Professor Han Huang
Emeritus Professor
School of Mechanical and Mining Engineering
Affiliate of Centre for Advanced Materials Processing and Manufacturing (AMPAM)
Centre for Advanced Materials Processing and Manufacturing
Book Chapters
Yin, Yu, Atrens, Andrej, Huang, Han and Zhang, Ming-Xing (2022). Cost-effective Fe-rich high-entropy alloys: a brief review. High entropy materials: microstructures and properties. (pp. 1-21) edited by Yong A. Zhang. London, United Kingdom: IntechOpen. doi: 10.5772/intechopen.105081
Lu, Mingyuan and Huang, Han (2015). Interfacial adhesion of film/substrate system characterised by nanoindentation. Thin Films and Coatings: Toughening and Toughness Characterization. (pp. 315-375) edited by Sam Zhang.. Hoboken, NJ United States: CRC Press. doi: 10.1201/b18729
Huang, Han (2013). Micro grinding applications. Micro cutting: fundamentals and applications. (pp. 275-313) edited by Kai Cheng and Dehong Huo. Chichester, West Sussex, United Kingdom: John Wiley & Sons. doi: 10.1002/9781118536605.ch10
Huang, Han, Zhou, Libo and Yin, Ling (2011). Polishing using flexible abrasive tools and loose abrasives. Machining with abrasives. (pp. 345-384) edited by Mark J. Jackson and J. Paulo Davim. New York: Springer. doi: 10.1007/978-1-4419-7302-3
Journal Articles
Yin, Yu, Wang, Hao, Tan, Qiyang, Sun, Qiang, Wu, Yueqin, Xu, Shengduo, Zhao, Yitian, Li, Meng, Liao, Xiaozhou, Huang, Han and Zhang, Mingxing (2025). A new route to bulk nanostructured multiphase alloys with ultrahigh hardness. Journal of Materials Science and Technology, 210, 151-158. doi: 10.1016/j.jmst.2024.05.051
Li, Xuliang, Bonilla, Mauricio Rincón, Lu, Mingyuan and Huang, Han (2024). Atomistic understanding of ductile-to-brittle transition in single crystal Si and GaAs under nanoscratch. International Journal of Mechanical Sciences, 282 109689, 109689. doi: 10.1016/j.ijmecsci.2024.109689
Fan, Zhiqi, Tan, Qiyang, Kang, Chengwei and Huang, Han (2024). Advances and challenges in direct additive manufacturing of dense ceramic oxides. International Journal of Extreme Manufacturing, 6 (5) 052004, 1-36. doi: 10.1088/2631-7990/ad5424
Wu, Yueqin, Rao, Qijian, Qin, Zhiyuan, Tan, Shuiping, Huang, Guoqin, Huang, Hui, Xu, Xipeng and Huang, Han (2024). A distinctive material removal mechanism in the diamond grinding of (0001)-oriented single crystal gallium nitride and its implications in substrate manufacturing of brittle materials. International Journal of Machine Tools and Manufacture, 203 104222, 104222. doi: 10.1016/j.ijmachtools.2024.104222
Zhao, Yitian, Lin, Weikang, Edwards, Grant, Zou, Yanbin, Zhao, Xiujuan, Song, Shuning, Heitzmann, Michael, Martin, Darren, Grøndahl, Lisbeth, Lu, Mingyuan and Huang, Han (2024). Graphene/graphene oxide and melamine as synergistic additives for polyester nanocomposite coatings. Materials Chemistry and Physics, 320 129384. doi: 10.1016/j.matchemphys.2024.129384
Bawazir, M., Lim, C. H., Arnés-Urgellés, P., Lu, M., Huang, H. and Zhang, Y. (2024). Brittle–ductile threshold in lithium disilicate under sharp sliding contact. Journal of Dental Research, 103 (8), 839-847. doi: 10.1177/00220345241256279
Li, Mian, Mu, Dekui, Wu, Yueqin, Huang, Guoqing, Meng, Hui, Xu, Xipeng and Huang, Han (2024). Influence of diamond abrasives on material removal of single crystal SiC in mechanical dicing. Journal of Materials Processing Technology, 327 118390, 118390. doi: 10.1016/j.jmatprotec.2024.118390
Yibibulla, Tursunay, Hou, Lizhen, Mead, James L., Huang, Han, Fatikow, Sergej and Wang, Shiliang (2024). Frictional behavior of one-dimensional materials: an experimental perspective. Nanoscale Advances, 6 (13), 3251-3284. doi: 10.1039/d4na00039k
Lin, Weikang, Zhao, Yitian, Edwards, Grant, Guo, Qiang, Chen, Tianzhen, Song, Shuning, Heitzmann, Michael, Martin, Darren, Grøndahl, Lisbeth, Lu, Mingyuan and Huang, Han (2024). Mechanical properties and scratch recovery of nanoclay/polyester composite coatings for pre-coated metal (PCM) sheets. Composites Part B: Engineering, 273 111217. doi: 10.1016/j.compositesb.2024.111217
Du, Du, Huang, Han and Lu, Mingyuan (2024). The influence of Pt islands on the failure of Pt thin film on a flexible PET substrate. Journal of Physics D: Applied Physics, 57 (22) 225303, 225303. doi: 10.1088/1361-6463/ad2e50
Patel, Rushabh, Gómez-Cerezo, Maria Natividad, Huang, Han, Grøndahl, Lisbeth and Lu, Mingyuan (2024). Degradation behaviour of porous poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) scaffolds in cell culture. International Journal of Biological Macromolecules, 257 (Pt 2) 128644, 128644. doi: 10.1016/j.ijbiomac.2023.128644
Fan, Chunmei, Xiong, Fang, Zhang, Shanshan, Gong, Zhaojian, Liao, Qianjin, Li, Guiyuan, Guo, Can, Xiong, Wei, Huang, He and Zeng, Zhaoyang (2024). Role of adhesion molecules in cancer and targeted therapy. Science China-Life Sciences, 67 (5), 940-957. doi: 10.1007/s11427-023-2417-3
Wang, Yongqiang, Zhang, Shuaiyang, Xia, Hao, Wu, Yueqin and Huang, Han (2023). Unveiling the effect of crystal orientation on gallium nitride cutting through MD simulation. International Journal of Mechanical Sciences, 259 108619, 108619. doi: 10.1016/j.ijmecsci.2023.108619
Yang, Shengyao, Li, Xuliang, Zhao, Yitian, Al-amin, Md, Grøndahl, Lisbeth, Lu, Mingyuan, Cheung, Chi Fai and Huang, Han (2023). MD simulation of chemically enhanced polishing of 6H-SiC in aqueous H2O2. Journal of Manufacturing Processes, 107, 515-528. doi: 10.1016/j.jmapro.2023.10.056
Li, Xuliang, Fan, Zhiqi, Huang, Shuiquan, Lu, Mingyuan and Huang, Han (2023). Brittle-to-ductile transition in nanoscratching of silicon and gallium arsenide using Berkovich and Conical tips. Applied Surface Science, 637 157934, 1-12. doi: 10.1016/j.apsusc.2023.157934
Yin, Yu, Tan, Qiyang, Yang, Nan, Chen, Xingrui, Ren, Wangrui, Liu, Lei, Chen, Houwen, Atrens, Andrej, Ma, Ninshu, Huang, Han and Zhang, Ming-Xing (2023). Cost-effective and facile route to ultrafine-microstructure high-entropy alloy for cryogenic applications. Materials Science and Engineering: A, 881 145408, 145408. doi: 10.1016/j.msea.2023.145408
Gao, Shang, Wang, Haoxiang, Huang, Han and Kang, Renke (2023). Molecular simulation of the plastic deformation and crack formation in single grit grinding of 4H-SiC single crystal. International Journal of Mechanical Sciences, 247 108147. doi: 10.1016/j.ijmecsci.2023.108147
Liu, Zhuo, Cheng, Wei, Mu, Dekui, Lin, Qiaoli, Xu, Xipeng and Huang, Han (2023). Growth mechanisms of interfacial carbides in solid-state reaction between single-crystal diamond and chromium. Journal of Materials Science and Technology, 144, 138-149. doi: 10.1016/j.jmst.2022.10.022
Mead, James L., Wang, Shiliang, Zimmermann, Sören, Fatikow, Sergej and Huang, Han (2023). Resolving the adhesive behavior of 1D materials: a review of experimental approaches. Engineering, 24, 39-72. doi: 10.1016/j.eng.2023.02.012
Huang, Danni, Yao, Xiyu, Zhou, Yinghao, Zhu, Qiang, Tang, Yaxin, Huang, Han, Zhang, Ming-Xing and Yan, Ming (2023). Tailoring microstructure and mechanical properties of β-solidifying TiAl alloy fabricated by laser-engineered net shaping through heat treatment. Additive Manufacturing, 67 103502, 1-12. doi: 10.1016/j.addma.2023.103502
Yin, Yu, Ren, Wangrui, Tan, Qiyang, Chen, Houwen, Huang, Han and Zhang, Ming-Xing (2023). A cost-effective cryogenic high-entropy alloy with high strength-ductility synergy and strain hardenability. Materials Science and Engineering: A, 865 144607, 144607. doi: 10.1016/j.msea.2023.144607
Liu, Zhuo, Cheng, Wei, Mu, Dekui, Wu, Yueqin, Lin, Qiaoli, Xu, Xipeng and Huang, Han (2023). Influences of early-stage C diffusion on growth microstructures in solid-state interface reaction between CVD diamond and sputtered Cr. Materials Characterization, 196 112603, 112603. doi: 10.1016/j.matchar.2022.112603
Lu, Jingzhou, Huang, Han, Li, Yunkai and Mou, Tong (2023). Experimental and Numerical Investigation of Axial Compression Behaviour of FRP-Confined Concrete-Core-Encased Rebar. Polymers, 15 (4) ARTN 828. doi: 10.3390/polym15040828
Huang, Han, Xie, Dong, Zheng, Zeqiang, Ai, Shuzhao, Zeng, Ying, Xie, Shilei, Liu, Peng, Wang, Shoushan, Zhang, You, Zhang, Min and Cheng, Faliang (2023). Enhanced lithium storage of biomass-derived carbon/red phosphorus anode enabled by stable P-O-C bonds. Journal of Electroanalytical Chemistry, 930 ARTN 117148, 117148. doi: 10.1016/j.jelechem.2023.117148
Zhao, Yitian, Lu, Mingyuan, Fan, Zhiqi, Yin, Yu, Lin, Weikang and Huang, Han (2023). Laser surface engineering of Ti–6Al–4V with TiO2/Al2O3 composite powder for improved wear resistance. Smart Materials in Manufacturing, 1 100015, 1-13. doi: 10.1016/j.smmf.2023.100015
Dehkhoda, Sahar, Lu, Mingyuan and Huang, Han (2022). Adhesion evaluation of an embedded SiN/GaAs interface using a novel “push-out” technique. Micromachines, 14 (1) 37, 1-11. doi: 10.3390/mi14010037
Li, Mian, Mu, Dekui, Huang, Shuiquan, Wu, Yueqin, Meng, Hui, Xu, Xipeng and Huang, Han (2022). Ultrathin diamond blades for dicing single crystal SiC developed using a novel bonding method. Journal of Manufacturing Processes, 84, 88-99. doi: 10.1016/j.jmapro.2022.09.058
Axinte, Dragos, Huang, Han, Yan, Jiwang and Liao, Zhirong (2022). What micro-mechanical testing can reveal about machining processes. International Journal of Machine Tools and Manufacture, 183 103964, 1-27. doi: 10.1016/j.ijmachtools.2022.103964
Huang, Danni, Zhou, Yinghao, Yao, Xiyu, Tan, Qiyang, Chang, Haiwei, Wang, Dawei, Lu, Songhe, Liu, Shiyang, Xu, Jingyuan, Jin, Shenbao, Sha, Gang, Huang, Han, Yan, Ming and Zhang, Ming-Xing (2022). From crack-prone to crack-free: unravelling the roles of LaB6 in a β-solidifying TiAl alloy fabricated with laser additive manufacturing. Materials Science and Engineering: A, 861 144358, 1-14. doi: 10.1016/j.msea.2022.144358
Gao, Shang, Li, Honggang, Huang, Han and Kang, Renke (2022). Grinding and lapping induced surface integrity of silicon wafers and its effect on chemical mechanical polishing. Applied Surface Science, 599 153982, 1-12. doi: 10.1016/j.apsusc.2022.153982
Lin, Chih-Ling, Lin, Weikang, Huang, Shuiquan, Edwards, Grant, Lu, Mingyuan and Huang, Han (2022). Tribological performance of zeolite/sodium dodecylbenzenesulfonate hybrid water-based lubricants. Applied Surface Science, 598 153764, 153764. doi: 10.1016/j.apsusc.2022.153764
Wu, Yueqin, Rao, Qijian, Best, James P., Mu, Dekui, Xu, Xipeng and Huang, Han (2022). Superior Room Temperature Compressive Plasticity of Submicron Beta-Phase Gallium Oxide Single Crystals. Advanced Functional Materials, 32 (48) 2207960, 1-8. doi: 10.1002/adfm.202207960
Cheng, Wei, Liu, Zhuo, Lin, Qiaoli, Huang, Guoqin, Xu, Xipeng, Huang, Han and Mu, Dekui (2022). Towards tailorable interface microstructure through solid-state interface reaction between synthetic diamond grits and sputtered Ni-Cr binary alloy. Applied Surface Science, 596 153531, 1-13. doi: 10.1016/j.apsusc.2022.153531
Ma, Liang, Jiang, Yijun, Dai, Guozhang, Mead, James L., Yibibulla, Tursunay, Lu, Mingyuan, Huang, Han, Fatikow, Sergej and Wang, Shiliang (2022). Size- and temperature-dependent Young's modulus of individual ZnS nanobelts. Journal of Physics D: Applied Physics, 55 (36) 364001, 1-8. doi: 10.1088/1361-6463/ac78a0
Tan, Shuiping, Wang, Yunpeng, Huang, Hui, Wu, Yueqin and Huang, Han (2022). Deformation and removal mechanism of single crystal gallium nitride in nanoscratching. Ceramics International, 48 (16), 23793-23799. doi: 10.1016/j.ceramint.2022.05.033
Wu, Hui, Wei, Dongbin, Hee, Ay Ching, Huang, Shuiquan, Xing, Zhao, Jiao, Sihai, Huang, Han and Jiang, Zhengyi (2022). The influence of water-based nanolubrication on mill load and friction during hot rolling of 304 stainless steel. International Journal of Advanced Manufacturing Technology, 121 (11-12), 7779-7792. doi: 10.1007/s00170-022-09868-9
Yibibulla, Tursunay, Mead, James L., Ma, Liang, Hou, Lizhen, Huang, Han and Wang, Shiliang (2022). The shearing behavior of nanowire contact pairs in air and the role of humidity. Physica Status Solidi - Rapid Research Letters, 16 (8) 2200130, 1-8. doi: 10.1002/pssr.202200130
Lawn, Brian R., Huang, Han, Lu, Mingyuan, Borrero-López, Óscar and Zhang, Yu (2022). Threshold damage mechanisms in brittle solids and their impact on advanced technologies. Acta Materialia, 232 117921, 117921. doi: 10.1016/j.actamat.2022.117921
Cooper, Oren, Phan, Hoang-Phuong, Fitzpatrick, Tom, Dinh, Toan, Huang, Han, Nguyen, Nam-Trung and Tiralongo, Joe (2022). Picomolar detection of carbohydrate-lectin interactions on piezoelectrically printed microcantilever array. Biosensors and Bioelectronics, 205 114088, 114088. doi: 10.1016/j.bios.2022.114088
