sciences, 104, 448-460. doi: 10.1016/j.ijthermalsci.2016.02.004
Alkhedhair, Abdullah, Jahn, Ingo, Gurgenci, Hal, Guan, Zhiqiang, He, Suoying and Lu, Yuanshen (2016). Numerical simulation of water spray in natural draft dry cooling towers with a new nozzle representation approach. Applied Thermal Engineering, 98, 924-935. doi: 10.1016/j.applthermaleng.2015.10.118
Xia, Lin, Gurgenci, Hal, Liu, Deyou, Guan, Zhiqiang, Zhou, Ling and Wang, Pei (2016). CFD analysis of pre-cooling water spray system in natural draft dry cooling towers. Applied Thermal Engineering, 105, 1051-1060. doi: 10.1016/j.applthermaleng.2016.03.096
He, Suoying, Gurgenci, Hal, Guan, Zhiqiang, Hooman, Kamel, Zou, Zheng and Sun, Fengzhong (2016). Comparative study on the performance of natural draft dry, pre-cooled and wet cooling towers. Applied Thermal Engineering, 99, 103-113. doi: 10.1016/j.applthermaleng.2016.01.060
Alkhedhair, Abdullah, Guan, Zhiqiang, Jahn, Ingo, Gurgenci, Hal and He, Suoying (2015). Water spray for pre-cooling of inlet air for Natural Draft Dry Cooling Towers: experimental study. International Journal of Thermal Sciences, 90, 70-78. doi: 10.1016/j.ijthermalsci.2014.11.029
He, Suoying, Gurgenci, Hal, Guan, Zhiqiang, Huang, Xiang and Lucas, Manuel (2015). A review of wetted media with potential application in the pre-cooling of natural draft dry cooling towers. Renewable and Sustainable Energy Reviews, 44, 407-422. doi: 10.1016/j.rser.2014.12.037
Lu, Yuanshen, Guan, Zhiqiang, Gurgenci, Hal, Hooman, Kamel, He, Suoying and Bharathan, Desikan (2015). Experimental study of crosswind effects on the performance of small cylindrical natural draft dry cooling towers. Energy Conversion and Management, 91, 238-248. doi: 10.1016/j.enconman.2014.12.018
He, Suoying, Guan, Zhiqiang, Gurgenci, Hal, Hooman, Kamel, Lu, Yuanshen and Alkhedhair, Abdullah M. (2015). Experimental study of the application of two trickle media for inlet air pre-cooling of natural draft dry cooling towers. Energy Conversion and Management, 89, 644-654. doi: 10.1016/j.enconman.2014.10.031
Lu, Yuanshen, Gurgenci, Hal, Guan, Zhiqiang and He, Suoying (2014). The influence of windbreak wall orientation on the cooling performance of small natural draft dry cooling towers. International Journal of Heat and Mass Transfer, 79, 1059-1069. doi: 10.1016/j.ijheatmasstransfer.2014.09.012
Russell, Hugh and Gurgenci, Hal (2014). Improving the performance of arid-zone geothermal power plants using seasonal heat storage. Geothermics, 51, 337-343. doi: 10.1016/j.geothermics.2014.03.006
Atrens, Aleks D., Gurgenci, Hal and Rudolph, Victor (2014). Water condensation in carbon-dioxide-based engineered geothermal power generation. Geothermics, 51, 397-405. doi: 10.1016/j.geothermics.2014.03.008
He, Suoying, Guan, Zhiqiang, Gurgenci, Hal, Jahn, Ingo, Lu, Yuanshen and Alkhedhair, Abdullah M. (2014). Influence of ambient conditions and water flow on the performance of pre-cooled natural draft dry cooling towers. Applied Thermal Engineering, 66 (1-2), 621-631. doi: 10.1016/j.applthermaleng.2014.02.070
Reid, A. W., McAree, P. R., Meehan, P. A. and Gurgenci, H. (2014). Longwall shearer cutting force estimation. ASME Journal of Dynamic Systems, Measurement, and Control, 136 (3) 031008, 031008. doi: 10.1115/1.4026326
Zou, Zheng, Guan, Zhiqiang and Gurgenci, Hal (2014). Numerical simulation of solar enhanced natural draft dry cooling tower. Solar Energy, 101, 8-18. doi: 10.1016/j.solener.2013.12.018
He, Suoying, Guan, Zhiqiang, Gurgenci, Hal, Hooman, Kamel, Lu, Yuanshen and Alkhedhair, Abdullah M. (2014). Experimental study of film media used for evaporative pre-cooling of air. Energy Conversion and Management, 87, 874-884. doi: 10.1016/j.enconman.2014.07.084
Zou, Zheng, Guan, Zhiqiang and Gurgenci, Hal (2013). Optimization design of solar enhanced natural draft dry cooling tower. Energy Conversion and Management, 76, 945-955. doi: 10.1016/j.enconman.2013.08.053
Alkhedhair, Abdullah, Gurgenci, Hal, Jahn, Ingo, Guan, Zhiqiang and He, Suoying (2013). Numerical simulation of water spray for pre-cooling of inlet air in natural draft dry cooling towers. Applied Thermal Engineering, 61 (2), 416-424. doi: 10.1016/j.applthermaleng.2013.08.012
Lu, Y., Guan, Z., Gurgenci, H. and Zou, Z. (2013). Windbreak walls reverse the negative effect of crosswind in short natural draft dry cooling towers into a performance enhancement. International Journal of Heat and Mass Transfer, 63, 162-170. doi: 10.1016/j.ijheatmasstransfer.2013.03.075
He, Suoying, Gurgenci, Hal, Guan, Zhiqiang and Alkhedhair, Abdullah M. (2013). Pre-cooling with Munters media to improve the performance of Natural Draft Dry Cooling Towers. Applied Thermal Engineering, 53 (1), 67-77. doi: 10.1016/j.applthermaleng.2012.12.033
