Dr Jeff Chang
Postdoctoral Research Fellow
School of Mechanical and Mining Engineering
+61 7 336 53669
Publications
Journal Articles
Tan, Qiyang, Zheng, Zhong, Chang, Haiwei, Ly, Anh, Li, Erlei, Yao, Ju, Sun, Zhiyan, Knibbe, Ruth and Zhang, Ming-Xing (2026). Achieving architectured microstructures in plain carbon steel through programmed phase transformation using additive manufacturing. Additive Manufacturing 105175. doi: 10.1016/j.addma.2026.105175
Nguyen, Cuong, Liu, Yingang, Tieu, Anh Kiet, Chang, Haiwei, Nguyen, Xuan Thang, Deng, Guanyu, Zhang, Mingxing, Li, Huijun and Su, Lihong (2026). Investigation of friction and wear performance of laser additively manufactured AlCrFeNiMo high entropy alloy coating at temperatures from RT to 900 °C. Intermetallics, 189 109136, 1-16. doi: 10.1016/j.intermet.2025.109136
Yin, Yu, Chen, Hansheng, Deng, Guanyu, Su, Lihong, Wu, Wenxuan, Yan, Ming, Dong, Yangping, Xu, Xin, Deng, Zhikai, Tan, Qiyang, Chang, Haiwei, Guo, Chuan, Li, Huijun, Ringer, Simon, Huang, Han and Zhang, Mingxing (2025). A self-optimized alloy with multi-scale hierarchical microstructure and enhanced mechanical properties. Materials and Design, 250 113620, 1-9. doi: 10.1016/j.matdes.2025.113620
Tan, Qiyang, Chang, Haiwei, Liang, Guofang, Luzin, Vladimir, Yin, Yu, Wang, Fanshuo, Cheng, Xing, Yan, Ming, Zhu, Qiang, Hutchinson, Christopher and Zhang, Ming-Xing (2024). High performance plain carbon steels obtained through 3D-printing. Nature Communications, 15 (1) 10077, 1-11. doi: 10.1038/s41467-024-54507-4
Tan, Qiyang, Chang, Haiwei, Lindwall, Greta, Li, Erlei, Durga, A., Liang, Guofang, Yin, Yu, Wang, Geoff and Zhang, Ming-Xing (2023). Unravelling the roles of TiN-nanoparticle inoculant in additively manufactured 316 stainless steel. Journal of Materials Science & Technology, 175, 153-169. doi: 10.1016/j.jmst.2023.08.018
Huang, Danni, Zhou, Yinghao, Yao, Xiyu, Tan, Qiyang, Chang, Haiwei, Wang, Dawei, Lu, Songhe, Liu, Shiyang, Xu, Jingyuan, Jin, Shenbao, Sha, Gang, Huang, Han, Yan, Ming and Zhang, Ming-Xing (2022). From crack-prone to crack-free: unravelling the roles of LaB6 in a β-solidifying TiAl alloy fabricated with laser additive manufacturing. Materials Science and Engineering: A, 861 144358, 1-14. doi: 10.1016/j.msea.2022.144358
Tan, Qiyang, Chang, Haiwei, Yin, Yu, Wang, Feng, Huang, Danni, Liang, Guofang, Wu, Tao, Yan, Ming, Cheng, Xing and Zhang, Ming-Xing (2022). Simultaneous enhancements of strength and ductility of a selective laser melted H13 steel through inoculation treatment. Scripta Materialia, 219 114874, 114874. doi: 10.1016/j.scriptamat.2022.114874
Jain, Abhi-Shek, Mustafa, Muhammad Ikhmal, Sazili, Mohd Izzat Iskandar Mohd, Chang, Haiwei and Zhang, Ming-Xing (2022). Effects of destabilization and tempering on microstructure and mechanical properties of a hypereutectic high-chromium cast iron. Journal of Materials Science, 57 (32), 15581-15597. doi: 10.1007/s10853-022-07583-0
Tan, Qiyang, Yin, Yu, Wang, Feng, Chang, Haiwei, Liu, Shiyang, Liang, Guofang, Wu, Tao and Zhang, Ming-Xing (2022). Rationalization of brittleness and anisotropic mechanical properties of H13 steel fabricated by selective laser melting. Scripta Materialia, 214 114645, 114645. doi: 10.1016/j.scriptamat.2022.114645