Hou, Lizhen, Gao, Yangyang, Yibibulla, Tursunay, Huang, Han and Wang, Shiliang (2022). Young's modulus and thermal stability of individual Sb2O3 nanowires at elevated temperatures. Physica Status Solidi - Rapid Research Letters, 16 (6) 2200039. doi: 10.1002/pssr.202200039
Huang, Shuiquan, Gao, Shang, Huang, Chuanzhen and Huang, Han (2022). 脆性材料磨粒加工的纳米尺度去除机理. Jingangshi yu Moliao Moju Gongcheng/Diamond and Abrasives Engineering, 42 (3), 257-267. doi: 10.13394/j.cnki.jgszz.2021.3009
Hou, Lizhen, Hou, Maofen, Yibibulla, Tursunay, Mead, James Lee, Fatikow, Sergej, Wang, Shiliang and Huang, Han (2022). Frictional shear stress of ZnO nanowires on natural and pyrolytic graphite substrates. Friction, 10 (12), 2059-2068. doi: 10.1007/s40544-021-0577-2
Zhao, Mengyao, Wang, Yian, Tan, Fenghua, Liu, Lingyun, Hou, Xiangchan, Fan, Chunmei, Tang, Le, Mo, Yongzhen, Wang, Yumin, Yan, Qijia, Gong, Zhaojian, Li, Zheng, Liao, Qianjin, Guo, Can, Huang, He, Zeng, Xi, Li, Guiyuan, Zeng, Zhaoyang, Xiong, Wei and Wang, Fuyan (2022). Circular RNA circCCNB1 inhibits the migration and invasion of nasopharyngeal carcinoma through binding and stabilizing TJP1 mRNA. Science China-Life Sciences, 65 (11), 2233-2247. doi: 10.1007/s11427-021-2089-8
Lin, Weikang, Zhao, Yitian, Wang, Feng, Huang, Han and Lu, Mingyuan (2022). Interfacial adhesion assessment of SiN/GaAs film/substrate system using microcantilever bending technique. Journal of Physics D: Applied Physics, 55 (24) 245104, 1-9. doi: 10.1088/1361-6463/ac5da4
Fan, Zhiqi, Yin, Yu, Tan, Qiyang, Li, Xuliang, Niu, Pengda, Li, Ruidi, Yuan, Tiechui, Zhang, Ming-Xing and Huang, Han (2022). Unveiling solidification mode transition and crystallographic characteristics in laser 3D-printed Al2O3-ZrO2 eutectic ceramics. Scripta Materialia, 210 114433, 114433. doi: 10.1016/j.scriptamat.2021.114433
Yin, Yu, Zhao, Yitian, Koey, Kai En, Tan, Qiyang, Zhang, Ming-Xing and Huang, Han (2022). In-situ synthesized age-hardenable high-entropy composites with superior wear resistance. Composites Part B: Engineering, 235 109795, 109795. doi: 10.1016/j.compositesb.2022.109795
Ma, Liang, Yibibulla, Tursunay, Jiang, Yijun, Mead, James L., Lu, Mingyuan, Wang, Shiliang and Huang, Han (2022). Temperature and size dependent mechanical properties of vapor synthesized zinc tungstate nanowires. Physica E: Low-Dimensional Systems and Nanostructures, 136 114990, 114990. doi: 10.1016/j.physe.2021.114990
Huang, Shuiquan, Li, Xuliang, Mu, Dekui, Cui, Changcai, Huang, Hui and Huang, Han (2021). Polishing performance and mechanism of a water-based nanosuspension using diamond particles and GO nanosheets as additives. Tribology International, 164 107241, 107241. doi: 10.1016/j.triboint.2021.107241
Zhao, Yitian, Lu, Mingyuan, Yin, Yu, Lin, Weikang and Huang, Han (2021). Laser gas alloying of Ti-6Al-4V in air for tribological applications. Applied Surface Science, 570 151125. doi: 10.1016/j.apsusc.2021.151125
Huang, Shuiquan, Wu, Hui, Jiang, Zhengyi and Huang, Han (2021). Water-based nanosuspensions: Formulation, tribological property, lubrication mechanism, and applications. Journal of Manufacturing Processes, 71, 625-644. doi: 10.1016/j.jmapro.2021.10.002
Huang, Danni, Tan, Qiyang, Zhou, Yinghao, Yin, Yu, Wang, Feng, Wu, Tao, Yang, Xianliang, Fan, Zhiqi, Liu, Yingang, Zhang, Jingqi, Huang, Han, Yan, Ming and Zhang, Ming-Xing (2021). The significant impact of grain refiner on γ-TiAl intermetallic fabricated by laser-based additive manufacturing. Additive Manufacturing, 46 102172, 102172. doi: 10.1016/j.addma.2021.102172
Huang, Shuiquan, Lin, Weikang, Li, Xuliang, Fan, Zhiqi, Wu, Hui, Jiang, Zhengyi and Huang, Han (2021). Roughness-dependent tribological characteristics of water-based GO suspensions with ZrO2 and TiO2 nanoparticles as additives. Tribology International, 161 107073, 107073. doi: 10.1016/j.triboint.2021.107073
Wang, Yongqiang, Li, Xuliang, Wu, Yueqin, Mu, Dekui and Huang, Han (2021). The removal mechanism and force modelling of gallium oxide single crystal in single grit grinding and nanoscratching. International Journal of Mechanical Sciences, 204 106562, 106562. doi: 10.1016/j.ijmecsci.2021.106562
Patel, Rushabh, Monticone, Davide, Lu, Mingyuan, Grøndahl, Lisbeth and Huang, Han (2021). Corrigendum to Hydrolytic degradation of porous poly(hydroxybutyrate-co-hydroxyvalerate) scaffolds manufactured using selective laser sintering Polymer Degradation and Stability 187 (2021) (Polymer Degradation and Stability (2021) 187, (S0141391021000653), (10.1016/j.polymdegradstab.2021.109545)). Polymer Degradation and Stability, 190 109649, 1-2. doi: 10.1016/j.polymdegradstab.2021.109649
Wang, Shiliang, Ma, Liang, Mead, James Lee, Ju, Shin-Pon, Li, Guodong and Huang, Han (2021). Catalyst-free synthesis and mechanical characterization of TaC nanowires. Science China: Physics, Mechanics and Astronomy, 64 (5) 254612. doi: 10.1007/s11433-020-1672-7
Patel, Rushabh, Monticone, Davide, Lu, Mingyuan, Grøndahl, Lisbeth and Huang, Han (2021). Hydrolytic degradation of porous poly(hydroxybutyrate-co-hydroxyvalerate) scaffolds manufactured using selective laser sintering. Polymer Degradation and Stability, 187 109545, 1-10. doi: 10.1016/j.polymdegradstab.2021.109545
Yin, Yu, Tan, Qiyang, Zhao, Yitian, Sun, Qiang, Shi, Zhiming, Bermingham, Michael, Zhuang, Wyman, Huang, Han and Zhang, Ming-Xing (2021). A cost-effective Fe-rich compositionally complicated alloy with superior high-temperature oxidation resistance. Corrosion Science, 180 109190, 109190. doi: 10.1016/j.corsci.2020.109190
Zhao, Yitian, Fan, Zhiqi, Tan, Qiyang, Yin, Yu, Lu, Mingyuan and Huang, Han (2021). Interfacial and tribological properties of laser deposited TiOxNy/Ti composite coating on Ti alloy. Tribology International, 155 106758, 1-9. doi: 10.1016/j.triboint.2020.106758
Huang, Shuiquan, Li, Xuliang, Zhao, Yitian, Sun, Qiang and Huang, Han (2021). A novel lapping process for single-crystal sapphire using hybrid nanoparticle suspensions. International Journal of Mechanical Sciences, 191 106099, 106099. doi: 10.1016/j.ijmecsci.2020.106099
Zhou, Qi, Huang, Han, Fan, Qingrong and Wu, Chaoqun (2021). Estimation of the instantaneous rotational frequency of gear transmission with large speed variations using short-time angular resampling and ridge-enhancing techniques. Measurement, 172 108844. doi: 10.1016/j.measurement.2020.108844
Huang, Han, Li, Xuliang, Mu, Dekui and Lawn, Brian R. (2021). Science and art of ductile grinding of brittle solids. International Journal of Machine Tools and Manufacture, 161 103675, 103675. doi: 10.1016/j.ijmachtools.2020.103675
Yibibulla, Tursunay, Jiang, Yijun, Wang, Shiliang and Huang, Han (2021). Size- and temperature-dependent Young's modulus of SiC nanowires determined by a laser-Doppler vibration measurement. Applied Physics Letters, 118 (4) 043103, 043103. doi: 10.1063/5.0040552
Yu, Bowen, Hou, Lizhen, Wang, Shiliang and Huang, Han (2021). The adhesion of a mica nanolayer on a single-layer graphene supported by SiO2 substrate characterised in air. Nanotechnology, 32 (4) 045701, 1-8. doi: 10.1088/1361-6528/abbf25
Jiang, Yijun, Lu, Mingyuan, Wang, Shiliang and Huang, Han (2021). Temperature coefficient of Young’s modulus of silver microwhiskers determined by a laser Doppler vibration measurement. Modern Physics Letters B, 35 (21) 2150350, 1-11. doi: 10.1142/s0217984921503504
Lawn, Brian R., Borrero‐Lopez, Oscar, Huang, Han and Zhang, Yu (2021). Micromechanics of machining and wear in hard and brittle materials. Journal of the American Ceramic Society, 104 (1) jace.17502, 5-22. doi: 10.1111/jace.17502
Tan, Qiyang, Fan, Zhiqi, Tang, Xiaoqin, Yin, Yu, Li, Gan, Huang, Danni, Zhang, Jingqi, Liu, Yingang, Wang, Feng, Wu, Tao, Yang, Xianliang, Huang, Han, Zhu, Qiang and Zhang, Ming-Xing (2021). A novel strategy to additively manufacture 7075 aluminium alloy with selective laser melting. SSRN Electronic Journal, 821 141638, 141638. doi: 10.2139/ssrn.3774509
Kuang, Daitao, Wang, Shiliang, Hou, Lizhen, Luo, Heng, Deng, Lianwen, Chen, Chuansheng, Song, Min, Mead, James L. and Huang, Han (2020). A comparative study on the dielectric response and microwave absorption performance of FeNi-capped carbon nanotubes and FeNi-cored carbon nanoparticles. Nanotechnology, 32 (10) 105701, 1-12. doi: 10.1088/1361-6528/abc644
Zhao, Yitian, Lu, Mingyuan, Fan, Zhiqi, Huang, Shuiquan and Huang, Han (2020). Laser deposition of wear-resistant titanium oxynitride/titanium composite coatings on Ti-6Al-4V alloy. Applied Surface Science, 531 147212. doi: 10.1016/j.apsusc.2020.147212
Wu, Hui, Kamali, Hamidreza, Huo, Mingshuai, Lin, Fei, Huang, Shuiquan, Huang, Han, Jiao, Sihai, Xing, Zhao and Jiang, Zhengyi (2020). Eco-friendly water-based nanolubricants for industrial-scale hot steel rolling. Lubricants, 8 (11) 96, 1-16. doi: 10.3390/lubricants8110096
Yu, Bowen, Wang, Fei, Wang, Shiliang, Hu, Yujin and Huang, Han (2020). The adhesion of mica nanolayers on a silicon substrate in air. Advanced Materials Interfaces, 7 (18) 2000541, 2000541. doi: 10.1002/admi.202000541
Liu, Zhuo, Liao, Xinjiang, Fu, Wei, Mu, Dekui, Xu, Xipeng and Huang, Han (2020). Microstructures and bonding strength of synthetic diamond brazed by near-eutectic Ag–Cu–in–Ti filler alloy. Materials Science and Engineering A, 790 139711, 139711. doi: 10.1016/j.msea.2020.139711
Huang, Han, Lawn, Brian R., Cook, Robert F. and Marshall, David B. (2020). Critique of materials-based models of ductile machining in brittle solids. Journal of the American Ceramic Society, 103 (11) jace.17344, 6096-6100. doi: 10.1111/jace.17344
Kuang, Daitao, Wang, Shiliang, Hou, Lizhen, Luo, Heng, Deng, Lianwen, Song, Min, He, Jun and Huang, Han (2020). Facile synthesis and influences of Fe/Ni ratio on the microwave absorption performance of ultra-small FeNi-C core-shell nanoparticles. Materials Research Bulletin, 126 110837, 110837. doi: 10.1016/j.materresbull.2020.110837
Du, Du, Wu, Yueqin, Zhao, Yitian, Lu, Mingyuan and Huang, Han (2020). Deformation and fracture behaviours of a YAG single crystal characterized using nanoindentation method. Materials Characterization, 164 110302, 110302. doi: 10.1016/j.matchar.2020.110302
Wu, Hui, Jia, Fanghui, Li, Zhou, Lin, Fei, Huo, Mingshuai, Huang, Shuiquan, Sayyar, Sepidar, Jiao, Sihai, Huang, Han and Jiang, Zhengyi (2020). Novel water-based nanolubricant with superior tribological performance in hot steel rolling. International Journal of Extreme Manufacturing, 2 (2) 025002, 025002. doi: 10.1088/2631-7990/ab82fe
Li, Chen, Wu, Yueqin, Li, Xuliang, Ma, Lianjie, Zhang, Feihu and Huang, Han (2020). Deformation characteristics and surface generation modelling of crack-free grinding of GGG single crystals. Journal of Materials Processing Technology, 279 116577, 116577. doi: 10.1016/j.jmatprotec.2019.116577
Zhang, Yubin, Liao, Xinjiang, Lin, Qiaoli, Mu, Dekui, Lu, Jing, Huang, Hui and Huang, Han (2020). Reactive infiltration and microstructural characteristics of Sn-V active solder alloys on porous graphite. Materials, 13 (7) 1532, 1532. doi: 10.3390/ma13071532
Mead, James L., Wang, Shiliang, Zimmermann, Sören and Huang, Han (2020). Interfacial adhesion of ZnO nanowires on a Si substrate in air. Nanoscale, 12 (15), 8237-8247. doi: 10.1039/d0nr01261k
Xiao, Ling, Lu, Mingyuan and Huang, Han (2020). Detection of powder bed defects in selective laser sintering using convolutional neural network. International Journal of Advanced Manufacturing Technology, 107 (5-6), 2485-2496. doi: 10.1007/s00170-020-05205-0
Wu, Yueqin, Mu, Dekui and Huang, Han (2020). Deformation and removal of semiconductor and laser single crystals at extremely small scales. International Journal of Extreme Manufacturing, 2 (1) 012006, 1-25. doi: 10.1088/2631-7990/ab7a2a
Huang, Shuiquan, Li, Xuliang, Yu, Bowen, Jiang, Zhengyi and Huang, Han (2020). Machining characteristics and mechanism of GO/SiO2 nanoslurries in fixed abrasive lapping. Journal of Materials Processing Technology, 277 116444, 116444. doi: 10.1016/j.jmatprotec.2019.116444
Fan, Zhiqi, Zhao, Yitian, Tan, Qiyang, Yu, Bowen, Zhang, Ming-Xing and Huang, Han (2020). New insights into the growth mechanism of 3D-printed Al2O3–Y3Al5O12 binary eutectic composites. Scripta Materialia, 178, 274-280. doi: 10.1016/j.scriptamat.2019.11.040
Tan, Qiyang, Zhang, Jingqi, Mo, Ning, Fan, Zhiqi, Yin, Yu, Bermingham, Michael, Liu, Yingang, Huang, Han and Zhang, Ming-Xing (2020). A novel method to 3D-print fine-grained AlSi10Mg alloy with isotropic properties via inoculation with LaB6 nanoparticles. Additive Manufacturing, 32 101034. doi: 10.1016/j.addma.2019.101034