Twomey, B., Jacobs, P. A. and Gurgenci, H. (2013). Dynamic performance estimation of small-scale solar cogeneration with an organic Rankine cycle using a scroll expander. Applied Thermal Engineering, 51 (1-2), 1307-1316. doi: 10.1016/j.applthermaleng.2012.06.054
Zou, Zheng, Guan, Zhiqiang, Gurgenci, Hal and Lu, Yuanshen (2012). Solar enhanced natural draft dry cooling tower for geothermal power applications. Solar Energy, 86 (9), 2686-2694. doi: 10.1016/j.solener.2012.06.003
Atrens, Aleks D., Gurgenci, Hal and Rudolph, Victor (2011). Economic optimization of a CO2-based EGS power plant. Energy and Fuels, 25 (8), 3765-3775. doi: 10.1021/ef200537n
Odabaee, Mostafa, Hooman, Kamel and Gurgenci, Halim (2011). Metal foam heat exchangers for heat transfer augmentation from a cylinder in cross-flow. Transport In Porous Media, 86 (3), 911-923. doi: 10.1007/s11242-010-9664-y
Hooman, K. and Gurgenci, H. (2010). Porous medium modeling of air-cooled condensers. Transport in Porous Media, 84 (2), 257-273. doi: 10.1007/s11242-009-9497-8
Atrens, Aleks D., Gurgenci, Hal and Rudolph, Victor (2010). Electricity generation using a carbon-dioxide thermosiphon. Geothermics, 39 (2), 161-169. doi: 10.1016/j.geothermics.2010.03.001
Gurgenci, Halim and Aminossadati, Saiied M. (2009). Investigating the use of methane as diesel fuel in off-road haul road truck operations. Journal of Energy Resources Technology, 131 (3), 032202.1-032202.9. doi: 10.1115/1.3185350
Ejlali, Azadeh, Ejlali, Arash, Hooman, Kamel and Gurgenci, Hal (2009). Application of high porosity metal foams as air-cooled heat exchangers to high heat load removal systems. International Communications in Heat and Mass Transfer, 36 (7), 674-679. doi: 10.1016/j.icheatmasstransfer.2009.03.001
Hooman, Kamel, Gurgenci, Hal and Dincer, I. (2009). Heatline and Energy-Flux-Vector Visualization of Natural Convection in a Porous Cavity Occupied by a Fluid with Temperature-Dependent Viscosity. Journal of Porous Media, 12 (3), 265-275. doi: 10.1615/JPorMedia.v12.i3.60
Atrens, AD, Gurgenci, H and Rudolph, V (2009). CO2 Thermosiphon for Competitive Geothermal Power Generation. ENERGY & FUELS, 23 (1), 553-557. doi: 10.1021/ef800601z
Hooman, K. and Gurgenci, H. (2008). Effects of temperature-dependent viscosity on forced convection inside a porous medium. Transport in Porous Media, 75 (2), 249-267. doi: 10.1007/s11242-008-9220-1
Hooman, Kamel and Gurgenci, Halim (2008). Effects of temperature dependent viscosity on Bénard convection in a porous medium using a non-Darcy model. International Journal of Heat and Mass Transfer, 51 (5-6), 1139-1149. doi: 10.1016/j.ijheatmasstransfer.2007.04.013
Hooman, K. and Gurgenci, H. (2008). Heatline visualization of natural convection in a porous cavity occupied by a fluid with temperature-dependent viscosity. Journal of Heat Transfer, 130 (1) 012501, 1-6. doi: 10.1115/1.2780179
Hooman, Kamel and Gurgenci, H. (2007). Effects of viscous dissipation and boundary conditions on forced convection in a channel occupied by a saturated porous medium. Transport in Porous Media, 68 (3), 301-319. doi: 10.1007/s11242-006-9049-4
Hooman, Kamel, Gurgenci, Hal and Merrikh, Ali A. (2007). Heat transfer and entropy generation optimization of forced convection in a porous-saturated duct of rectangular cross-section. International Journal of Heat and Mass Transfer, 50 (11-12), 2051-2059. doi: 10.1016/j.ijheatmasstransfer.2006.11.015
Nazari, A., Guan, Z., Daniel, W. J. T. and Gurgenci, H. (2007). Parametric study of hot spot stresses around tubular joints with doubler plates. Practice Periodical on Structural Design and Construction, 12 (1), 38-47. doi: 10.1061/(ASCE)1084-0680(2007)12:1(38)
Hooman, Kamel and Gurgenci, Halim (2007). Effects of temperature-dependent viscosity variation on entropy generation, heat and fluid flow through a porous-saturated duct of rectangular cross-section. Applied Mathematics and Mechanics, 28 (1), 69-78. doi: 10.1007/s10483-007-0108-z
Nazari, A., Guan, Z., Daniel, W. J. T. and Gurgenci, H. (2007). Parametric equations using generic representation of joint stiffness. Journal of Offshore Mechanics and Arctic Engineering, 129 (2), 131-137. doi: 10.1115/1.2426998
Hooman, K. and Gurgenci, H. (2007). A theoretical analysis of forced convection in a porous-saturated circular tube: Brinkman-Forchheimer model. Transport In Porous Media, 69 (3), 289-300. doi: 10.1007/s11242-006-9074-3
Qin, Guo-Jun, Hu, Niao-Qing, Guan, Zhi-Qiang and Gurgenci, Hal (2006). Novelty detection of longwall shearer based on cutting current index. Journal of Hunan University of Science and Technology, 21 (2), 55-58.