Jain, Abhi-Shek, Chang, Haiwei, Ahmad, Haseeb, Ma, Xiaodong and Zhang, Ming-Xing (2022). Effect of solutes on the formation of primary carbides during solidification of hypereutectic high chromium cast irons through thermodynamic modeling. Journal of Materials Science, 57 (2), 1429-1447. doi: 10.1007/s10853-021-06623-5
Jain, Abhi-Shek, Chang, Haiwei and Zhang, Ming-Xing (2021). Effect of TiB2 addition on microstructure and mechanical properties of a hypereutectic high chromium cast iron. Journal of Materials Science, 56 (34), 19047-19059. doi: 10.1007/s10853-021-06429-5
Jain, Abhi-Shek, Chang, Haiwei, Tang, Xinhu, Hinckley, Brook and Zhang, Ming-Xing (2020). Refinement of primary carbides in hypereutectic high-chromium cast irons: a review. Journal of Materials Science, 56 (2), 999-1038. doi: 10.1007/s10853-020-05260-8
Chang, Haiwei, Lu, Mingyuan, Zhang, Mingxing, Atrens, Andrej and Huang, Han (2015). Strain rate dependence in the nanoindentation-induced deformation of Mg-Al intermetallic compounds produced by packed powder diffusion coating. Metals and Materials International, 21 (5), 793-798. doi: 10.1007/s12540-015-5055-9
Chang, H. -W., Zhang, M. -X., Atrens, A. and Huang, H. (2014). Nanomechanical properties of Mg–Al intermetallic compounds produced by packed powder diffusion coating (PPDC) on the surface of AZ91E. Journal of Alloys and Compounds, 587, 527-532. doi: 10.1016/j.jallcom.2013.10.235
Chang, H.-W., Qiu, D., Taylor, J. A., Easton, M. A. and Zhang, M.-X. (2013). The role of Al2Y in grain refinement in Mg-Al-Y alloy system . Journal of Magnesium and Alloys, 1 (2), 115-121. doi: 10.1016/j.jma.2013.07.006
Chang, H. W., Kelly, P. M., Shi, Y. N. and Zhang, M. X. (2012). Diffusion of Zn in nanostructured aluminum alloys produced by surface mechanical attrition treatment. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 43A (7), 2378-2389. doi: 10.1007/s11661-012-1112-x
Chang, H. W., Kelly, P. M., Shi, Y. N. and Zhang, M. X. (2012). Thermal stability of nanocrystallized surface produced by surface mechanical attrition treatment in aluminum alloys. Surface & Coatings Technology, 206 (19-20), 3970-3980. doi: 10.1016/j.surfcoat.2012.03.069
Chang, H. -W., Kelly, P. M., Shi, Y. -N. and Zhang, M. -X. (2011). Effect of eutectic Si on surface nanocrystallization of Al-Si alloys by surface mechanical attrition treatment. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 530 (1), 304-314. doi: 10.1016/j.msea.2011.09.090
Chang, H.W. and Zhang, M.X. (2009). Packed powder diffusion coating of pure aluminium after surface nanocrystallisation. INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING, 3 (1-2), 125-134. doi: 10.1504/IJSURFSE.2009.024366
Chen, T., Chang, H. W. and Lei, M. K. (2005). Prediction of intermetallics formation during metal ion implantation into Al at elevated temperature. Nuclear Instruments and Methods In Physics Research Section B: Beam Interactions with Materials And Atoms, 240 (3), 653-660. doi: 10.1016/j.nimb.2005.05.056
Chang, H. W. and Lei, M. K. (2005). Mass transfer of metal ion implantation into metal targets at elevated temperatures. Computational Materials Science, 33 (4), 459-466. doi: 10.1016/j.commatsci.2004.10.001
Chen, T. and Chang, H. W. (2005). Surface alloying of Al ion implantation into Fe target at elevated temperature. Acta Metallurgica Sinica (English Letters), 41 (4), 417-420.