Zhao, Yitian, Lu, Mingyuan, Fan, Zhiqi, McCormick, Paul, Tan, Qiyang, Mo, Ning and Huang, Han (2020). Microstructures and mechanical properties of wear-resistant titanium oxide coatings deposited on Ti-6Al-4V alloy using laser cladding. Journal of the European Ceramic Society, 40 (3), 798-810. doi: 10.1016/j.jeurceramsoc.2019.10.037
Liao, Xinjiang, He, Qiqi, Lin, Qiaoli, Mu, Dekui, Huang, Hui and Huang, Han (2020). Reactive wetting of Sn-V solder alloys on polycrystalline CVD diamond. Applied Surface Science, 504 144508, 144508. doi: 10.1016/j.apsusc.2019.144508
Liao, Xinjiang, Mu, Dekui, Fu, Wei, Huang, Hui and Huang, Han (2019). Low-temperature wetting mechanisms of polycrystalline chemical vapour deposition (CVD) diamond by Sn-Ti solder alloys. Materials and Design, 182 108039, 108039. doi: 10.1016/j.matdes.2019.108039
Li, Xuliang, Huang, Shuiquan, Wu, Yueqin and Huang, Han (2019). Performance evaluation of graphene oxide nanosheet water coolants in the grinding of semiconductor substrates. Precision Engineering, 60, 291-298. doi: 10.1016/j.precisioneng.2019.08.016
Kuang, Daitao, Hou, Lizhen, Wang, Shiliang, Luo, Heng, Deng, Lianwen, Mead, James L., Huang, Han and Song, Min (2019). Large-scale synthesis and outstanding microwave absorption properties of carbon nanotubes coated by extremely small FeCo-C core-shell nanoparticles. Carbon, 153, 52-61. doi: 10.1016/j.carbon.2019.06.105
Patel, Rushabh, Lu, Mingyuan, Diermann, Sven Heinrich, Wu, Andy, Pettit, Allison and Huang, Han (2019). Deformation behavior of porous PHBV scaffold in compression: A finite element analysis study. Journal of the Mechanical Behavior of Biomedical Materials, 96, 1-8. doi: 10.1016/j.jmbbm.2019.04.030
Ma, Shujun and Huang, Han (2019). The virtually added mass effect of air on a pre-stressed micro-diaphragm sensor. Vacuum, 166, 57-63. doi: 10.1016/j.vacuum.2019.04.053
Hou, Lizhen, Zheng, Lulu, Wang, Shiliang and Huang, Han (2019). Young's modulus of Sb2O3 micro- and nanowires determined accurately by a nanomanipulation-assisted thermal resonance method. AIP Advances, 9 (8) 085101, 085101. doi: 10.1063/1.5109161
Li, Chen, Li, Xuliang, Wu, Yueqin, Zhang, Feihu and Huang, Han (2019). Deformation mechanism and force modelling of the grinding of YAG single crystals. International Journal of Machine Tools and Manufacture, 143, 23-37. doi: 10.1016/j.ijmachtools.2019.05.003
Mu, Dekui, Feng, Kuiyuan, Lin, Qiaoli and Huang, Han (2019). Low-temperature wetting of sapphire using Sn–Ti active solder alloys. Ceramics International, 45 (17), 22175-22182. doi: 10.1016/j.ceramint.2019.07.239
Wu, Hui, Jiang, Chengyang, Zhang, Jianqiang, Huang, Shuiquan, Wang, Lianzhou, Jiao, Sihai, Huang, Han and Jiang, Zhengyi (2019). Oxidation Behaviour of Steel During hot Rolling by Using TiO2-Containing Water-Based Nanolubricant. Oxidation of Metals, 92 (3-4), 315-335. doi: 10.1007/s11085-019-09924-y
Huang, Shuiquan, He, Anshun, Yun, Jung-Ho, Xu, Xuefeng, Jiang, Zhengyi, Jiao, Sihai and Huang, Han (2019). Synergistic tribological performance of a water based lubricant using graphene oxide and alumina hybrid nanoparticles as additives. Tribology International, 135, 170-180. doi: 10.1016/j.triboint.2019.02.031
Lu, Shifeier, Du, Zhibin, Lin, Chih-Ling, Zuo, Qiliang, Huang, Han and Xiao, Yin (2019). Effect of ovariectomy on tissue-level changes in rat maxilla. International Journal of Oral and Maxillofacial Implants, 34 (4), 865-872. doi: 10.11607/jomi.6814
Fan, Zhiqi, Zhao, Yitian, Tan, Qiyang, Mo, Ning, Zhang, Ming-Xing, Lu, Mingyuan and Huang, Han (2019). Nanostructured Al2O3-YAG-ZrO2 ternary eutectic components prepared by laser engineered net shaping. Acta Materialia, 170, 24-37. doi: 10.1016/j.actamat.2019.03.020
Roy, Aditi, Ju, Shin-Pon, Wang, Shiliang and Huang, Han (2019). Temperature dependent Young's modulus of ZnO nanowires. Nanotechnology, 30 (6) 065705, 065705. doi: 10.1088/1361-6528/aaf182
Zimmermann, Sören, Klauser, Waldemar, Mead, James, Wang, Shiliang, Huang, Han and Fatikow, Sergej (2019). A laterally sensitive colloidal probe for accurately measuring nanoscale adhesion of textured surfaces. Nano Research, 12 (2), 389-396. doi: 10.1007/s12274-018-2228-0
Chen, Jinchang, Liao, Xinjiang, Lin, Qiaoli, Mu, Dekui, Huang, Hui, Xu, Xipeng and Huang, Han (2019). Reactive wetting of binary Sn–Cr alloy on polycrystalline chemical vapour deposited diamond at relatively low temperatures. Diamond and Related Materials, 92, 92-99. doi: 10.1016/j.diamond.2018.12.022
Hou, Lizhen, Lee Mead, James, Wang, Shiliang and Huang, Han (2019). The kinetic frictional shear stress of ZnO nanowires on graphite and mica substrates. Applied Surface Science, 465, 584-590. doi: 10.1016/j.apsusc.2018.09.143
Fan, Zhiqi, Zhao, Yitian, Lu, Mingyuan and Huang, Han (2019). Yttria stabilized zirconia (YSZ) thin wall structures fabricated using laser engineered net shaping (LENS). International Journal of Advanced Manufacturing Technology, 105 (11), 4491-4498. doi: 10.1007/s00170-019-03322-z
Mead, James L., Lu, Mingyuan and Huang, Han (2019). Microscale interfacial adhesion assessment in a multilayer by a miniaturised four-point bending test. Mechanics of Materials, 129, 341-351. doi: 10.1016/j.mechmat.2018.12.003
Diermann, Sven H., Lu, Mingyuan, Dargusch, Matthew, Grøndahl, Lisbeth and Huang, Han (2019). Akermanite reinforced PHBV scaffolds manufactured using selective laser sintering. Journal of Biomedical Materials Research - Part B Applied Biomaterials, 107 (8) jbm.b.34349, 2596-2610. doi: 10.1002/jbm.b.34349
Diermann, Sven H., Lu, Mingyuan, Edwards, Grant, Dargusch, Matthew and Huang, Han (2019). In vitro degradation of a unique porous PHBV scaffold manufactured using selective laser sintering. Journal of Biomedical Materials Research - Part A, 107 (1), 154-162. doi: 10.1002/jbm.a.36543
Yu, Bowen, Hou, Lizhen, Wang, Shiliang and Huang, Han (2018). Environment‐dependent adhesion energy of mica nanolayers determined by a nanomanipulation‐based bridging method. Advanced Materials Interfaces, 6 (2) 1801552, 1801552. doi: 10.1002/admi.201801552
Tan, Qiyang, Mo, Ning, Lin, Chih-Ling, Zhao, Yitian, Yin, Yu, Jiang, Bin, Pan, Fusheng, Atrens, Andrej, Huang, Han and Zhang, Ming-Xing (2018). Generalisation of the oxide reinforcement model for the high oxidation resistance of some Mg alloys micro-alloyed with Be. Corrosion Science, 147, 357-371. doi: 10.1016/j.corsci.2018.12.001
Lu, Mingyuan, McCormick, Paul, Zhao, Yitian, Fan, Zhiqi and Huang, Han (2018). Laser deposition of compositionally graded titanium oxide on Ti6Al4V alloy. Ceramics International, 44 (17), 20851-20861. doi: 10.1016/j.ceramint.2018.08.090
Kuang, Daitao, Hou, Lizhen, Wang, Shiliang, Yu, Bowen, Deng Lianwen,, Lin, Liangwu, Huang, Han, He, Jun and Song, Min (2018). Enhanced electromagnetic wave absorption of Ni-C core-shell nanoparticles by HCP-Ni phase. Materials Research Express, 5 (9) 095013, 095013. doi: 10.1088/2053-1591/aad661
Diermann, Sven H., Lu, Mingyuan, Zhao, Yitian, Vandi, Luigi-Jules, Dargusch, Matthew and Huang, Han (2018). Synthesis, microstructure, and mechanical behaviour of a unique porous PHBV scaffold manufactured using selective laser sintering. Journal of the Mechanical Behavior of Biomedical Materials, 84, 151-160. doi: 10.1016/j.jmbbm.2018.05.007
Wu, Hui, Zhao, Jingwei, Luo, Liang, Huang, Shuiquan, Wang, Lianzhou, Zhang, Suoquan, Jiao, Sihai, Huang, Han and Jiang, Zhengyi (2018). Performance evaluation and lubrication mechanism of water-based nanolubricants containing nano-TiO2 in hot steel rolling. Lubricants, 6 (3) 57, 57. doi: 10.3390/lubricants6030057
Shao, Wen, Li, Xingsheng, Sun, Yong, Huang, Han and Tang, Jinyuan (2018). An experimental study of temperature at the tip of point-attack pick during rock cutting process. International Journal of Rock Mechanics and Mining Sciences, 107, 39-47. doi: 10.1016/j.ijrmms.2018.04.044
Shang, Zhentao, Xu, Cheng, Xie, Guizhi, Yi, Jun and Huang, Han (2018). High speed grinding characteristics and machinability of WC-10Co-4Cr coatings deposited via high velocity oxygen fuel spraying. Journal of Mechanical Science and Technology, 32 (7), 3283-3290. doi: 10.1007/s12206-018-0630-x
Gao, Shang, Wu, Yueqin, Kang, Renke and Huang, Han (2018). Nanogrinding induced surface and deformation mechanism of single crystal beta-Ga2O3. Materials Science in Semiconductor Processing, 79, 165-170. doi: 10.1016/j.mssp.2017.12.017
Wu, Hui, Jia, Fanghui, Zhao, Jingwei, Huang, Shuiquan, Wang, Lianzhou, Jiao, Sihai, Huang, Han and Jiang, Zhengyi (2018). Effect of water-based nanolubricant containing nano-TiO2 on friction and wear behaviour of chrome steel at ambient and elevated temperatures. Wear, 426-427 (A), 792-804. doi: 10.1016/j.wear.2018.11.023
Xie, Hongtao, Mead, James L., Wang, Shiliang, Fatikow, Sergej and Huang, Han (2018). Characterizing the surface forces between two individual nanowires using optical microscopy based nanomanipulation. Nanotechnology, 29 (22) 225705, 225705. doi: 10.1088/1361-6528/aab3a5
Chen, Jinchang, Mu, Dekui, Liao, Xinjiang, Huang, Guoqin, Huang, Hui, Xu, Xipeng and Huang, Han (2018). Interfacial microstructure and mechanical properties of synthetic diamond brazed by Ni-Cr-P filler alloy. International Journal of Refractory Metals and Hard Materials, 74, 52-60. doi: 10.1016/j.ijrmhm.2018.03.005
He, Anshun, Huang, Shuiquan, Yun, Jung-Ho, Jiang, Zhengyi, Stokes, Jason R., Jiao, Sihai, Wang, Lianzhou and Huang, Han (2018). Tribological characteristics of aqueous graphene oxide, graphitic carbon nitride, and their mixed suspensions. Tribology Letters, 66 (1) 42. doi: 10.1007/s11249-018-0992-3
Tan, Qiyang, Mo, Ning, Lin, Chih-Ling, Jiang, Bin, Pan, Fusheng, Huang, Han, Atrens, Andrej and Zhang, Ming-Xing (2018). Improved oxidation resistance of Mg-9Al-1Zn alloy microalloyed with 60 wt ppm Be attributed to the formation of a more protective (Mg,Be)O surface oxide. Corrosion Science, 132, 272-283. doi: 10.1016/j.corsci.2018.01.006
Fan, Zhiqi, Lu, Mingyuan and Huang, Han (2018). Selective laser melting of alumina: a single track study. Ceramics International, 44 (8), 9484-9493. doi: 10.1016/j.ceramint.2018.02.166
Wang, Shiliang, Liang, Bingbing, Kuang, Daitao, Hou, Lizhen, Yu, Bowen, Lin, Liang Wu, Deng, Lianwen, Huang, Han and Jun, He (2018). Facile synthesis and excellent microwave absorption properties of FeCo-C core-shell nanoparticles. Nanotechnology, 29 (8) 085604, 1-11. doi: 10.1088/1361-6528/aaa52f
Mead, J. L., Xie, H., Wang, S. and Huang, H. (2018). Enhanced adhesion of ZnO nanowires during in situ scanning electron microscope peeling. Nanoscale, 10 (7), 3410-3420. doi: 10.1039/c7nr09423j
Wu, Hui, Zhao, Jingwei, Cheng, Xiawei, Xia, Wenzhen, He, Anshun, Yun, Jung-Ho, Huang, Shuiquan, Wang, Lianzhou, Huang, Han, Jiao, Sihai and Jiang, Zhengyi (2018). Friction and wear characteristics of TiO2 nano-additive water-based lubricant on ferritic stainless steel. Tribology International, 117, 24-38. doi: 10.1016/j.triboint.2017.08.011
Wu, Y. Q., Gao, S., Kang, R. K. and Huang, H. (2018). Deformation patterns and fracture stress of beta-phase gallium oxide single crystal obtained using compression of micro-pillars. Journal of Materials Science, 54 (3), 1958-1966. doi: 10.1007/s10853-018-2978-9
Xie, Hongtao, Wang, Shiliang and Huang, Han (2017). Effects of Surface Roughness on the Kinetic Friction of SiC Nanowires on SiN Substrates. Tribology Letters, 66 (15) 15, 1-9. doi: 10.1007/s11249-017-0956-z
He, Anshun, Huang, Shuiquan, Yun, Jung-Ho, Jiang, Zhengyi, Stokes, Jason, Jiao, Sihai, Wang, Lianzhou and Huang, Han (2017). The pH-dependent structural and tribological behaviour of aqueous graphene oxide suspensions. Tribology International, 116, 460-469. doi: 10.1016/j.triboint.2017.08.008
Wei, Jonathan C J, Edwards, Grant A, Martin, Darren J, Huang, Han, Crichton, Michael L and Kendall, Mark A F (2017). Allometric scaling of skin thickness, elasticity, viscoelasticity to mass for micro-medical device translation: from mice, rats, rabbits, pigs to humans. Scientific reports, 7 (1) 15885, 1-16. doi: 10.1038/s41598-017-15830-7
Wu, Y. Q., Gao, S. and Huang, H. (2017). The deformation pattern of single crystal β-Ga2O3 under nanoindentation. Materials Science in Semiconductor Processing, 71, 321-325. doi: 10.1016/j.mssp.2017.08.019
Kang, Chengwei and Huang, Han (2017). A comparative study of conventional and high speed grinding characteristics of a thin film multilayer structure. Precision Engineering, 50, 222-234. doi: 10.1016/j.precisioneng.2017.05.010