Kelly, M., Hainsworth, D., Reid, D., Caris, C. and Gurgenci, H. (2005). Longwall automation - An ACARP landmark project. AusIMM Bulletin (2).
Liu, D., Gurgenci, H. and Veidt, M. (2005). In situ damage detection in frame structures through coupled response measurements. Noise and Vibration Worldwide, 36 (9).
Liu, D., Gurgenci, H. and Veidt, M. (2004). Crack detection in welded mechanical structures using coupled vibrations. Acoustics Australia, 32 (2004), 1-13.
Liu, D., Gurgenci, H. and Veidt, M. (2004). In situ damage detection in frame structures through coupled response measurements. Mechanical Systems and Signal Processing, 18 (3), 573-585. doi: 10.1016/S0888-3270(03)00083-9
Liu, D., Gurgenci, H. and Veidt, M. (2003). Crack detection in hollow section structures through coupled response measurements. Journal of Sound and Vibration, 261 (1), 17-29. doi: 10.1016/S0022-460X(02)00922-7
Gurgenci, H. and Guan, Z. (2001). Mobile plant maintenance and the dutymeter concept. Journal of Quality in Maintenance Engineering, 7 (4), 275-285. doi: 10.1108/13552510110407069
Hood, M., Gurgenci, H. and Hatherly, P. (2001). Aspects of mining R&D in Australia. CIM Bulletin, 94 (1046), 71-75.
Gurgenci H. (1986). Performance of power plants with organic Rankine cycles under part-load and off-design conditions. Solar Energy, 36 (1), 45-51. doi: 10.1016/0038-092X(86)90059-9
Mentes, A., Yildirim, O. T., Gürgenci, H., Kakaç, S. and Veziro-glu, T. N. (1983). Effect of heat transfer augmentation on two-phase flow instabilities in a vertical boiling channel. Wärme - und Stoffübertragung, 17 (3), 161-169. doi: 10.1007/BF02570526
Gürgenci, H., Veziroglu, T. N. and Kakaç, S. (1983). Simplified nonlinear descriptions of two-phase flow instabilities in vertical boiling channel. International Journal of Heat and Mass Transfer, 26 (5), 671-679. doi: 10.1016/0017-9310(83)90017-0
Conference Papers
Sui, Xin, Russell, Hugh and Gurgenci, Halim (2023). Dynamic modelling of print circuit heat exchanger in 10MWe supercritical CO2 recompression Brayton cycle. 27th International Conference on Concentrating Solar Power and Chemical Energy Systems: Solar Power and Chemical Energy Systems, SolarPACES 2021, Online, 27 September - 1 October 2021. Melville, NY United States: AIP Publishing. doi: 10.1063/5.0148910
Ray, Alok Kumar, Rakshit, Dibakar, Kumar, K. Ravi and Gurgenci, Hal (2022). Thermal performance of eccentric high-temperature latent heat storage system: passive heat transfer enhancement strategy. EuroSun 2022 - ISES and IEA SHC International Conference on Solar Energy for Buildings and Industry, Kassel, Germany, 25-29 September 2022. Freiburg, Germany: International Solar Energy Society. doi: 10.18086/eurosun.2022.13.17
Lee, Sangkyoung, Mee, David, Guan, Zhiqiang and Gurgenci, Halg (2020). Meanline Design and Off-Design Performance Prediction for Supercritical CO2 Radial Inflow Turbines. 22nd Australasian Fluid Mechanics Conference AFMC2020, Brisbane, Australia, 7-10 December 2020. Brisbane, Australia: The University of Queensland. doi: 10.14264/6ce0260
Ma, Xiqiang, Yang, Fang, Li, Jishun, Guan, Zhiqiang and Gurgenci, Hal (2019). Precision cylindricity error measurement system design and error analysis. 2019 13th International Conference on Sensing Technology (ICST), Sydney, NSW Australia, 2-4 December 2019. NEW YORK: IEEE Computer Society. doi: 10.1109/ICST46873.2019.9047697
Ehsan, M. Monjurul, Guan, Zhiqiang, Gurgenci, H. and Klimenko, A. Y. (2019). Irreversibility and exergy analysis of a recompression supercritical CO2 cycle coupled with dry cooling system. 4th Thermal and Fluids Engineering Conference, TFEC 2019, Las Vegas, NV, United States, 14-17 April 2019. Danbury, CT, United States: Begell House. doi: 10.1615/TFEC2019.mph027494
Li, Jishun, Ma, Xiqiang, Sui, Xin, Yang, Fang, Guan, Zhiqiang and Gurgenci, Hal (2019). Dynamic balance testing system for micro-roller based on MEMS. 2019 13th International Conference on Sensing Technology (ICST), Sydney, NSW, Australia, 2-4 December 2019. Piscataway, NJ, United States: IEEE Computer Society. doi: 10.1109/ICST46873.2019.9047723
Yongjian, Yu, Jishun, Li, Guoding, Chen, Yujun, Xue, Zhuoyi, Si and Gurgenci, Halim (2018). Research on motion error of cylindrical roller bearings under radial load. ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2018, Quebec City, QC Canada, 26 - 29 August 2018. New York, NY United States: American Society of Mechanical Engineers (ASME). doi: 10.1115/DETC2018-85214
Ehsan, M. Monjurul, Duniam, Sam, Lock, Andrew, Dai, Yuchen, Guan, Zhiqiang, Klimenko, A. Y. and Gurgenci, H. (2018). Cooling system design and performance analysis for a supercritical CO2 recompression cycle. 21st Australasian Fluid Mechanics Conference, AFMC 2018, Adelaide, SA Australia, 10-13 December 2018. Perth, WA Australia: Australasian Fluid Mechanics Society.
