School of Mechanical & Mining Engineering

Emeritus Professor David St John

Emeritus Professor
School of Mechanical and Mining Engineering

Publications

Book (1)
Book Chapters (12)
Journal Articles (248)
Conference Papers (148)
Thesis (1)

Book

Polmear, Ian, St John, David, Nie, Jian-Feng and Qian, Ma (2017). Light alloys: metallurgy of the light metals. 5th ed. Oxford, United Kingdom: Elsevier/Butterworth-Heinemann.

Book Chapters

Wang, Gui, Dargusch, Matthew, Easton, Mark and St John, David (2018). Treatment by external fields. Fundamentals of aluminium metallurgy. (pp. 279-332) edited by Roger N. Lumley. Duxford, United Kingdom: Elsevier. doi: 10.1016/b978-0-08-102063-0.00009-6
Song, Guangling, Atrens, Andrej and St John, David (2016). An hydrogen evolution method for the estimation of the corrosion rate of magnesium alloys. Essential readings in magnesium technology. (pp. 565-572) edited by Suveen N. Mathaudhu, Alan A. Luo, Neale R. Neelameggham, Eric A. Nyberg and Wim H. Sillekens. Cham, Switzerland: Springer. doi: 10.1007/978-3-319-48099-2_90
St John, D. H., Dahle, A. K., Abbott, T., Nave, M. D. and Qian, Ma (2016). Solidification of cast magnesium alloys. Essential readings in magnesium technology. (pp. 193-198) edited by Suveen N. Mathaudhu, Alan A. Luo, Neale R. Neelameggham, Eric A. Nyberg and Wim H. Sillekens. Cham, Switzerland: Springer. doi: 10.1007/978-3-319-48099-2_32
Lee, Y. C., Dahle, A. K. and St John, D. H. (2014). Grain refinement of magnesium. Essential readings in magnesium technology. (pp. 247-254) edited by Suveen N. Mathaudhu, Alan A. Luo, Neale R. Neelameggham, Eric A. Nyberg and Wim H. Sillekens. Hoboken, NJ, United States: Wiley Blackwell. doi: 10.1002/9781118859803.ch41
Easton M. A. and Stjohn D. H. (2013). The effect of alloy content on the grain refinement of aluminium alloys. Cast Shop for Aluminum Production. (pp. 393-399) edited by John F. Grandfield and Dmitry G. Eskin. Hoboken, NJ, USA: John Wiley & Sons. doi: 10.1002/9781118647783.ch48
Viano, David, Stjohn, David, Grandfield, John and Cáceres, Carlos (2013). Hot tearing in aluminium-copper alloys. Essential readings in light metals. (pp. 895-899) Hoboken, NJ USA: John Wiley and Sons. doi: 10.1002/9781118647783.ch112
Sweet, L., Easton, M. A., Taylor, J. A., Davidson, C. J., Lu, L., Couper, M. J. and St John, D. H. (2012). Hot tear susceptibility of Al-Mg-Si alloys with varying iron contents. Supplemental Proceedings: Materials Properties, Characterization, and Modeling, Volume 2 presented by the TMS Aluminum Committee at the TMS 2012 141st Annual Meeting & Exhibition, Orlando, Florida, USA, March 11-15, 2012. (pp. 275-282) edited by Minerals, Metals and Materials Society. Hoboken, NJ, USA: John Wiley & Sons. doi: 10.1002/9781118357002.ch36
Taylor, J. A., St John, D. H. and Easton, M. A. (2011). Case studies in aluminium casting alloys. Fundamentals of aluminium metallurgy: Production, processing and applications. (pp. 185-216) edited by Roger Lumley. Cambridge, United Kingdom: Woodhead Publishing.
Song, G. L. and StJohn, D. H. (2011). Corrosion of magnesium (Mg) alloys in engine coolants. Corrosion of magnesium alloys. (pp. 426-454) edited by Guang-Ling Song. Cambridge, United Kingdom: Woodhead Publishing.
Taylor, J. A., Stjohn, D. H. and Easton, M. A. (2010). Case studies in aluminium casting alloys. Fundamentals of Aluminium Metallurgy: Production, Processing and Applications. (pp. 185-216) Elsevier Ltd.. doi: 10.1533/9780857090256.1.185
Easton, M. A., Qian, Ma and StJohn, D. H. (2009). Grain refinement in alloys: Novel approaches. The Encyclopedia of Materials Science and Technology. (pp. x-x) edited by K.H. Jurgen Buschow. Amsterdam ; New York: Elsevier. doi: 10.1016/b978-0-12-803581-8.03789-9
Dahle, A. K. and St John, D. H. (2002). Processing via the Liquid State. Encyclopedia of Life Support Systems (ELOSS). (pp. 1-46) edited by Rees Rawlings. Oxford, United Kingdom: Eolss Publishers.