Roy, Aditi, Mead, James, Wang, Shiliang and Huang, Han (2017). Effects of surface defects on the mechanical properties of ZnO nanowires. Scientific Reports, 7 (1) 9547, 9547. doi: 10.1038/s41598-017-09843-5
Liao, Xinjiang, Mu, Dekui, Wang, Jianxin, Huang, Guoqin, Huang, Hui, Xu, Xipeng and Huang, Han (2017). Formation of TiC via interface reaction between diamond grits and Sn-Ti alloys at relatively low temperatures. International Journal of Refractory Metals and Hard Materials, 66, 252-257. doi: 10.1016/j.ijrmhm.2017.04.005
Kuang, Daitao, Hou, Lizhen, Yu, Bowen, Liang, Bingbing, Deng, Lianwen, Huang, Han, Ma, Songshan, He, Jun and Wang, Shiliang (2017). Gram-scale synthesis, thermal stability, magnetic properties, and microwave absorption application of extremely small Co-C core-shell nanoparticles. Materials Research Express, 4 (7) 075044, 075044.1-075044.12. doi: 10.1088/2053-1591/aa7ad3
Mead, James L., Lu, Mingyuan and Huang, Han (2017). Inducing stable interfacial delamination in a multilayer system by four-point bending of microbridges. Surface and Coatings Technology, 320, 478-482. doi: 10.1016/j.surfcoat.2016.11.069
He, Anshun, Huang, Shuiquan, Yun, Jung-Ho, Wu, Hui, Jiang, Zhengyi, Stokes, Jason, Jiao, Sihai, Wang, Lianzhou and Huang, Han (2017). Tribological performance and lubrication mechanism of alumina nanoparticle water-based suspensions in ball-on-three-plate testing. Tribology Letters, 65 (2) 40. doi: 10.1007/s11249-017-0823-y
Gao, Shang, Huang, Han, Zhu, Xianglong and Kang, Renke (2017). Surface integrity and removal mechanism of silicon wafers in chemo-mechanical grinding using a newly developed soft abrasive grinding wheel. Materials Science in Semiconductor Processing, 63, 97-106. doi: 10.1016/j.mssp.2017.02.001
Wu, Hui, Zhao, Jingwei, Xia, Wenzhen, Cheng, Xiawei, He, Anshun, Yun, Jung Ho, Wang, Lianzhou, Huang, Han, Jiao, Sihai, Huang, Li, Zhang, Suoquan and Jiang, Zhengyi (2017). Analysis of TiO2 nano-additive water-based lubricants in hot rolling of microalloyed steel. Journal of Manufacturing Processes, 27, 26-36. doi: 10.1016/j.jmapro.2017.03.011
Wu, Hui, Zhao, Jingwei, Xia, Wenzhen, Cheng, Xiawei, He, Anshun, Yun, Jung Ho, Wang, Lianzhou, Huang, Han, Jiao, Sihai, Huang, Li, Zhang, Suoquan and Jiang, Zhengyi (2017). A study of the tribological behaviour of TiO2 nano-additive water-based lubricants. Tribology International, 109, 398-408. doi: 10.1016/j.triboint.2017.01.013
Wang, Shiliang, Shan, Zhiwei and Huang, Han (2017). The mechanical properties of nanowires. Advanced Science, 4 (4) 1600332, 405-419. doi: 10.1002/advs.201600332
Gao, Shang and Huang, Han (2017). Recent advances in micro- and nano-machining technologies. Frontiers of Mechanical Engineering, 12 (1), 18-32. doi: 10.1007/s11465-017-0410-9
Kang, Cheng-Wei and Huang, Han (2017). Deformation, failure and removal mechanisms of thin film structures in abrasive machining. Advances in Manufacturing, 5 (1), 1-19. doi: 10.1007/s40436-016-0165-2
Xie, Hongtao, Mead, James, Wang, Shiliang and Huang, Han (2017). The effect of surface texture on the kinetic friction of a nanowire on a substrate. Scientific Reports, 7 (1) 44907, 44907. doi: 10.1038/srep44907
Wang, Yongqiang, Yin, Shaohui and Huang, Han (2017). A comparative study on magnetorheological planarization using modified magnetic yokes and brick magnet. International Journal of Advanced Manufacturing Technology, 91 (5-8), 1-11. doi: 10.1007/s00170-016-9908-2
Shao, Wen, Li, Xingsheng, Sun, Yong and Huang, Han (2017). Parametric study of rock cutting with SMART∗CUT picks. Tunnelling and Underground Space Technology, 61, 134-144. doi: 10.1016/j.tust.2016.09.012
Hu, Yaoxin, Wu, Yueqin, Devendran, Citsabehsan, Wei, Jing, Liang, Yan, Matsukata, Masahiko, Shen, Wei, Neild, Adrian, Huang, Han and Wang, Huanting (2017). Preparation of nanoporous graphene oxide by nanocrystal-masked etching: toward a nacre-mimetic metal-organic framework molecular sieving membrane. Journal of Materials Chemistry A, 5 (31), 16255-16262. doi: 10.1039/c7ta00927e
Roy, Aditi, Xie, Hongtao, Wang, Shiliang and Huang, Han (2016). The kinetic friction of ZnO nanowires on amorphous SiO2 and SiN substrates. Applied Surface Science, 389, 797-801. doi: 10.1016/j.apsusc.2016.07.172
Qiankun, Zhang, Yao, Jiang, Weijun, Shen, Huibin, Zhang, Yuehui, He, Nan, Lin, C.T., Liu, Han, Huang and Xiaolin, Huang (2016). Direct fabrication of high-performance high speed steel products enhanced by LaB6. Materials and Design, 112, 469-478. doi: 10.1016/j.matdes.2016.09.044
Wang, Shiliang, Huang, Qiulai, Wu, Yueqin and Huang, Han (2016). Unique structure and surface-related elastic modulus of alumina nanobelts. Nanotechnology, 27 (47) 475701, 1-7. doi: 10.1088/0957-4484/27/47/475701
Lu, Mingyuan, Mead, James, Wu, Yueqin, Russell, Hugh and Huang, Han (2016). A study of the deformation and failure mechanisms of protective intermetallic coatings on AZ91 Mg alloys using microcantilever bending. Materials Characterization, 120, 337-344. doi: 10.1016/j.matchar.2016.09.020
Crichton, Michael L., Archer-Jones, Cameron, Meliga, Stefano, Edwards, Grant, Martin, Darren, Huang, Han and Kendall, Mark A. F. (2016). Characterising the material properties at the interface between skin and a skin vaccination microprojection device. Acta Biomaterialia, 36, 186-194. doi: 10.1016/j.actbio.2016.02.039
Mao, Cong, Sun, Xiaoli, Huang, Han, Kang, Chengwei, Zhang, Mingjun and Wu, Yueqin (2016). Characteristics and removal mechanism in laser cutting of cBN-WC-10Co composites. Journal of Materials Processing Technology, 230, 42-49. doi: 10.1016/j.jmatprotec.2015.11.014
Mu, D.K., McDonald, S.D., Read, J., Huang, H. and Nogita, K. (2016). Critical properties of Cu6Sn5 in electronic devices: Recent progress and a review. Current Opinion in Solid State and Materials Science, 20 (2), 55-76. doi: 10.1016/j.cossms.2015.08.001
Raphael, Anthony P., Crichton, Michael L., Falconer, Robert J., Meliga, Stefano, Chen, Xianfeng, Fernando, Germain J. P., Huang, Han and Kendall, Mark A. F. (2016). Formulations for microprojection/microneedle vaccine delivery: structure, strength and release profiles. Journal of Controlled Release, 225, 40-52. doi: 10.1016/j.jconrel.2016.01.027
Dong, Zhigang, Gao, Shang, Huang, Han, Kang, Renke and Wang, Ziguang (2016). Surface integrity and removal mechanism of chemical mechanical grinding of silicon wafers using a newly developed wheel. International Journal of Advanced Manufacturing Technology, 83 (5-8), 1231-1239. doi: 10.1007/s00170-015-7584-2
Kang, Chengwei and Huang, Han (2016). Mechanical load-induced interfacial failure of a thin film multilayer in nanoscratching and diamond lapping. Journal of Materials Processing Technology, 229, 528-540. doi: 10.1016/j.jmatprotec.2015.10.011
Huang, Qiulai, Wang, Shiliang, Zhang, Yan, Yu, Bowen, Hou, Lizhen, Su, Geng, Ma, Songshan, Zou, Jin and Huang, Han (2016). Hollow carbon nanospheres with extremely small size as anode material in lithium-ion batteries with outstanding cycling stability. Journal of Physical Chemistry C, 120 (6), 3139-3144. doi: 10.1021/acs.jpcc.5b10455
Xie, Hongtao, Wang, Shiliang and Huang, Han (2016). Characterising the nanoscale kinetic friction using force-equilibrium and energy-conservation models with optical manipulation. Nanotechnology, 27 (6) 065709, 065709. doi: 10.1088/0957-4484/27/6/065709
Yu, Bowen, Zhang, Qiankun, Hou, Lizhen, Wang, Shiliang, Song, Min, He, Yuehui, Huang, Han and Zou, Jin (2016). Temperature-dependent chemical state of the nickel catalyst for the growth of carbon nanofibers. Carbon, 96, 904-910. doi: 10.1016/j.carbon.2015.10.048
Wang, Yongqiang, Yin, Shaohui and Huang, Han (2016). Polishing characteristics and mechanism in magnetorheological planarization using a permanent magnetic yoke with translational movement. Precision Engineering, 43, 93-104. doi: 10.1016/j.precisioneng.2015.06.014
Wang, Xiaojing, Lu, Mingyuan, Qiu, Ling, Huang, Han, Li, Dan, Wang, Huanting and Cheng, Yi-Bing (2016). Graphene/titanium carbide composites prepared by sol-gel infiltration and spark plasma sintering. Ceramics International, 42 (1), 122-131. doi: 10.1016/j.ceramint.2015.08.017
Liu, Haijun, Dong, Zhigang , Huang, Han, Kang, Renke and Zhou, Ping (2015). A new method for measuring the flatness of large and thin silicon substrates using a liquid immersion technique. Measurement Science and Technology, 26 (11) 115008, 115008. doi: 10.1088/0957-0233/26/11/115008
Wang, Shiliang, Hou, Lizhen, Xie, Hongtao and Huang, Han (2015). The kinetic friction between a nanowire and a flat substrate measured using nanomanipulation with optical microscopy. Applied Physics Letters, 107 (10) 103102, 103102.1-103102.4. doi: 10.1063/1.4930576
Lu, Mingyuan and Huang, Han (2015). Interfacial energy release rates of SiN/GaAs film/substrate systems determined using a cyclic loading dual-indentation method. Thin Solid Films, 589, 822-830. doi: 10.1016/j.tsf.2015.07.027
Chang, Haiwei, Lu, Mingyuan, Zhang, Mingxing, Atrens, Andrej and Huang, Han (2015). Strain rate dependence in the nanoindentation-induced deformation of Mg-Al intermetallic compounds produced by packed powder diffusion coating. Metals and Materials International, 21 (5), 793-798. doi: 10.1007/s12540-015-5055-9
Lu, Mingyuan, Russell, Hugh and Huang, Han (2015). Fracture strength characterization of protective intermetallic coatings on AZ91E Mg alloys using FIB-machined microcantilever bending technique. Journal of Materials Research, 30 (10), 1678-1685. doi: 10.1557/jmr.2015.104
Xie, Hongtao, Wang, Shiliang and Huang, Han (2015). Kinetic and static friction between alumina nanowires and a Si substrate characterized using a bending manipulation method. Journal of Materials Research, 30 (11), 1852-1860. doi: 10.1557/jmr.2015.129
Hou, Lizhen Zou, Wang, Shiliang and Huang, Han (2015). A simple criterion for determining the static friction force between nanowires and flat substrates using the most-bent-state method. Nanotechnology, 26 (16) 165702, 165702-1-165702-7. doi: 10.1088/0957-4484/26/16/165702
Wang, Shiliang, Wu, Yueqin, Lin, Liangwu, He, Yuehui and Huang, Han (2015). Fracture strain of SiC nanowires and direct evidence of electron-beam induced amorphisation in the strained nanowires. Small, 11 (14), 1672-1676. doi: 10.1002/smll.201402202
Wang, Y. Q., Yin, S. H., Huang, H., Chen, F. J. and Deng, G. J. (2015). Magnetorheological polishing using a permanent magnetic yoke with straight air gap for ultra-smooth surface planarization. Precision Engineering, 40, 309-317. doi: 10.1016/j.precisioneng.2014.11.001
Liu, Huiyuan and Huang, Han (2015). Design and structural analysis of robot arm for high performance packaging robots. Applied Mechanics and Materials, 741, 669-674. doi: 10.4028/www.scientific.net/AMM.741.669
Liu, Jun, Yu, Bowen, Zhang, Qiankun, Hou, Lizhen, Huang, Qiulai, Song, Chunrui, Wang, Shiliang, Wu, Yueqin, He, Yuehui, Zou, Jin and Huang, Han (2015). Synthesis and magnetic properties of Fe3C-C core-shell nanoparticles. Nanotechnology, 26 (8) 085601, 085601. doi: 10.1088/0957-4484/26/8/085601
Kang, Cheng Wei and Huang, Han (2015). FEM stress analysis of interfacial failure of multilayered thin film structures in nanoscratching. Advanced Materials Research, 1136, 289-292. doi: 10.4028/www.scientific.net/AMR.1136.289
Chen, Fengjun, Yin, Shaohui, Huang, Han and Ohmori, Hitoshi (2015). Fabrication of small aspheric moulds using single point inclined axis grinding. Precision Engineering, 39, 107-115. doi: 10.1016/j.precisioneng.2014.06.009
Li, X.P., Roberts, M., Liu, Y.J., Kang, C.W., Huang, H. and Sercombe, T.B. (2015). Effect of substrate temperature on the interface bond between support and substrate during selective laser melting of Al-Ni-Y-Co-La metallic glass. Materials and Design, 65, 1-6. doi: 10.1016/j.matdes.2014.08.065
Li, X. P., Kang, C. W., Huang, H. and Sercombe, T. B. (2014). The role of a low-energy-density re-scan in fabricating crack-free Al(85)Ni(5)Y(6)Co(2)Fe(2) bulk metallic glass composites via selective laser melting. Materials and Design, 63, 407-411. doi: 10.1016/j.matdes.2014.06.022
Yu, Bowen, Wang, Shiliang, Zhang, Qiankun, He, Yuehui, Huang, Han and Zou, Jin (2014). Ni3C-assisted growth of carbon nanofibres 300 °c by thermal CVD. Nanotechnology, 25 (32) 325602, 325602. doi: 10.1088/0957-4484/25/32/325602
Ma, Liang, Yu, Bowen, Wang, Shiliang, Su, Geng, Huang, Han, Chen, Hong, He, Yuehui and Zou, Jin (2014). Controlled synthesis and optical properties of Cu/C core/shell nanoparticles. Journal of Nanoparticle Research, 16 (8) 2545, 1-8. doi: 10.1007/s11051-014-2545-5