Meybodi, Mehdi Aghaei, Beath, Andrew, Gwynn-Jones, Stephen, Veeraragavan, Anand, Gurgenci, Hal and Hooman, Kamel (2017). Techno-economic analysis of supercritical carbon dioxide power blocks. SOLARPACES 2016: International Conference on Concentrating Solar Power and Chemical Energy Systems, Abu Dhabi, United Arab Emirates, 1–14 October 2016. Melville, New York, United States: AIP Publishing. doi: 10.1063/1.4984409
Li, Xiaoxiao, Gurgenci, Hal and Guan, Zhiqiang (2016). Performance comparison of the crosswind effect on different size of natural draft dry cooling towers. International Symposium on Industrial Chimneys and Cooling Towers, Rotterdam, The Netherlands, 5-8 October 2016. Rotterdam, The Netherlands: International Symposium on Industrial Chimneys and Cooling Towers.
Xia, Lin , Zhiqiang Guan and Gurgenci, Hal (2016). Pre-cooling performance comparison for water spray system designed by two NDDCT numerical models. International symposium on industrial chimneys and cooling towers, Rotterdam, The Netherlands, 5-8 Oct 2016. Germany: Bergische Universitat Wuppertal.
Li, Xiaoxiao, Guan, Zhiqiang, Gurgenci, Hal, Lu, Yuanshen and He, Suoying (2016). Simulation of the UQ Gatton natural draft dry cooling tower. IAHR International Conference on Cooling Tower and Heat, Gold Coast, QLD, Australia, 7-11 September 2015. Kidlington, Oxford, United Kingdom: Pergamon Press. doi: 10.1016/j.applthermaleng.2016.03.041
Guan, Zhiqiang, Hooman, Kamel and Gurgenci, Hal (2016). A review on crosswind effect and mitigation: a challenge in natural draft cooling tower design. International Symposium on Industrial Chimneys and Cooling Towers, Rotterdam, Netherlands, 5-8 October 2016. Germany: Bergische Universitat Wuppertal.
Guan, Z., Yu, S., Hooman, K., Gurgenci, H. and Barry, J. (2015). Dust characterisation for solar collector deposition and cleaning in a concentrating solar thermal power plant. Heat Exchanger Fouling and Cleaning, Dublin, Ireland, 7-12 June 2015. Dublin, Ireland: International Conference on Heat Exchanger Fouling and Cleaning.
Li, Jishun, Lin, Xia, Ma, Wei, Gurgenci, Hal and Guan, Zhiqiang (2015). Water consumption comparison between a natural draft wet cooling tower and a natural draft hybrid cooling tower – an annual simulation for Luoyang conditions. IAHR International Conference on Cooling Tower and Heat, Gold Coast, QLD, Australia, 7-11 September 2015. Brisbane, Australia: The University of Queensland.
Alkhedhair, Abdullah, Guan, Zhiqiang, Jahn, Ingo and Gurgenci, Hal (2015). Parametric study on spray cooling systems in natural draft dry cooling towers with a new nozzle representation approach. IAHR International Conference on Cooling Tower and Heat, Gold Coast, QLD, Australia, 7-11 September 2015. Brisbane, Australia: The University of Queensland.
Li, Jishun, Song, Tianyi, Li, Xiaoxiao, Gurgenci, Hal and Guan, Zhiqiang (2015). Design of a natural draft dry cooling tower for a 30- mwe concentrating solar thermal plant using a supercritical CO2 cycle. IAHR International Conference on Cooling Tower and Heat, Gold Coast, QLD, Australia, 7-11 September 2015. Brisbane, Australia: The University of Queensland.
Lu, Yuanshen, Guan, Zhiqiang, Gurgenci, Hal, He, Suoying and Alkhedhair, Abdullah (2015). Experimental study on the effects of a tri-blade-like windbreak wall on small size natural draft dry cooling towers. IAHR International Conference on Cooling Tower and Heat, Gold Coast, QLD, Australia, 7-11 September 2015. Brisbane, Australia: The University of Queensland.
Xia, Lin, Guan, Zhiqiang, Gurgenci, Hal and Liu, Deyou (2015). CFD analysis of the water spray system with the vertical arranged nozzle for the pre-cooling in natural draft dry cooling towers. IAHR International Conference on Cooling Tower and Heat, Gold Coast, QLD, Australia, 7-11 September 2015. Brisbane, Australia: The University of Queensland.
Duniam, Sam and Gurgenci, Hal (2015). Annual performance variation of an EGS power plant using an ORC with NDDCT cooling. IAHR International Conference on Cooling Tower and Heat, Gold Coast, QLD, Australia, 7-11 September 2015. Brisbane, Australia: The University of Queensland. doi: 10.1016/j.applthermaleng.2016.04.025
He, Suoying, Guan, Zhiqiang, Gurgenci, Hal, Hooman, Kamel and Alkhedhair, Abdullah M. (2014). Experimental study of heat transfer coefficient and pressure drop of cellulose corrugated media. 19th Australasian Fluid Mechanics Conference, Melbourne, VIC, Australia, 8-11 December 2014. Melbourne, VIC, Australia: RMIT University.
Gurgenci, H. (2014). Supercritical CO2 cycles offer experience curve opportunity to CST in remote area markets. International Conference on Solar Power and Chemical Energy Systems (SolarPACES 2013), Las Vegas, United States, 17-20 20132013. AMSTERDAM: Elsevier Ltd. doi: 10.1016/j.egypro.2014.03.125
Alkhedhair, A., Guan, Z., Gurgenci, H., Jahn, I. and He, S. (2014). Experimental study on inlet air cooling by water spray for natural draft dry cooling towers enhancement. 19th Australasian Fluid Mechanics Conference, Melbourne, VIC, Australia, 8-11 December 2014. Melbourne, VIC, Australia: RMIT University.
Guan, Zhiqiang, Gurgenci, Hal and Zou, Zheng (2014). Design options of solar enhanced natural draft dry cooling tower for solar thermal power plants. International symposium on industrial chimneys and cooling towers, Prague, Czech Republic, 8-11 October 2014. Wuppertal, Germany: Bergische Universität. doi: 10.20898/j.iass.2016.187.763
Guan, Zhiqiang, Gurgenci, Hal, He, Suoying and Lu, Yuanshen (2014). Performance analysis of natural draft dry cooling tower with inlet air precooling. International symposium on industrial chimneys and cooling towers, Prague, Czech Republic, 8-11 October 2014. Wuppertal, Germany: Bergische Universität.
Alkhedhair, A, Gurgenci, H., Jahn, I. and Guan, Z. (2013). Numerical simulation of water injection for pre-cooling inlet air in dry cooling towers. 16th IAHR Cooling Tower and Air-cooled Heat Exchanger Conference (IAHR 16), Minsk, Belarus, 30 September-2 October 2013. Redding, CT, United States: Begell House.
Guan, Z, Gurgenci, H, Hooman, K, He, S and Alkhedhair, A (2013). Wind tunnel studies on inlet air pre-cooling for concentrated solar power (CSP) plants. 16th IAHR Cooling Tower and Air-cooled Heat Exchanger Conference (IAHR 16), Minsk, Belarus, 30 September-2 October 2013. Redding, CT, United States: Begell House.
He, S., Guan, Z. and Gurgenci, H. (2013). Inlet air cooling with wetted media for natural draft dry cooling towers. 16th IAHR Cooling Tower and Air-cooled Heat Exchanger Conference (IAHR 16), Minsk, Belarus, 30 September-2 October 2013. Redding, CT, United States: Begell House.
He, S. Y., Gurgenci, H., Guan, Z. Q. and Lu, Y. A. (2012). Investigation of pre-cooling with Munters media for air-cooled geothermal power plants performance enhancement. 2012 Australian Geothermal Energy Conference, Sydney, Australia, 14 - 16 November 2012. Canberra, Australia: Geoscience Australia.
Lu, Y., Guan, Z. and Gurgenci, H. (2012). CFD simulations on small natural draft dry cooling towers. 18th Australasian Fluid Mechanics Conference, Launceston, Australia, 3-7 December 2012. Hawthorn, Vic., Australia: Australasian Fluid Mechanics Society.
Zou, Zheng, Guan, Zhiqiang and Gurgenci, Hal (2012). Numerical simulation of solar enhanced natural draft dry cooling towers. 18th Australasian Fluid Mechanics Conference (AFMC), Launceston, Australia, 3-7 December 2012. Hawthorn, VIC, Australia: Australasian Fluid Mechanics Society.
Guan, Zhiqiang, Zou, Zheng and Gurgenci, Hal (2012). Hybrid natural draft steel cooling tower for geothermal power plant applications. ISCT 2012 6th International Symposium on Cooling Towers, Cologne, Germany, 20-23 June 2012. University of Wuppertal, Germany: Bergische Universitat Wuppertal.
Guan, Zhiqiang, Pluschke, Armin, Roe, Tony, James, Kevin and Gurgenci, Hal (2011). Dust monitoring for air-cooled heat exchangers in Innamincka geothermal power site. 15th IAHR Cooling Tower and Air-cooled Heat Exchanger Conference & 2011 Annual Symposium of Industrial Cooling Tower Study Committee of CSEE Thermal Power Chapter, Beijing, People's Republic of China, 23-26 October 2011.
Lu, Yuanshen, Guan, Zhiqiang, Gurgenci, Hal and Zou, Zheng (2011). Development of small natural draft dry cooling towers for geothermal power plants. The 15th IAHR Cooling Tower and Air-Cooled Heat Exchanger Conference & 2011 Annual Symposium of Industrial Cooling Tower Study Committee of CSEE Thermal Power Chapter, Beijing, China, 23 - 26 October 2011. Beijing, People's Republic of China: China Institute of Water Resources and Hydropower Research (IWHR).
Zou, Zheng, Gurgenci, Hal, Guan, Zhiqiang and Lu, Yuanshen (2011). Analytical and numerical modelling on solar enhanced natural draft dry cooling tower. 15th IAHR Cooling Tower and Air-Cooled Heat Exchanger Conference and 2011 Annual Symposium of Industrial Cooling Tower Study Committee of CSEE Thermal Power Chapter, Beijing, People's Republic of China, 23-26 October 2011. Beijing, People's Republic of China: China Institute of Water Resources and Hydropower Research (IWHR).