Li, X. P., Kang, C. W., Huang, H., Zhang, L. C. and Sercombe, T. B. (2014). Selective laser melting of an Al(86)Ni(6)Y(4.5)Co(2)La(1.5) metallic glass: processing, microstructure evolution and mechanical properties. Materials Science and Engineering A, 606, 370-379. doi: 10.1016/j.msea.2014.03.097
Chen, YunHui, Han, Huang, Fang, FengZhou and Hu, XiaoTang (2014). MD simulation of nanometric cutting of copper with and without water lubrication. Science China-Technological Sciences, 57 (6), 1154-1159. doi: 10.1007/s11431-014-5519-z
Lu, Mingyuan and Huang, Han (2014). Determination of the energy release rate in the interfacial delamination of silicon nitride film on gallium arsenide substrate via nanoindentation. Journal of Materials Research, 29 (6), 801-810. doi: 10.1557/jmr.2014.41
Chang, H. -W., Zhang, M. -X., Atrens, A. and Huang, H. (2014). Nanomechanical properties of Mg–Al intermetallic compounds produced by packed powder diffusion coating (PPDC) on the surface of AZ91E. Journal of Alloys and Compounds, 587, 527-532. doi: 10.1016/j.jallcom.2013.10.235
Wang, Shiliang, Chen, Guoliang, Huang, Han, Ma, Shujun, Xu, Hongyi, He, Yuehui and Zou, Jin (2013). Vapor-phase synthesis, growth mechanism and thickness-independent elastic modulus of single-crystal tungsten nanobelts. Nanotechnology, 24 (50) 505705, 505705.1-505705.9. doi: 10.1088/0957-4484/24/50/505705
Xie, Hongtao and Huang, Han (2013). Characterization of the interfacial strength of SiNx/GaAs film/substrate systems using energy balance in nanoindentation. Journal of Materials Research, 28 (22), 3137-3145. doi: 10.1557/jmr.2013.317
He, Anshun and Huang, Han (2013). Nanoscratch characteristics and interfacial adhesion energy of SiN/GaAs film/substrate bilayer systems. International Journal of Surface Science and Engineering, 7 (4), 382-396. doi: 10.1504/IJSURFSE.2013.057618
Wang, Qiang, Birbilis, Nick, Huang, Han and Zhang, Ming-Xing (2013). Microstructure characterization and nanomechanics of cold sprayed pure Al and Al-Al2O3 composite coatings. Surface and Coatings Technology, 232, 216-223. doi: 10.1016/j.surfcoat.2013.05.009
Ma, Shujun, Wang, Shiliang, Iacopi, Francesca and Huang, Han (2013). A resonant method for determining residual stress and elastic modulus of a thin film. Applied Physics Letters, 103 (3) 031603, 031603.1-031603.5. doi: 10.1063/1.4813843
Wang, Shiliang, He, Shiliang, Huang, Han, Zou, Jin, Auchterlonie, Graeme John, Hou, Lizhen and Huang, Baiyun (2013). An improved loop test for experimentally approaching the intrinsic strength of alumina nanoscale whiskers. Nanotechnology, 24 (28) 285703, 285703.1-285703.7. doi: 10.1088/0957-4484/24/28/285703
Lu, Mingyuan, Xie, Hongtao, Huang, Han, Zou, Jin and He, Yuehui (2013). Indentation-induced delamination of plasma-enhanced chemical vapor deposition silicon nitride film on gallium arsenide substrate. Journal of Materials Research, 28 (8), 1047-1055. doi: 10.1557/jmr.2013.31
Wu, Y. Q., McDonald, S. D., Read, J., Huang, H. and Nogita, K. (2013). Determination of the minimum Ni concentration to prevent the η to η4+1 polymorphic transformation of stoichiometric Cu6Sn5. Scripta Materialia, 68 (8), 595-598. doi: 10.1016/j.scriptamat.2012.12.012
Mu, D., Huang, H., McDonald, S. D., Read, J. and Nogita, K. (2013). Investigating the mechanical properties, creep and crack pattern of Cu6Sn5 and (Cu,Ni)(6)Sn-5 on diverse crystal planes. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 566, 126-133. doi: 10.1016/j.msea.2012.12.057
Crichton, Michael L., Chen, Xianfeng, Huang, Han and Kendall, Mark A. F. (2013). Elastic modulus and viscoelastic properties of full thickness skin characterised at micro scales. Biomaterials, 34 (8), 2087-2097. doi: 10.1016/j.biomaterials.2012.11.035
Mu, Dekui, Huang, Han, McDonald, Stuart D. and Nogita, Kazuhiro (2013). Creep and mechanical properties of Cu6Sn5 and (Cu,Ni)(6)Sn-5 at elevated temperatures. Journal of Electronic Materials, 42 (2), 304-311. doi: 10.1007/s11664-012-2227-y
Irwan, Rudy and Huang, Han (2013). Surface and subsurface deformation characteristics of cemented tungsten carbide under nanoscratching. International Journal of Surface Science and Engineering, 7 (2), 122-134. doi: 10.1504/IJSURFSE.2013.053698
Shimizu, Jun, Zhou, Libo, Yamamoto, Takeyuki, Ojima, Hirotaka, Onuki, Teppei and Huang, Han (2013). Mold pattern fabrication by nanoscratching. International Journal of Automation Technology, 7 (6), 686-693. doi: 10.20965/ijat.2013.p0686
He, An Shun and Huang, Han (2013). Interfacial failure of SiN/GaAs film/substrate bilayers induced by nanoscratch. Advanced Materials Research, 652-654, 1856-1861. doi: 10.4028/www.scientific.net/amr.652-654.1856
Lu, Mingyuan, Xie, Hongtao and Huang, Han (2013). Characterisation of interfacial adhesion of thin film/substrate systems using indentation-induced delamination: a focused review. Key Engineering Materials, 533, 201-222. doi: 10.4028/www.scientific.net/KEM.533.201
Wu, Yueqin, Huang, Han and Zou, Jin (2013). A focused review on nanoscratching-induced deformation of monocrystalline silicon. International Journal of Surface Science and Engineering, 7 (1), 51-80. doi: 10.1504/IJSURFSE.2013.051918
Huang, Hui, Huang, Guoqin, Xu, Xipeng and Huang, Han (2013). An experimental study of machining characteristics and tool wear in the diamond wire sawing of granite. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227 (7), 943-953. doi: 10.1177/0954405413478262
Irwan, R., Huang, H., Zheng, H. Y. and Wu, H. (2013). Mechanical properties and material removal characteristics of soft-brittle HgCdTe single crystals. Materials Science and Engineering A - Structural Materials Properties Microstructure And Processing, 559, 480-485. doi: 10.1016/j.msea.2012.08.129
He, Anshun, Huang, He and Zhou, Libo (2012). Deformation and removal characteristics of LiTaO3 single crystals in nanoindentation and nanoscratch. International Journal of Abrasive Technology, 5 (3), 258-269. doi: 10.1504/IJAT.2012.051036
Liu, Sheng, Huang, Han and Gu, Yuantong (2012). Deconvolution of mechanical properties of thin films from nanoindentation measurement via finite element optimization. Thin Solid Films, 526, 183-190. doi: 10.1016/j.tsf.2012.11.024
Wu, Y. Q., Barry, J., Yamamoto, T., Gu, Q. F., McDonald, S. D., Matsumura, S., Huang, H. and Nogita, K. (2012). A new phase in stoichiometric Cu6Sn5. Acta Materialia, 60 (19), 6581-6591. doi: 10.1016/j.actamat.2012.08.024
Mu, D., Huang, H. and Nogita, K. (2012). Anisotropic mechanical properties of Cu6Sn5 and (Cu,Ni)6Sn5. Materials Letters, 86, 46-49. doi: 10.1016/j.matlet.2012.07.018
Ma, Shujun, Huang, Han, Lu, Mingyuan and Veidt, Martin (2012). A simple resonant method that can simultaneously measure elastic modulus and density of thin films. Surface and Coatings Technology, 209, 208-211. doi: 10.1016/j.surfcoat.2012.08.072
Mu, Dekui, Yasuda, Hideyuki, Huang, Han and Nogita, Kazuhiro (2012). Growth orientations and mechanical properties of Cu6Sn5 and (Cu,Ni)6Sn5 on poly-crystalline Cu. Journal of Alloys and Compounds, 536, 38-46. doi: 10.1016/j.jallcom.2012.04.110
Wu, Y. Q., Huang, H. and Zou, J. (2012). Lattice bending in monocrystalline GaAs induced by nanoscratching. Materials Letters, 80, 187-190. doi: 10.1016/j.matlet.2012.04.057
Li, X. P., Yan, M., Wang, J. Q., Huang, H., Kong, C., Schaffer, G. B. and Qian, M. (2012). Non-isothermal crystallization kinetics and mechanical properties of Al86Ni6Y4.5Co2La1.5 metallic glass powder. Journal of Alloys and Compounds, 530, 127-131. doi: 10.1016/j.jallcom.2012.03.083
Wang, Shiliang, Huang, Xiaolin, He, Yuehui, Huang, Han, Wu, Yueqin, Hou, Lizhen, Liu, Xinli, Yang, Taimin, Zou, Jin and Huang, Baiyun (2012). Synthesis, growth mechanism and thermal stability of copper nanoparticles encapsulated by multi-layer graphene. Carbon, 50 (6), 2119-2125. doi: 10.1016/j.carbon.2011.12.063
Zhou, L., Tian, Y. B., Huang, H., Sato, H. and Shimizu, J. (2012). A study on the diamond grinding of ultra-thin silicon wafers. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 226 (1), 66-75. doi: 10.1177/0954405411414768
Zhong, Jie, Liang, Shuquan, Wang, Kun, Wang, Huanting, Williams, Tim, Huang, Han and Cheng, Yi-Bing (2011). Synthesis of mesoporous carbon-bonded TiC/SiC ceramics by carbothermal reduction of sol-gel derived monolithic precursor. Journal of the American Ceramic Society, 94 (11), 4025-4031. doi: 10.1111/j.1551-2916.2011.04662.x
Liu, Sheng, Gu, Yuantong and Huang, Han (2011). A new tip area function for instrumented nanoindentation at extremely small contact depths. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 528 (27), 7948-7951. doi: 10.1016/j.msea.2011.07.025
Wang, Shiliang, He, Yuehui, Liu, Xinli, Huang, Han, Zou, Jin, Song, Min, Huang, Baiyun and Liu, C. T. (2011). Novel C/Cu sheath/core nanostructures synthesized via low-temperature MOCVD. Nanotechnology, 22 (40) 405704, 405704-1-405704-7. doi: 10.1088/0957-4484/22/40/405704
Sumitomo, Taro, Huang, Han, Zhou, Libo and Shimizu, Jun (2011). Nanogrinding of multi-layered thin film amorphous Si solar panels. International Journal of Machine Tools and Manufacture, 51 (10-11), 797-805. doi: 10.1016/j.ijmachtools.2011.07.001
Tang, Xue-Gang, Hou, Meng, Truss, Rowan, Zou, Jin, Yang, Wei, Dong, Zhi-Gang and Huang, Han (2011). An unexpected plasticization phenomenon and a constant of the change rate of viscoelastic properties for polymers during nanoindentation test. Journal of Applied Polymer Science, 122 (2), 885-890. doi: 10.1002/app.34032
Wu, Y. Q., Huang, H. and Zou, J. (2011). Transmission electron microscopy characterization of the deformation of CdZnTe single crystals induced by nanoscratching. Scripta Materialia, 65 (5), 392-395. doi: 10.1016/j.scriptamat.2011.05.008
Jiang, Y., He, Y.H., Huang, B. Y., Zou, J., Huang, H., Xu, N. P. and Liu, C. T. (2011). Criterion to control self-propagation high temperature synthesis for porous Ti-Al intermetallics. Powder Metallurgy, 54 (3), 404-407. doi: 10.1179/003258910X12707304455266
Crichton, Michael L., Donose, Bogdan C., Chen, Xianfeng, Raphael, Anthony P., Huang, Han and Kendal, Mark A.F. (2011). The viscoelastic, hyperelastic and scale dependent behaviour of freshly excised individual skin layers. Biomaterials, 32 (20), 4670-4681. doi: 10.1016/j.biomaterials.2011.03.012
Ding, Tao, Wu, Yueqin, Song, Junqiang, Li, Juan, Huang, Han, Zou, Jin and Cai, Qun (2011). Crystalline structures and misfit strain inside Er silicide nanocrystals self-assembled on Si(001) substrates. Nanotechnology, 22 (24) 245707, Article number 245707. doi: 10.1088/0957-4484/22/24/245707
Sumitomo, Taro, Huang, Han and Zhou, Libo (2011). Multi-scale deformation and material removal in amorphous Si thin film solar panels. International Journal of Nanomanufacturing, 7 (1), 39-53. doi: 10.1504/IJNM.2011.039961
Sumitomo, Taro, Huang, Han and Zhou, Libo (2011). Deformation and material removal in a nanoscale multi-layer thin film solar panel using nanoscratch. International Journal of Machine Tools and Manufacture, 51 (3), 182-189. doi: 10.1016/j.ijmachtools.2010.11.012
Wang, Shiliang, He, Yuehui, Liu, Xinli, Zhang, Quan, Zou, Jin, Huang, Han, Song, Min, Huang, Baiyun, Liu, C. T. and Du, Yong (2011). Large-scale synthesis of tungsten single-crystal microtubes via vapor-deposition process. Journal of Crystal Growth, 316 (1), 137-144. doi: 10.1016/j.jcrysgro.2010.10.222
Liu, Sheng, Huang, Han and Gu, Yuantong (2011). A nanoscratch method for measuring hardness of thin films. International Journal of Nanomanufacturing, 7 (5-6), 427-435. doi: 10.1504/IJNM.2011.043680
Zhang, Zhenyu, Huo, Fengwei, Wu, Yueqin and Huang, Han (2011). Grinding of silicon wafers using an ultrafine diamond wheel of a hybrid bond material. International Journal of Machine Tools and Manufacture, 51 (1), 18-24. doi: 10.1016/j.ijmachtools.2010.10.006
Zhang, Zhenyu, Wu, Yueqin, Guo, Dongming and Huang, Han (2011). Phase transformation of single crystal silicon induced by grinding with ultrafine diamond grits. Scripta Materialia, 64 (2), 177-180. doi: 10.1016/j.scriptamat.2010.09.038
Wu, Y. Q., Huang, H., Zou, J., Zhang, L. C. and Dell, J. M. (2010). Nanoscratch-induced phase transformation of monocrystalline Si. Scripta Materialia, 63 (8), 847-850. doi: 10.1016/j.scriptamat.2010.06.034
Zhang, Zhenyu, Wu, Yueqin and Huang, Han (2010). New deformation mechanism of soft-brittle CdZnTe single crystals under nanogrinding. Scripta materialia, 63 (6), 621-624. doi: 10.1016/j.scriptamat.2010.05.043