Guan, Zhiqiang and Gurgenci, Hal (2011). Natural draft steel cooling tower for geothermal power plants. 15th IAHR International Conference on Cooling Tower and Heat Exchangers, Beijing, China, 23-26 October 2011. Beijing, China: IWHR.
Guan, Zhiqiang and Gurgenci, Hal (2011). Hybrid cooling research station. International Conference on Cooling Tower and Heat Exchangers (15th, IAHR, 2011), Beijing, China, 23-26 October 2011. Beijing, China: IWHR.
Parulekar, Prashant S. and Gurgenci, Hal (2010). Gas turbine dynamic model and control in integrated gasification combined cycle application. ASME Turbo Expo 2010, Glasgow, Scotland, U.K., 14-18 June 2010. New York, NY, U.S.A.: American Society of Mechanical Engineers (ASME). doi: 10.1115/GT2010-22364
Gurgenci, Hal (2010). Challenges for electrical power generation from EGS. World Geothermal Congress 2010, Bali, Indonesia, 25-29 April 2010. Reykjavik, Iceland: International Geothermal Association.
Gurgenci, Hal and Guan, Zhiqiang (2010). New design concepts for natural draft dry cooling towers. Australian Geothermal Energy Conference 2010, Adelaide, Australia, 16-19 November 2010. Canberra, Australia: Geoscience Australia.
Mostafa Odabaee, Hooman, Kamel and Gurgenci, Halim (2010). Entropy-energy analysis of metal foam heat exchangers as air-cooled heat exchangers. 3rd International Conference on Porous Media and its Applications in Science and Engineering ICPM, Montecatini, Italy, 20-25 June 2010. New York, United States: Engineering Conferences International (ECI).
Odabaee, Mostafa, Hooman, Kamel and Gurgenci, Hal (2009). Comparing the Tube Fin Heat Exchangers to Metal Foam Heat Exchangers for Geothermal Applications. The 2nd Annual Australian Geothermal Energy Conference, Brisbane Australia, 11-13 November 2009.
Guan, Z. and Gurgenci, H. (2009). Dry Cooling Technology in Chinese Coal-fired Power Plants. Australian Geothermal Conference 2009, Brisbane, 10-13 November 2009.
Atrens, Aleks, Gurgenci, Hal and Rudolph, Victor (2009). Energy Analysis of a C02 Thermosiphon. 34th Workshop on Geothermal Reservoir Engineering, Stanford University, CA, USA, February 9-11, 2009. Stanford, California, USA: not found.
Gurgenci, Hal (2009). Electricity generation using a supercritical C02 Geothermal Siphon. 34th Workshop on Geothermal Reservoir Engineering, Stanford University, CA, USA, February 9-11, 2009. Stanford, California, USA: Stanford University.
Gurgenci, H. and Guan, Z. (2009). Dirigible natural draft cooling tower in geothermal and solar power plant applications. 14th IAHR Cooling Tower and Air-Cooled Heat Exchanger Conference, Stellenbosch, South Africa, 1-3 December 2009.
Gurgenci, H., Rudolph, V., Saha, T. and Lu, M. (2008). Challenges for geothermal energy utilisation. 33rd Workshop on Geothermal Reservoir Engineering 2008, Stanford, U.S., 28-30 January, 2008. Stanford, U.S.: Stanford Geothermal Program, Dept. of Petroleum Engineering, Stanford University.
Hooman, K., Gurgenci, Halim and Dincer, Ibrahim (2007). Heatline and 'energy flux vector' visualization of natural convection in a porous cavity occupied by a fluid with temperature-dependent viscosity. Second International Conference on Porous Media and its Applications in Science, Engineering and Industry, Kauai, Hawaii, US, 17-21 June 2007.
Reid, A. W. and Gurgenci, H. (2006). A new longwall horizon control method. 2006 Australian Mining Technology Conference : 'Value through cost control', Cypress Lakes, Hunter Valley, NSW, 26-27 September 2006. Carlton, Victoria: Australian Institute of Mining and Metallurgy.
Kelly, M., Hainsworth, D., Reid, D. J., Caris, C and Gurgenci, H. (2005). State-of-the-Art in Longwall Automation. 2005 Australian Mining Technology Conference "New Technologie", Fremantle, Western Australia, 27-28 September, 2005. Victoria, Australia: The Australasian Institute of Mining and Metallurgy.
Liu, D., Gurgenci, H. and Veidt, M. (2005). Application of coupled vibration on detection of fatigue cracks in welded structures. The Fourth Australasian Congress on Applied Mechanics, Melbourne, Australia, 16-18 February 2005. Melbourne, Australia: Institute of Materials Engineering Australasia.
Reid, A. W. and Gurgenci, H. (2005). Application of shaping filters. Proceedings of the 2005 Australian Mining Technology Conference, Freemantle, Western Australia, 27-28 September 2005. Carlton, Victoria, Australia: The Australasian Institute of Mining and Metallurgy.
Nazari, A., Guan, Z., Daniel, W.J.T. and Gurgenci, H. (2005). Analytical methods for better design and repair of mechanical welded structures. Proceedings of the 2005 Australian Mining Technology Conference, Freemantle, Western Australia, 27-28 September 2005. Carlton, Victoria, Australia: The Australasian Institute of Mining and Metallurgy.
Gurgenci, H., Williams, D. J., Kouzani, A and Groenland, R (2005). Haul Road Dust Suppression. Proceedings of the 2005 Australian Mining Technology Conference, Freemantle, Western Australia, 27-28 September 2005. Carlton, Victoria, Australia: The Australasian Institute of Mining and Metallurgy.
Liu, D., Gurgenci, H. and Veidt, M. (2004). Assessment of structural integrity through coupled vibration. Structural Integrity and Fracture International Conference (SIF'04), Brisbane, Australia, 26-29 September, 2004. Australia: Australian Fracture Group.
Guan, Z. and Gurgenci, H. (2004). Reliability improvement through smart longwalls project. CRCMining Conference, Noosa Head, Queensland, Australia, 15-16 June 2004. Brisbane, Australia: Cooperative Research Centre - Mining (CRCMining).
Gurgenci, Halim (2004). Improving Longwall Face Equipment Reliability. Longwall 2004, Hunter Valley, New South Wales, Australia, 25-27 October 2004. not found: not found.
Reid, A. W. and Gurgenci, H. (2004). Modelling the dynamics of longwall shearers. CRCMining Conference, Noosa Head, Queensland, Australia, 15-16 June 2004. Brisbane, Australia: Cooperative Research Centre - Mining (CRCMining).
Nazari, A., Guan, Z., Daniel, W.J.T. and Gurgenci, H. (2004). Life estimation for structural welded joints based on hot spot stresses. CRCMining Conference, Noosa Head, Queensland, Australia, 15-16 June 2004. Brisbane, Australia: Cooperative Research Centre - Mining (CRCMining).
Liu, D., Gurgenci, H. and Veidt, M. (2004). Detection of fatigue cracks in boom structures using coupled response measurements. CRCMining Conference, Noosa Head, Queensland, Australia, 15-16 June 2004. Kenmore East, Australia: CRCMining.
Liu, D., Gurgenci, H. and Veidt, M. (2003). Crack detection in welded mechanical structures using coupled vibrations. Asia-Pacific Vibration Conference, Gold Coast, Australia, 12-14 November 2003. Brisbane: Queensland University of Technology.
Gurgenci, H., McAree, R., Meehan, P. and Guan, Z. (2002). How to Manage Machine Duty to Sustain High Production Rates. CMMI Congress 2002 - International Codes, Technology and Sustainability for the Minerals Industry, , , May 27, 2002-May 28, 2002.
Gurgenci, H., McAree, P.R., Meehan, P. A. and Guan, Z. (2002). How to manage machine duty to sustain high production rates. CMMI Congress 2002, Cairns, Queensland, Australia, 27-28 May, 2002. Cairns, Queensland, Australia: The Australasian Institute of Mining and Metallurgy.
Guan, Zhiqiang, Gurgenci, Hal and Meehan, Paul (2002). Duty monitoring and duty-based maintenance on mining equipment. 3rd Asia Pacific Conference on Systems Integrity and Maintenae, Hilton Cairns, Australia, 25-27 September, 2002. Brisbane: Queensland University of Technology.
Bongers, D. R. and Gurgenci, H. (2002). Development of a training set for fault detection in Longwall Mining. The 5th Biennial Engineering Mathematics and Applications Conference, The University of Technology, Brisbane, 29 September - 2 October 2002. Brisbane, Australia: The University of Technology.
Reid, A. W., Gurgenci, H. and Meehan, P. A. (2002). External force resolution from a dynamic, coupled mechanical-structural-electrical system: Application in Longwall Mining. The fifth Biennial Engineering Mathematics and Applications Ce, Queensland University of Technology, Brisbane, 29/09/02 - 02/10/02. Brisbane, Australia: Queensland University of Technology.
Kelly, Michael, Hainsworth, David, Lever, Paul and Gurgenci, Hal (2002). Longwall Automation : An Acarp Landmark Project. CMMI Congress 2002, Cairns, 27-28 May, 2002. Carlton South, Vic.: AusIMM.
Liu, D., Gurgenci, H. and Veidt, M. (2001). Crack identification in hollow section structures through coupled response measurements. 19th International Modal Analysis Conference, Kissimmee, Florida, 5-8 Feb 2001. Bethel, Conn: Society for Experimental Mechanics Inc..
Guan, Zhiqiang, Faruquee, Zakir, Horton, Bradley and Gurgenci, Hal (2001). Dragline Field Testing. 19th International Modal Analysis Conference (IMAC), Kissimmee, Florida, 4-8 Feb 2001. Bethel, CT: Society for Experimental Mechanics Inc.
Bongers,Daniel, Gurgenci, Hal, Wilson, Richard and Orlowska, Maria (2001). Event Detection and Identification from Multivariate Data with Missing Values. Second International ICSC Symposium on Advances in Intelligent Data Analysis (AIDA' 2001), University of Wales, Bangor, Wales, 19th - 22 June, 2001.
Gurgenci, H., Guan, Z., Townson, P. and Murthy, D. N. P. (2000). Managing damage on draglines and other mining machines. The Impact of New Technology and Changing Demands on the Mining Industry, Sydney, Australia, 10-12 April, 2000. Victoria, Australia: The Australasian Institute of Mining & Metallurgy.
Horton, C., Gurgenci, H., Veidt, M. and Friswell, M. (2000). Finite element model updating of a welded space frame. 18th International Modal Analysis Conference on Structural Dynamics, San Antonio, Texas, USA, 7-10 February, 2000. Conneticut, USA: Society for Experimental Mechanics Inc..