Ohsone, Wataru, Shimizu, Jun, Zhou, Li Bo, Ojima, Hirotaka, Onuki, Teppei, Yamamoto, Takeyuki and Huang, Han (2010). Mold fabricated by nanoscratching for nanoimprint lithography. Advanced Materials Research, 126-128, 843-848. doi: 10.4028/www.scientific.net/AMR.126-128.843
Wang, D.J., Huang, Y.J., Shen, J., Wu, Y.Q., Huang, H. and Zou, J. (2010). Effect of cooling rate on microstructure and deformation behavior of Ti-based metallic glassy/crystalline powders. Materials Science and Engineering A - Structural Materials Properties Microstructure And Processing, 527 (21-22), 5750-5754. doi: 10.1016/j.msea.2010.06.019
Cribb, B.W., Lin, C.L., Rintoul, L., Rasch, R., Hasenpusch, J. and Huang, H. (2010). Hardness in arthropod exoskeletons in the absence of transition metals. Acta Biomaterialia, 6 (8), 3152-3156. doi: 10.1016/j.actbio.2010.02.009
Dong, Zhigang, Huang, Han and Kang, Renke (2010). An investigation of the onset of elastoplastic deformation during nanoindentation in MgO single crystal (001) and (110) planes. Materials Science And Engineering A Structural Materials Properties Microstructure And Processing, 527 (16-17), 4177-4184. doi: 10.1016/j.msea.2010.03.037
Sun, H. Q., Irwan, R., Huang, H. and Stachowiak, GW (2010). Surface characteristics and removal mechanism of cemented tungsten carbides in nanoscratching. Wear, 268 (11-12), 1400-1408. doi: 10.1016/j.wear.2010.02.014
Chen, F. J., Yin, S. H., Huang, H., Ohmori, H., Wang, Y., Fan, Y. F. and Zhu, Y. J. (2010). Profile error compensation in ultra-precision grinding of aspheric surfaces with on-machine measurement. International Journal of Machine Tools and Manufacture, 50 (5), 480-486. doi: 10.1016/j.ijmachtools.2010.01.001
Wang, D. J., Huang, Y. J., Shen, J., Wu, Y. Q., Huang, H. and Zou, J. (2010). Temperature influence on sintering with concurrent crystallization behavior in Ti-based metallic glassy powders. Materials Science and Engineerng A-Structural Materials Properties Microstructure and Processing, 527 (10-11), 2662-2668. doi: 10.1016/j.msea.2009.12.052
Zhang, M. -X, Huang, H., Spencer, K. and Shi, Y. N. (2010). Nanomechanics of Mg-Al intermetallic compounds. Surface and Coatings Technology, 204 (14), 2118-2122. doi: 10.1016/j.surfcoat.2009.11.031
Zhu, Zhengwang, Zhang, Haifeng, Wang, Hao, Ding, Bingzhe, Hu, Zhuang-Qi and Huang, Han (2010). Influence of casting temperature on microstructures and mechanical properties of Cu50Zr45.5Ti2.5Y2 metallic glass prepared using copper mold casting (vol 24, pg 3108, 2009). Journal of Materials Research, 25 (3), 605-605. doi: 10.1557/JMR.2010.0080
Yan, M., Mori, T., Zou, J., Huang, H. and Drennan, J. (2010). Microstructures and mechanical properties of Ce1-xCaxO2-y (x=0.05, 0.1, 0.2) with different sintering temperatures. Journal of the European Ceramic Society, 30 (3), 669-675. doi: 10.1016/j.jeurceramsoc.2009.09.005
Huang, Han and Zhang, Liangchi (2009). Advanced Materials Research: Preface. Advanced Materials Research, 76-78 doi: 10.4028/www.scientific.net/AMR.76-78.-1
Huang, H., Wu, Y. Q., Wang, S. L., He, Y. H., Zou, J., Huang, B. Y. and Liu, C. T. (2009). Mechanical properties of single crystal tungsten microwhiskers characterized by nanoindentation. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 523 (1-2), 193-198. doi: 10.1016/j.msea.2009.05.060
Zhu, Zhenwang, Zhang, Haifeng, Wang, Hao, Ding, Bingzhe, Hu, Zhuang-Qi and Huang, Han (2009). Influence of casting temperature on microstructures and mechanical properties of Cu50Zr45.5Ti2.5Y2 alloy prepared using copper mold casting. Journal of Materials Research, 24 (10), 3108-3115. doi: 10.1557/jmr.2009.0373
Tsukamoto, Hideaki, Dong, Zhigang, Huang, Han, Nishimura, Tetsuro and Nogita, Kazuhiro (2009). Nanoindentation characterization of intermetallic compounds formed between Sn-Cu(-Ni) ball grid arrays and Cu substrates. Materials Science and Engineering B, 164 (1), 44-50. doi: 10.1016/j.mseb.2009.06.013
Wang, S.L., He, Y.H., Zou, J, Wang, Y and Huang, H (2009). Growth of single-crystal W whiskers during humid H2/N2 reduction of Ni, Fe-Ni, and Co-Ni doped tungsten oxide. JOURNAL OF ALLOYS AND COMPOUNDS, 482 (1-2), 61-66. doi: 10.1016/j.jallcom.2009.02.126
Wang, S. L., He, Y, H., Fang, X, S., Zou, J., Wang, Y., Huang, H., Costa, P.M.F.J., Song, M., Huang, B., Liu, C.T., Liaw, P.K., Bando, Y. and Golberg, D. (2009). Structure and field-emission properties of sub-micrometer-sized tungsten-whisker arrays fabricated by vapor deposition. Advanced Materials, 21 (23), 2387-2392. doi: 10.1002/adma.200803401
Huang, H., Dell, J. M. and Liu, S. (2009). Nanostructural characteristics and mechanical properties of low temperature plasma enhanced chemical vapor deposited silicon nitride thin films. Journal of Nanoscience and Nanotechnology, 9 (6), 3734-3741. doi: 10.1166/jnn.2009.NS59
Wu, Y.Q., Huang, H., Zou, J. and Dell, J.M. (2009). Nanoscratch-induced deformation of single crystal silicon. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, 27 (3), 1374-1377. doi: 10.1116/1.3049517
Cribb, B. W., Rathmell, A., Charters, R., Rasch, R., Huang, H. and Tibbetts, I. R. (2009). Structure, composition and properties of naturally occurring non-calcified crustacean cuticle. Arthropod Structure and Development, 38 (3), 173-178. doi: 10.1016/j.asd.2008.11.002
谢桂芝 Xie, Guizhi, 黄 含 Huang, Han, 徐西鹏 Xu, Xipeng and 黄红武 Huang, Hongwu (2009). 氮化硅陶瓷高效深磨温度的研究. Study on the temperature in the high efficiency deep grinding of silicon nitride. 机械工程学报, 45 (3), 109-114. doi: 10.3901/JME.2009.03.109
Costa, P.M.F.J, Fang, X.S., Wang, S.L., He, Y.H., Bando, Y., Mitome, M., Zou, J., Huang, H. and Golberg, D. (2009). Two-Probe Electrical Measurements in Transmission Electron Microscopes-Behavioral Control of Tungsten Microwires. MICROSCOPY RESEARCH AND TECHNIQUE, 72 (2), 93-100. doi: 10.1002/jemt.20648
Huang, Huang and Ding, Jun (2009). Editorial. International Journal of Surface Science and Engineering, 3 (1-2), 1-2.
Sun, H.Q., Irwan, R., Huang, H. and Stachowiak, G. (2009). Effect of Microstructure on Mechanical Properties and Wear Characteristics of Cemented Tungsten Carbides. Advanced Materials Research, 76-78, 609-612. doi: 10.4028/www.scientific.net/AMR.76-78.609
Liu, S., Gu, Y.T. and Huang, H. (2009). Determination of Elastic Modulus of Thin Coating Materials Using Nanoindentation and Finite Element Analysis. Advanced Materials Research, 76-78, 392-397. doi: 10.4028/www.scientific.net/AMR.76-78.392
Dong, Z., Huang, H. and Kang, R. (2009). Deformation and acoustic emission during nanoindentation on single crystal MgO (001) plane. Advanced Materials Research, 76-78, 404-409. doi: 10.4028/www.scientific.net/AMR.76-78.404
Huang, H. (2009). High speed griding of advanced ceramics: A review. Key Engineering Materials, 404, 11-22. doi: 10.4028/www.scientific.net/KEM.404.11
Huang, Han, Wu,Y. Q., Wang, Y., Zou, Jin and Zhou, Li Bo (2009). Subsurface structures of monocrystalline silicon generated by nanogrinding. Key Engineering Materials, 389-390, 465-468. doi: 10.4028/www.scientific.net/KEM.389-390.465
Xie, G. Z. and Huang, Han (2008). An experimental investigation of temperature in high speed deep grinding of partially stabilized zirconia. International Journal of Machine Tools & Manufacture, 48 (14), 1562-1568. doi: 10.1016/j.ijmachtools.2008.06.002
Yin, Ling and Huang, Han (2008). Brittle materials in nano-abrasive fabrication of optical mirror-surfaces. Precision Engineering, 32 (4), 336-341. doi: 10.1016/j.precisioneng.2007.09.001
Wang, S. L., He, Y. H., Zou, J., Wang, Y., Huang, H., Huang, B. Y., Liu, C. T. and Liaw, P. K (2008). Catalytic growth of metallic tungsten whiskers based on the vapor-solid-solid mechanism. Nanotechnology, 19 (34) 345604, 345604-Article Number: 345604. doi: 10.1088/0957-4484/19/34/345604
Irwan, Rudy and Huang, Han (2008). Mechanical properties and fracture characteristics of cemented tungsten carbine with fine microstructure studied by nanoidentation. International Journal of Surface Science and Engineering, 2 (1/2), 29-40. doi: 10.1504/IJSURFSE.2008.018966
Shang, Zhentao, Huang, Han, Tang, Kun and Yin, Shaohui (2008). Coolant effect on grinding performance in high-speed deep grinding of 40Cr steel. Metal Finishing, 106 (5), 16-21. doi: 10.1016/S0026-0576(08)80120-1
Cribb, Bronwen W., Stewart, A., Huang, H., Truss, R. W., Noller, B.N., Rasch, R. and Zalucki, M.P. (2008). Unique zinc mass in mandibles separates drywood termites from other groups of termites. Naturwissenschaften, 95 (5), 433-441. doi: 10.1007/s00114-008-0346-3
Xie, Gui-Zhi, Huang, Han, Sheng, Xiao-Min and Mi, Hai-Qing (2008). Investigation on the grinding force and the ground damages in the high efficiency deep grinding of advanced ceramics. Hunan Daxue Xuebao/Journal of Hunan University Natural Sciences, 35 (5), 26-30.
Huang, H., Wang, B. L., Wang, Y., Zou, J. and Zhou, L. (2008). Characteristics of silicon substrates fabricated using nanogrinding and chemo-mechanical-grinding. Materials Science and Engineering: A, 479 (1-2), 373-379. doi: 10.1016/j.msea.2007.06.061
Wang, B.L., Huang, H., Zou, J. and Zhou, L. (2008). Nanomechanical properties and nanostructure of CMG and CMP machined Si substrates. Key Engineering Materials, 381-382, 525-528. doi: 10.4028/www.scientific.net/KEM.381-382.525
Cribb, Bronwen W., Stewart, Aaron, Huang, Han, Truss, Rowan, Noller, Barry, Rasch, Ronald and Zalucki, Myron P. (2008). Insect mandibles—comparative mechanical properties and links with metal incorporation. Naturwissenschaften, 95 (1), 17-23. doi: 10.1007/s00114-007-0288-1
郭 力 Guo, Li, 李 波 Li, Bo, 盛晓敏 Sheng, Xiaomin and 黄 含 Huang, Han (2007). 工程陶瓷磨削温度研究的进展. Review of grinding temperature research for engineering ceramics. 中国机械工程第, 18 (19), 2388-2393.
Huang, H., Irwan, R. and Kurriyagawa, T. (2007). A study on deformation and removal mechanisms of tungsten carbide using nanoindentation. Key Engineering Materials, 329, 385-390. doi: 10.4028/0-87849-416-2.385
谢桂芝 Xie, Guizhi, 黄红武Huang, Hongwu, 黄 含Huang, Han, 盛晓敏 Sheng, Xiaomin, 宓海青 Mi, Haiqing and 熊万里 Xiong, Wanli (2007). 工程陶瓷材料高效深磨的试验研究. Experimental investigation of advanced ceramics in high efficiency deep grinding. 机械工程学报, 43 (1), 176-184. doi: 10.3901/JME.2007.01.176
Huang, H. and Kuriyagawa, T. (2007). Nanometric grinding of axisymmetric aspherical mould inserts for optic/photonic applications. International Journal of Machining and Machinability of Materials, 2 (1), 71-84. doi: 10.1504/IJMMM.2007.012668
Huang, H. and Yin, L. (2007). Grinding characteristics of engineering ceramics in high speed regime. International Journal of Abrasive Technology, 1 (1), 78-93. doi: 10.1504/IJAT.2007.013850
Shang, Z.T., Huang, H., Wang, S.Q., Sheng, X.M. and Mi, H.Q. (2007). Effects of ELID on high speed grinding of partially stabilized zirconia. Key Engineering Materials, 329, 131-136. doi: 10.4028/0-87849-416-2.131
Huang, H., Chen, W.K. and Kuriyagawa, T. (2007). Profile error compensation approaches for parallel nanogrinding of aspherical mould inserts. International Journal of Machine Tools & Manufacture, 47 (15), 2237-2245. doi: 10.1016/j.ijmachtools.2007.06.008
Wang, Y., Zou, J., Huang, H., Zhou, L., Wang, B. L. and Wu, Y. Q. (2007). Formation mechanism of nanocrystalline high-pressure phases in silicon during nanogrinding. Nanotechnology, 18 (46) 465705, 465705-1-465705-5. doi: 10.1088/0957-4484/18/46/465705
Zheng, H.Y. and Huang, H. (2007). Ultrasonic vibration-assisted femtosecond laser machining of microholes. Journal of Micromechanics And Microengineering, 17 (8) N03, N58-N61. doi: 10.1088/0960-1317/17/8/N03
Shang, Zhen-Tao, Huang, Han, Sheng, Xiao-Min and Mi, Hai-Qing (2007). An experimental investigation of ELID high speed grinding technology for silicon nitride ceramics. Hunan Daxue Xuebao/Journal of Hunan University Natural Sciences, 34 (12), 30-34.
Ramesh, K. and Huang, H. (2006). Use of wheel speed as a parameter to inhibit surface crack generation in the grinding of wear-resistant fillers. International Journal of Advanced Manufacturing Technology, 28 (7-8), 701-706. doi: 10.1007/s00170-004-2209-1
Ramesh, K. and Huang, H. (2006). Erratum: Use of wheel speed as a parameter to inhibit surface crack generation in the grinding of wear-resistant fillers (International Journal of Advanced Manufacturing Technology (2005) DOI: 10.1007/s00170-004-2209-1). International Journal of Advanced Manufacturing Technology, 28 (7-8), 854-854. doi: 10.1007/s00170-005-2810-y
Huang, H, Winchester, K J, Dell, J M and Faraone, L (2006). Design and development of tunable filters for MEMS adaptive infrared detectors. Nanotechnology and Precision Engineering, 4 (1), 38-45.
Shang, Zhentao, Huang, Han, Wang, Shuqi, Xiong, Wanli, Sheng, X.iaomin and Mi, Haiqing (2006). Experimental study on truing of bronze-bonded diamond wheels with coarse abrasive grits using a novel hybrid method. Jingangshi yu Moliao Moxue Gongcheng, 156 (5), 42-48.
Huang, H and Yin, L (2006). An experimental investigation of fabrication mechanisms of optic fibre end faces using nano/microindentation and nanogrinding. International Journal of Nanomanufacturing, 1 (1), 47-61. doi: 10.1504/IJNM.2006.011379
Huang, H., Winchester, K. J., Suvorova, A., Lawn, B. R., Liu, Y., Hu, X. Z., Dell, J. M. and Faraone, L. (2006). Effect of deposition conditions on mechanical properties of low-temperature PECVD silicon nitride films. Materials Science And Engineering A-structural Materials Properties Microstructure And Processing, 435, 453-459. doi: 10.1016/j.msea.2006.07.015
Huang, Han-Kuei, Bailis, Julie M., Leverson, Joel D., Gómez, Eliana B., Forsburg, Susan L. and Hunter, Tony (2005). Suppressors of Bir1p (Survivin) identify roles for the chromosomal passenger protein Pic1p (INCENP) and the replication initiation factor Psf2p in chromosome segregation. Molecular and Cellular Biology, 25 (20), 9000-9015. doi: 10.1128/MCB.25.20.9000-9015.2005
Huang, H., Hu, X. Z., Liu, Y., Bush, M., Winchester, K., Musca, C., Dell, J. and Faraone, L. (2005). Characterization of mechanical properties of silicon nitride thin films for MEMS devices by nanoindentation. Journal of Materials Science and Technology, 21 (Suppl. 1), 13-16.
Huang, H., Winchester, K., Liu, Y., Hu, X.Z., Musca, C. A., Dell, J. M. and Faraone, L. (2005). Determination of mechanical properties of PECVD silicon nitride thin films for tunable MEMS Fabry-Pérot optical filters. Journal of Micromechanics and Microengineering, 15 (3), 608-614. doi: 10.1088/0960-1317/15/3/024
Chen, W.K., Kuriyagawa, T., Huang, H. and Yosihara, N. (2005). Machining of micro aspherical mould inserts. Precision Engineering, 29 (3), 315-323. doi: 10.1016/j.precisioneng.2004.11.002
Wang, S. Q., Huang, H.W., Shang, Z. T., Huang, H., Sheng, S. M. and HQ, M. (2005). An experimental investigation of effects of electrolytes on the formation of oxide films involved in ELID grinding. Precision Manufacturing and Automation, 164 (4), 14-23.
Fang, F. Z., Ramesh, K., Liu, X. D., Liu, Y. C. and Huang, H. (2005). Polishing micro holes of optical fibre ferrules. Nami Jishu yu Jingmi Gongcheng, 3 (2), 146-150.
Huang, H., Zheng, H.Y. and Liu, Y. (2005). Experimental investigations of the machinability of Ni50.6Ti49.4 alloy. Smart Materials and Structures, 14 (5), S297-S301. doi: 10.1088/0964-1726/14/5/019
Yin, L, Huang, H, Ramesh, K and Huang, T (2005). High speed versus conventional grinding in high removal rate machining of alumina and alumina-titania. International Journal of Machine Tools & Manufacture, 45 (7-8), 897-907. doi: 10.1016/j.ijmachtools.2004.10.016
Chen, WK, Huang, H and Yin, L (2005). Loose abrasive truing and dressing of resin bond diamond cup wheels for grinding fibre optic connectors. Journal of Materials Processing Technology, 159 (2), 229-239. doi: 10.1016/j.jmatprotec.2004.05.010
Huang, H, Kanno, S, Liu, XD and Gong, ZM (2005). Highly integrated and automated high-speed grinding system for printer heads constructed by combination materials. International Journal of Advanced Manufacturing Technology, 25 (1-2), 1-9. doi: 10.1007/s00170-003-1866-9
Yin, L, Pickering, JP, Ramesh, K, Huang, H, Spowage, AC and Vancoille, EYJ (2005). Planar nanogrinding of a fine grained WC-Co composite for an optical surface finish. International Journal of Advanced Manufacturing Technology, 26 (7-8), 766-773. doi: 10.1007/s00170-004-2056-0
Yin, L, Huang, H and Chen, WK (2005). Influences of nanoscale abrasive suspensions on the polishing of fiber-optic connectors. International Journal of Advanced Manufacturing Technology, 25 (7-8), 685-690. doi: 10.1007/s00170-003-1887-4
Jung, YG, Lawn, BR, Martyniuk, M, Huang, H and Hu, XZ (2004). Evaluation of elastic modulus and hardness of thin films by nanoindentation. Journal of Materials Research, 19 (10), 3076-3080. doi: 10.1557/JMR.2004.0380
Huang, H (2004). A study of high-speed milling characteristics of nitinol. Materials And Manufacturing Processes, 19 (2), 159-175. doi: 10.1081/AMP-120029849
Yin, L, Vancoille, EYJ, Ramesh, K and Huang, H (2004). Surface characterization of 6H-SiC (0001) substrates in indentation and abrasive machining. International Journal of Machine Tools & Manufacture, 44 (6), 607-615. doi: 10.1016/j.ijmachtools.2003.12.006
Yin, L and Huang, H (2004). Grindability of glass-inlaid zirconia for fibre-optic connectors. Proceedings of The Institution of Mechanical Engineers Part B-journal of Engineering Manufacture, 218 (12), 1861-1868. doi: 10.1177/095440540421801218
Huang, H., Yin, L., Chen, W.K. and Xiong, Z. (2004). Ultraprecision abrasive machining of fibre optic connectors. Key Engineering Materials, 257-258, 171-176. doi: 10.4028/www.scientific.net/KEM.257-258.171
Chen, W. K., Kuriyagawa, T., Huang, H., Ono, H., Saeki, M. and Syoji, K. (2004). A novel form error compensation technique for tungsten carbide mould insert machining utilizing parallel grinding technology. Key Engineering Materials, 257-258, 141-146. doi: 10.4028/www.scientific.net/KEM.257-258.141
Ramesh, K, Huang, H and Yin, L (2004). Analytical and experimental investigation of coolant velocity in high speed grinding. International Journal of Machine Tools & Manufacture, 44 (10), 1069-1076. doi: 10.1016/j.ijmachtools.2004.02.017
Yin, L and Huang, H (2004). Ceramic response to high speed grinding. Machining Science And Technology, 8 (1), 21-37. doi: 10.1081/MST-120034240
Yin, L, Vancoille, EYJ, Ramesh, K, Huang, H, Pickering, JP and Spowage, AC (2004). Ultraprecision grinding of tungsten carbide for spherical mirrors. Proceedings of The Institution of Mechanical Engineers Part B-journal of Engineering Manufacture, 218 (4), 419-429. doi: 10.1243/095440504323055533
Huang, H, Zheng, HY and Lim, GC (2004). Femtosecond laser machining characteristics of Nitinol. Applied Surface Science, 228 (1-4), 201-206. doi: 10.1016/j.apsusc.2004.01.018
Ramesh, K, Huang, H, Yin, L and Yui, A (2004). Surface waviness controlled grinding of thin mold inserts using chilled air as coolant. Materials And Manufacturing Processes, 19 (2), 341-354. doi: 10.1081/AMP-120029959
Yin, L, Spowage, AC, Ramesh, K, Huang, H, Pickering, JP and Vancoille, EYJ (2004). Influence of microstructure on ultraprecision grinding of cemented carbides. International Journal of Machine Tools & Manufacture, 44 (5), 533-543. doi: 10.1016/j.ijmachtools.2003.10.022
Ramesh, K, Huang, H, Yin, L and Zhao, J (2004). Microgrinding of deep micro grooves with high table reversal speed. International Journal of Machine Tools & Manufacture, 44 (1), 39-49. doi: 10.1016/j.ijmachtools.2003.08.012
Huang, H., Chen, W. K., Yin, L., Xiong, Z., Liu, Y. C. and Teo, P. L. (2004). Micro/meso ultra precision grinding of fibre optic connectors. Precision Engineering-journal of The International Societies For Precision Engineering And Nanotechnology, 28 (1), 95-105. doi: 10.1016/j.precisioneng.2003.08.001
Yin, L, Vancoille, EYJ, Lee, LC, Huang, H, Ramesh, K and Liu, XD (2004). High-quality grinding of polycrystalline silicon carbide spherical surfaces. Wear, 256 (1-2), 197-207. doi: 10.1016/S0043-1648(03)00406-X
Han, Huang and Ramesh, K. (2003). The effects of grinding wheel speed on Burr creation and surface quality. Metal Finishing, 101 (7-8), 57-61. doi: 10.1016/S0026-0576(03)90204-2
Huang, H, Yin, L and Zhou, LB (2003). High speed grinding of silicon nitride with resin bond diamond wheels. Journal of Materials Processing Technology, 141 (3), 329-336. doi: 10.1016/S0924-0136(03)00284-X
Zheng, H. Y., Zareena, A. R., Huang, H. and Lim, G. C. (2003). Studies of femtosecond laser-processed nitinol. Materials Science Forum, 437-438, 277-280. doi: 10.4028/www.scientific.net/MSF.437-438.277
Huang, H., Zhang, H., Zhou, L. and Zheng, H. Y. (2003). Ultrasonic vibration assisted electro-discharge machining of microholes in Nitinol. Journal of Micromechanics And Microengineering, 13 (5), 693-700. doi: 10.1088/0960-1317/13/5/322
Chen, WK and Huang, H (2003). Ultra precision grinding of spherical convex surfaces on combination brittle materials using resin and metal bond cup wheels. Journal of Materials Processing Technology, 140 (1-3), 217-223. doi: 10.1016/S0924-0136(03)00788-X
Yin, L., Vancoille, E. Y. J., Lee, L. C., Liu, Y. C., Huang, H. and Ramesh, K. (2003). High-precision low-damage grinding of polycrystalline SIC. Key Engineering Materials, 238-2, 59-64. doi: 10.4028/www.scientific.net/KEM.238-239.59
Huang, H. and Liu, Y. C. (2003). Experimental investigations of machining characteristics and removal mechanisms of advanced ceramics in high speed deep grinding. International Journal of Machine Tools & Manufacture, 43 (8), 811-823. doi: 10.1016/S0890-6955(03)00050-6
Huang, H, Gong, ZM, Chen, XQ and Zhou, L (2003). SMART robotic system for 3D profile turbine vane airfoil repair. International Journal of Advanced Manufacturing Technology, 21 (4), 275-283. doi: 10.1007/s001700300032
Ramesh, K, Yeo, SH, Zhong, ZW and Huang, H (2003). Ecological grinding with chilled air as coolant. Proceedings of The Institution of Mechanical Engineers Part B-journal of Engineering Manufacture, 217 (3), 409-419. doi: 10.1243/095440503321590569
Huang, Han (2003). Machining characteristics and surface integrity of yttria stabilized tetragonal zirconia in high speed deep grinding. Materials Science and Engineering A, 345 (1-2), 155-163. doi: 10.1016/S0921-5093(02)00466-5
Ravi, N and Huang, H (2002). Fabrication of symmetrical section microfeatures using the electro-discharge machining block electrode method. Journal of Micromechanics And Microengineering, 12 (6), 905-910. doi: 10.1088/0960-1317/12/6/322
Huang, H, Gong, ZM, Chen, XQ and Zhou, L (2002). Robotic grinding and polishing for turbine-vane overhaul. Journal of Materials Processing Technology, 127 (2), 140-145. doi: 10.1016/S0924-0136(02)00114-0
Zhou, L and Huang, H (2002). An automated robotic system for jet engine overhaul. system design and development for honeycomb repair. International Journal of Advanced Manufacturing Technology, 19 (5), 370-376. doi: 10.1007/s001700200026
Huang, H (2001). Effects of truing/dressing intensity on truing/dressing efficiency and grinding performance of vitrified diamond wheels. Journal of Materials Processing Technology, 117 (1-2), 9-14. doi: 10.1016/S0924-0136(01)01004-4
# 周 立波 (Zhou, Libo), Huang, Han, # 清水 淳 (Shimizu, Jun) and # 江田 弘 (Eda, Hiroshi) (2000). Automatic robotic system for jet engine overhaul: Process development and enhancement for honeycomb repair. 精密工学会誌 (Seimitsu Kogakkaishi) [Journal of the Japan Society for Precision Engineering], 66 (12), 1895-1900.
Chen, X. Q., Gong, Z. M., Huang, H., Ge, S. S. and Zhu, Q. (1999). Development of SMART 3D polishing system. Industrial Automation Journal, 8 (2), 6-11.
Ming, RS, Pan, J, Norton, MP, Wende, S and Huang, H (1999). The sound-field characterisation of a power transformer. Applied Acoustics, 56 (4), 257-272. doi: 10.1016/S0003-682X(98)00036-X
Huang, H, Dallimore, MP, Pan, J and McCormick, PG (1998). An investigation of the effect of powder on the impact characteristics between a ball and a plate using free falling experiments. Materials Science And Engineering A-structural Materials Properties Microstructure And Processing, 241 (1-2), 38-47. doi: 10.1016/S0921-5093(97)00470-X
Huang, H and Bush, MB (1997). Finite element analysis of mechanical properties in discontinuously reinforced metal matrix composites with ultrafine microstructure. Materials Science And Engineering A-structural Materials Properties Microstructure And Processing, 232 (1-3), 63-72. doi: 10.1016/S0921-5093(97)00092-0
Huang, H, Pan, J and McCormick, PG (1997). On the dynamics of mechanical milling in a vibratory mill. Materials Science And Engineering A-structural Materials Properties Microstructure And Processing, 232 (1-2), 55-62. doi: 10.1016/S0921-5093(97)00084-1
Huang, H and McCormick, PG (1997). Effect of milling conditions on the synthesis of chromium carbides by mechanical alloying. Journal of Alloys And Compounds, 256 (1-2), 258-262. doi: 10.1016/S0925-8388(96)03010-1
Huang, H, Pan, J and McCormick, PG (1997). Prediction of impact forces in a vibratory ball mill using an inverse technique. International Journal of Impact Engineering, 19 (2), 117-126. doi: 10.1016/S0734-743X(96)00018-8
Huang, H, Bush, MB and Fisher, GV (1997). A numerical study of effect of grain boundaries on elastic and plastic properties in nanocomposite materials. Cmmc 96 - Proceedings of The First International Conference On Ceramic And Metal Matrix Composites, Pts 1 And 2, 127-, 1191-1198.