Gurgenci, H. (2000). Dragline duty meter-maintenance based on severity of duty. International Maintenance Management Conference, Sydney, Australia, 13-14 November, 2000. Victoria, Australia: Engineering Information Transfer Pty Ltd.
Horton, C., Gurgenci, H., Veidt, M. and Friswell, M. I. (1999). Finite element model updating of the welded joints in a tubular H-frame. Modal Analysis: Reducing the Time to Market, Hyatt Orlando Hotel, Kissimmee, FL, 8-11 February 1999. Bethel, CT: Society of Experimental Engineers.
Guan, Z. and Gurgenci, H. (1999). Life prediction for dragline boom with increased bucket loads. Melbourne, 12-13 October 1999. Melbourne: Compumod.
Horton, C., Gurgenci, H., Veidt, M. and Guan, Z. (1999). Damage detection in practical mechanical structures. Euromech 401: Inverse Methods in Structural Dynamics, Dept of Mechanical Engineering, The Univ. of Liverpool, 6-7 September 1999. Liverpool, UK: The Univ. of Liverpool.
Gray, D. and Gurgenci, H. (1999). Modal analysis of skis and snowboards. Recent Advances in Modal Analysis Practice, Gold Coast, Qld, Aust., 15-17 Dec 1999. Brisbane: The Univ. of Qld.
Guan, Z., Horton, C. and Gurgenci, H. (1999). Testing dragline DRE23 in peak downs. Recent Advances in Modal Analysis Practice, Gold Coast, Qld, Aust., 15-17 Dec 1999. Brisbane: The Univ. of Qld.
Horton, C., Gurgenci, H., Veidt, M. and Friswell, M. I. (1999). Finite element model updating of the welded joints in a tubular H-frame. Recent Advances in Modal Analysis Practice, Gold Coast, Queensland Australia, 15th - 17th December, 1999. Brisbane: The Univ. of Qld.
Siegrist, P. M., McAree, P. R. and Gurgenci, H. (1999). The interaction between mining trucks and haul roads. Recent Advances in Modal Analysis Practice, Gold Coast, Qld, Aust., 15-17 Dec 1999. Brisbane: The Univ. of Qld.
Jenkins, D. M., Gurgenci, H. and Morrison, W. R B (1993). Relationship between static and dynamic burst pressures of sheet steel diaphragms. Proceedings of the 1st Conference on Dynamic Loading in Manufacturing and Service, , , February 9, 1993-February 11, 1993. Publ by IE Aust.
Gurgenci, H., Yildirim, T., Kakac, S. and Veziroglu, T. N. (1986). PRESSURE-DROP AND DENSITY-WAVE INSTABILITY THRESHOLDS IN BOILING CHANNELS. Selection de Communications au Symposium AIRH: L'Approche Stochastique des Ecoulements Souterrains., , , ASME.
Ozakcay, L. and Gurgenci, H. (1986). Feasibility of solar pond power generation in outback Queensland - Australia. Ninth Biennial Congress of the International Solar Energy Society., Montreal, Que, Canada, 23-29 June 1985. Pergamon Press. doi: 10.1016/b978-0-08-033177-5.50288-x
Ortabasi, U., Gurgenci, H. and Selcuk, M. K. (1984). STAND-ALONE PARABOLIC DISH POWER PLANTS TO PROVIDE ELECTRICITY TO ISOLATED SINGLE RESIDENCES IN REMOTE AREAS OF AUSTRALIA. Solar World Congress, Proceedings of the 8th Biennial Congress of the International Solar Energy Society., , , Pergamon Press.
Ortabasi, U. and Gurgenci, H. (1983). OVERVIEW OF SOLAR PONDS FOR PROCESS HEAT AND POWER GENERATION. International Symposium-Workshop on Renewable Energy Sources., , , Pakistan Council of Scientific & Industrial Research.
Mentes, A., Gurgenci, H., Yildirim, O. T., Kakac, S. and Veziroglu, T. N. (1982). EFFECT OF HEATER SURFACE CONFIGURATIONS ON TWO-PHASE FLOW INSTABILITIES IN A VERTICAL BOILING CHANNEL. Proceedings of Condensed Papers - 16th Southeastern Seminar on Thermal Sciences., , , Univ of Miami.
Lin, Z. H., Veziroglu, T. N., Kakac, S., Gurgenci, H. and Mentes, A. (1982). HEAT TRANSFER IN OSCILLATING TWO-PHASE FLOWS AND EFFECT OF HEATER SURFACE CONDITIONS. Heat Transfer 1982, Proceedings of the 7th International Heat Transfer Conference. Volume 6: General Papers: Combined Heat and Mass Transfer, Particle Heat Transfer, Heat Exchangers, Industrial Heat Transfer, Heat Transfer in Energy Utilization., , , Hemisphere Publ Corp.
Gurgenci, H., Veziroglu, T. N. and Kakac, S. (1982). PRESSURE-DROP AND DENSITY-WAVE INSTABILITY THRESHOLDS IN BOILING CHANNELS. Proceedings of Condensed Papers - 16th Southeastern Seminar on Thermal Sciences., , , Univ of Miami.
Gurgenci, H., Veziroglu, T. N. and Kakac, S. (1982). SIMPLIFIED NONLINEAR DESCRIPTIONS OF TWO-PHASE FLOW INSTABILITIES IN A VERTICAL BOILING CHANNEL. Proceedings of Condensed Papers - 16th Southeastern Seminar on Thermal Sciences., , , Univ of Miami.