Huang, H., Ding, J. and McCormick, P. G. (1996). Microstructural evolutionof 304 stainless steel during mechanical milling. Materials Science and Engineering A - Structural Materials Properties Microstructure And Processing, 216 (1-2), 178-184. doi: 10.1016/0921-5093(96)10412-3
Huang, H., Zhu, X. H., Huang, Q. K. and Hu, X. Z. (1995). Weibull Strength Distributions and Fracture Characteristics of Abrasive Materials. Engineering Fracture Mechanics, 52 (1), 15-24. doi: 10.1016/0013-7944(95)00010-S
Ding, J., Huang, H., McCormick, P. G. and Street, R. (1995). Magnetic properties of martensite-austenite mixtures in mechanically milled 304 stainless steel. Journal of Magnetism and Magnetic Materials, 139 (1-2), 109-114. doi: 10.1016/0304-8853(94)00458-7
Huang, Han, Huang, Q., Zhu, X. H. and Hu, X. Z. (1993). An experimental investigation of the strength of individual brown corundum abrasive grains. Scripta Metallurgica et Materialia, 29 (3), 299-304. doi: 10.1016/0956-716X(93)90503-K
Conference Papers
Zimmermann, Soren and Huang, Han (2019). Investigating the effects of electron beam irradiation on nanoscale adhesion. 14th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS), Bangkok, Thailand, 11-14 April 2019. Piscataway, NJ, United States: Institute of Electrical and Electronics Engineers. doi: 10.1109/NEMS.2019.8915597
Wu, Hui, Zhao, Jingwei, Cheng, Xiawei, Xia, Wenzhen, He, Anshun, Yun, Jung-Ho, Wang, Lianzhou, Huang, Han, Jiao, Sihai and Jiang, Zhengyi (2017). Tribological behaviour of water-based nanolubricant containing TiO2 nanoparticles on ferritic stainless steel. International Symposium on Advances in Abrasive Technology, Okinawa, Japan, 3-6 December 2017. ISAAT.
Wang, Shiliang, Hou, Lizhen and Huang, Han (2014). Novel methods for characterising the mechanical properties of nanowhiskers. Conference on Optoelectronic and Microelectronic Materials and Devices, Perth, WA, Australia, 14-17 December 2014. Perth, WA, Australia: Institute of Electrical and Electronic Engineers. doi: 10.1109/COMMAD.2014.7038691
Kang, Chengwei, Hao, Bingjun and Huang, Han (2014). A preliminary study of surface integrity and wheel wear in the grinding of multilayered thin film structures. 17th International Symposium on Advances in Abrasive Technology (ISAAT 2014), Hawaii, United States, 22-25 September 2014. Pfaffikon, Switzerland: Scientific.Net. doi: 10.4028/www.scientific.net/AMR.1017.88
Kang, Chengwei and Huang, Han (2014). Deformation and removal characteristics of multilayered thin film structures in nanoscratching and diamond lapping. 17th International Symposium on Advances in Abrasive Technology (ISAAT 2014), Hawaii, United States, 2-25 September 2014. Pfaffikon, Switzerland: Scientific.Net. doi: 10.4028/www.scientific.net/AMR.1017.61
Shao, W., Li, X. S., Sun, Y. and Huang, H. (2014). Laboratory comparison of SMART*CUT picks with WC picks. 17th International Symposium on Advances in Abrasive Technology (ISAAT 2014), Hawaii, United States, 22-25 September 2014. Pfaffikon, Switzerland: Scientific.Net. doi: 10.4028/www.scientific.net/AMR.1017.323
Chen, Y. H., Huang, H., Lu, M. Y., Wu, Y. Q., Fang, F. Z. and Hu, X. T. (2014). Molecular dynamics simulation of the deformation of single crystal gallium arsenide. 1st Australasian Conference on Computational Mechanics (ACCM2013), Sydney, Australia, 3-4 October 2013. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/AMM.553.60
Shao, W., Li, X.S., Sun, Y. and Huang, H. (2014). Linear rock cutting with SMART*CUT picks. International Conference on Applied Mechanics and Materials, Zhuhai, China, 23-14 November 2013. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/AMM.477-478.1378
Huang, Han, He, Anshun, Kang, Chengwei, Zhang, Yuxing, Chen, Fengjun, Huang, Hui, Yin, Shaohui, Xu, Xipeng and He, Yuehui (2013). Machining characteristics of multilayered thin film solar panels in diamond wire sawing and grinding. 16th International Symposium on Advances in Abrasive Technology (ISAAT 2013), Hangzhou, China, 23-26 September 2013. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/AMR.797.85
Kang, Chengwei and Huang, Han (2013). A study of mechanical properties and material removal of polycrystalline tungsten via nanoindentation and nanoscratch. 16th International Symposium on Advances in Abrasive Technology (ISAAT 2013), Hangzhou, China, 23-26 September 2013. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/AMR.797.706
Liu, S., Huang, H. and Gu, Y. T. (2012). Hardness of silicon nitride thin films characterised by the nanoindentation and nanoscratch deconvolution methods. W Yorks, United Kingdom: Maney Publishing. doi: 10.1179/1743284712Y.0000000005
He, Anshun, Huang, Han and Zhou, Li Bo (2012). Mechanical properties and deformation of LiTaO3 single crystals characterised by nanoindentation and nanoscratch. 15th International Symposium on Advances in Abrasive Technology (ISAAT2012), Singapore, 25-28 September 2012. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/AMR.565.564
Huang, Han, Xie, Hongtao, He, Anshun and Lu, Mingyuan (2012). Mechanics and technologies for machining nanostructured thin film bilayers and multilayers. 3rd International Conference on nanoManufacturing (nanoMan2012), Tokyo, Japan, 25-27 July 2012. Tokyo, Japan: JSNM/ISNM.
Huang, Han (2012). A grinding protocol for the fabrication of micro/meso aspheric moulds for optic applications. 15th International Symposium on Advances in Abrasive Technology (ISAAT2012), Singapore Singapore, 25-28 September 2012. Stafa-Zurich, Switzerland: Trans Tech Publications Ltd.. doi: 10.4028/www.scientific.net/AMR.565.111
Mu, Dekui, Huang, Han and Nogita, Kazuhiro (2012). Effect of temperature on the mechanical properties of Cu6Sn5 and (Cu,Ni)6Sn5. TMS 2012 141st Annual Meeting and Exhibition, Orlando, United States, 11-15 March 2012.
Huang, Han (2011). Deformation mechanisms and abrasive machining of nanoscale thin film multilayered solar panels: A focused review. 14th International Symposium on Advances in Abrasive Technology (ISAAT 2011), Stuttgart, Germany, 18-21 September 2011. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/AMR.325.42
Crichton, Michael L., Raphael, Anthony P., Chen, Xianfeng, Donose, Bogdan C., Huang, Han and Kendall, Mark A. F. (2011). The mechanical properties of freshly excised skin layers and their relevance to micro-medical device design. Skin Vaccination Summit 2011, Washington DC, USA, 12-14 October 2011.
Sumitomo, Taro, Zhou, Li Bo and Huang, Han (2010). Grinding and polishing of nanolayered structures: thin film amorphous silicon solar panels. Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/AMR.126-128.817
Lin, Chih Ling, Huang, Han, Cribb, Bronwen W. and Russell, Anthony (2010). A study of mechanical properties of human femoral heads using nanoindentation. Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/AMR.126-128.957
Shimizu, Jun, Zhou, Li Bo, Takamori, Kaoru, Ojima, Hirotaka, Yamamoto, Takeyuki and Huang, Han (2010). Enhancement of photocatalytic reaction of titanium dioxide film by surface texturing. 7th Pacific Rim International Conference on Advanced Materials and Processing, PRICM-7, Cairns, QLD, Australia, 2-6 August 2010. Stafa-Zurich ; United Kingdom: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.654-656.1784
Mu, Dekui, Tsukamoto, Hideaki, Huang, Han and Nogita, Kazuhiro (2010). Formation and mechanical properties of intermetallic compounds in Sn-Cu high-temperature lead-free solder joints. 7th Pacific Rim International Conference on Advanced Materials and Processing, PRICM-7, Cairns, QLD, Australia, 2-6 August, 2010. Stafa-Zurich ; United Kingdom: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.654-656.2450
Zhang, Zhenyu, Irwan, Rudy and Huang, Han (2010). Machined surface characteristics and removal mechanism of soft and brittle solids. International Conference on Precision Engineering (ICoPE2010 and 13th ICPE), Singapore, Republic of Singapore, 28-30 July 2010. Aedermannsdorf, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/KEM.447-448.183
Irwan, Rudy and Huang, Han (2010). Removal and fracture characteristics of cemented tungsten carbide under nanoindenting and nanoscratching. International Conference on Precision Engineering (ICoPE2010 and 13th ICPE), Singapore, Republic of Singapore, 28-30 July 2010. Aedermannsdorf, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/KEM.447-448.16
Sumitomo, Taro, Huang, Han and Zhou, Libo (2010). Ductile regime deformation and material removal in nanoscale multilayers of thin film amorphous silicon solar cells. HPC 2010: 4th CIRP International Conference on High Performance Cutting, Gifu, Japan, 24 -26 October 2010. Gifu, Japan: CIRP.
Crichton, Michael, Donose, Bogdan, Chen, Xianfeng, Huang, Han and Kendall, Mark (2010). Determining Sub-cellular Scale Elastic Moduli within Individual Skin Layers using AFM Indentation; and Their Importance for Targeted Drug Delivery. 6th World Congress of Biomechanics, Singapore, 1-6 August 2010.
Tsukamoto, Hideaki, Dong, Zigang, Huang, Han, Nishimura, Tetsuro and Nogita, Kazuhiro (2010). Nanoindentation characterization of intermetallics formed at the lead-free solder/Cu substrate interface. Pacific Rim International Conference on Advanced Materials and Processing, Cairns, Australia, 2-6 August, 2010. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.654-656.2446
Shimizu, Jun, Zhou, Li Bo, Yamamoto, Takeyuki and Huang, Han (2010). Molecular dynamics simulation of rubbing phenomena in ultra-precision abrasive machining. 9th Asia-Pacific Conference on Materials Processing, Sydney, NSW, Australia, 7-10 June 2010. Aedermannsdorf, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/KEM.443.417
Yin, Ling and Huang, Han (2008). Surface topography in mechanical polishing of 6H-SiC (0001) substrate. Microelectronics: Design, Technology, and Packaging III, , , December 5, 2007-December 7, 2007. doi: 10.1117/12.758612
Huang, H., Wang, B. L., Wang, Y., Wu, Y. Q., Zhou, L. and Zou, J. (2008). Direct evidence of a nanosized high pressure phase of silicon during nanogrinding. International Conference On Nanoscience and Nanotechnology (ICONN 2008), Melbourne, Australia, 25-29 February 2008.
Wu, Y., Huang, H, and Zou, J, (2008). Deformation of monocrystalline silicon under nanoscratching. Switzerland: Trans Tech Publications Ltd..
Tsukamoto, H., Dong, Z., Huang, H., Nishimura, T. and Nogita, K. (2008). Nanoindentation characterization of intermetallic compounds formed at Sn-Cu (-Ni) solder/Cu substrate interfaces. Materials and AustCeram Conference (MAC 2009), Gold Coast, Queensland, 1-3 July 2009.
Huang, H., Liu, S., Dell, J.M. and Farone, L. (2007). Mechanical characteristics of filter structures for MEMS adaptive infrared detectors. Microelectronics, MEMS, and Nanotechnology 2007, Canberra, Australia, 5-7 December 2007. Bellingham, WA, United States: SPIE - International Society for Optical Engineering. doi: 10.1117/12.758816
Irwan, R. and Huang, H. (2007). Mechanical properties and removal characteristic of cemented tungsten carbide with fine microstructure studied by nanoindentation and nanoscratch. 5th Australasian Congress on Applied Mechanics (ACAM 2007), Brisbane, Australia, 10-12 December, 2007. Brisbane, Australia: Engineers Australia.
Wang, B., Huang, H., Zou, J. and Zhou, L. (2007). Nanomechanical properties and nanostructure of CMG and CMP machined Si substrates. 8th International Symposium on Measurement Technolgy and Intelligent Instruments, Sendai, Japan, 24-27 September 2007. Japan: Tohoku University.
Yin, L. and Huang, H. (2007). Surface Topgraphy in mechanical polishing of 6H-SiC (0001) substrate. Microelectronics, MEMS, and Nanotechnology 2007, Canberra, Australia, 5-7 December 2007. Australia: Society of Photo-Optical Instrumentation Engineers (SPIE).
Huang, H., Suvorova, A., Winchester, K. J., Dell, J. M. and Faraone, L. (2006). Characteristics of low temperature PECVD silicon nitride for MEMS structural materials. Singapore: World Scientific Publishing Co. Pty. Ltd. doi: 10.1142/S0217979206040398
Huang, Han and Kuriyagawa, T. (2006). Microgrinding aspherical mould inserts off tungsten carbide. 15th International Symposium on Processing and Fabrication of Advanced Materials, Cincinnati OH, 15-19 Oct 2006. Materials Park, Ohio, USA: ASM Internat..
Huang, H., Wu, Q., Winchester, K. J., Suvorova, A., Dell, J. M., Zou, J. and Faraone, L. (2006). Structural materials for NEMS/MEMS devices. 2006 International Conference on Nonoscience and Nanotechnology (ICONN '06), Brisbane, Australia, 3-7 July 2006. Piscataway, NJ, United States: IEEE. doi: 10.1109/ICONN.2006.340717
Yin, Ling and Huang, Han (2006). Material response to micro/nano abrasive processes for optical mirrors. Optical Fabrication and Testing 2006, Rochester, NY, United States, 9–11 October 2006. Washington, D.C.: Optical Society of America. doi: 10.1364/OFT.2006.OFME1
Huang, H., Liu, Y., Hu, X. Z., Bush, M. B., Winchester, K. J., Musca, C. A., Dell, J. M. and Faraone, L. (2005). Mechanical design and finite element analysis of tunable Fabry-Perot MEMS structures for adaptive infrared detectors. Conference on Optoelectronic and Microelectronic Materials and Devices, Brisbane, QLD, Australia, 8-10 December 2004. Piscataway, NJ, United States: IEEE. doi: 10.1109/COMMAD.2004.1577527
Martyniuk, Mariusz, Antoszewski, Jarek, Walmsley, Byron A., Musca, Charles A., Dell, John M., Jung, Yeon-Gil, Lawn, Brian R., Huang, Han and Faraone, Lorenzo (2005). Determination of mechanical properties of silicon nitride thin films using nanoindentation. Spaceborne Sensors II, Orlando, FL United States, 28 - 29 March 2005. Bellingham, WA United States: SPIE - International Society for Optical Engineering. doi: 10.1117/12.604245
Huang, H. and Kuriyagawa, T. (2005). Effect of microstructure on material removal mechanisms in nano/micro grinding of tungsten carbide mould inserts. The Third International Conference on Leading Edge Manufacturing in 21st Century, Nagoya, Japan, 18-22 October 2005. Nagoya, Japan: Japan Society of Mechanical Engineers.
Huang, H., Winchester, K., Antoszewski, J., Nguyun, T., Martyniuk, M., Walmsley, B., Liu, Yinong, Hu, X. Z., Musca, C. A., Dell, J. M. and Faraone, L. (2004). Evaluation Of Elastic Modulus And Stress Gradient Of PECVD Silicon Nitride Thin Films. Structural Integrity and Fracture International Conference (SIF'04), Brisbane, Australia, 26-29 September 2004.
Wong, Y. S., Rahman, M., Lim, H. S., Huang, H. and Ravi, N. (2003). Investigation of micro-EDM material removal characteristics using single RC-pulse discharges. 6th Asia Pacific Conference on Materials Processing, Taipei, Taiwan, 22-25 September 2003. Amsterdam ; New York: Elsevier. doi: 10.1016/S0924-0136(03)00771-4
Data Collection
Wang, Shiliang, Hou, Lizhen, Xie, Hongtao and Huang, Han (2015). High resolution optical images. The University of Queensland. (Dataset) doi: 10.14264/uql.2016.1151