Journal Articles

Fan, Zhiqi, Tan, Qiyang, Yuan, Lang, Li, Xuliang, Yin, Yu, Niu, Pengda, Zhao, Yitian, Kang, Chengwei, Li, Ruidi, Yuan, Tiechui, StJohn, David H., Zhang, Ming-Xing and Huang, Han (2025). Solute-induced grain refinement for crack suppression in laser additive manufactured ceramics. Acta Materialia, 292 121069, 121069. doi: 10.1016/j.actamat.2025.121069
Wang, Jiale, Yin, Bo, Qin, Kai, Miao, Haohao, Yin, Yu, Pavlenko, Petro, Yuan, Yuefeng, Wang, Jinbao, StJohn, David Henry, Zhang, Zhao and Yi, Hao (2025). A new analytical model for process-microstructure-hardness relationships of directed energy deposited nickel alloys. Journal of Materials Research and Technology, 36, 3974-3987. doi: 10.1016/j.jmrt.2025.04.085
Xue, Chengpeng, Wang, Shuo, Wang, Junsheng, Yang, Xinghai, Li, Xingxing, Miao, Yisheng, Ke, Yubin, Tian, Ye, Li, Jingren and St John, David (2025). An ultrastrong multilayer core-shell nanostructure in aluminum-lithium castings. Nano Letters, 25 (11), 4636-4643. doi: 10.1021/acs.nanolett.4c06368
Xu, Shanshan, Yin, Bo, Wang, Jiale, Jin, Liquan, Yin, Yu, Li, Zhenhua, StJohn, David H., Pavlenko, Petro and Guo, Yueling (2025). Controlling the formation of microstructure at the melt-pool boundaries during directed energy deposition of aluminum alloy with a modified continuous growth restriction factor. Journal of Materials Research and Technology, 34, 2344-2357. doi: 10.1016/j.jmrt.2024.12.249
Tian, He, Qu, Dongdong, Setargew, Nega, Parker, Daniel J., Paterson, David J., StJohn, David and Nogita, Kazuhiro (2024). Characterisation of Fe distribution in the liquid–solid boundary of Al–Zn–Mg–Si alloy using synchrotron X-ray fluorescence microscopy. Materials, 17 (14) 3583, 1-17. doi: 10.3390/ma17143583
Tian, He, Qu, Dongdong, Tong, Zherui, Setargew, Nega, Parker, Daniel J., StJohn, David and Nogita, Kazuhiro (2024). Characterization of Solidification and Microstructure of an Al-Zn-Mg-Si Alloy. Corrosion Science and Technology, 23 (2), 104-112. doi: 10.14773/CST.2024.23.2.104
Xiao, Fei, Shu, Da, Wang, Yixiao, Sun, Qinyao, Wang, Donghong, Yang, Chao, Wang, Shubin, Mi, Jiawei, Sun, Baode and StJohn, David H. (2024). Tailoring hierarchical microstructures and nanoprecipitates in additive-manufactured Al-Zn-Mg-Cu-Nb alloys for simultaneously enhancing strength and ductility. Communications Materials, 5 (1) 52, 1-11. doi: 10.1038/s43246-024-00489-1
Zhang, Jingqi, Bermingham, Michael J., Otte, Joseph, Liu, Yingang, Hou, Ziyong, Yang, Nan, Yin, Yu, Bayat, Mohamad, Lin, Weikang, Huang, Xiaoxu, StJohn, David H. and Dargusch, Matthew S. (2024). Ultrauniform, strong, and ductile 3D-printed titanium alloy through bifunctional alloy design. Science, 383 (6683), 639-645. doi: 10.1126/science.adj0141
Yang, Bing, Wu, Jianchun, Zeng, Yu, Liu, Jinyan, Yang, Nan, McGuckin, Damian, Chhor, Allen, StJohn, David, Dargusch, Matthew and Wang, Gui (2024). Hot tear formation during the casting of Al–Zn binary alloys. Advanced Engineering Materials, 26 (2) 2301471, 1-9. doi: 10.1002/adem.202301471
Balasubramani, Nagasivamuni, Venezuela, Jeffrey, StJohn, David, Wang, Gui and Dargusch, Matthew (2023). A review of the origin of equiaxed grains during solidification under mechanical stirring, vibration, electromagnetic, electric-current, and ultrasonic treatments. Journal of Materials Science and Technology, 144, 243-265. doi: 10.1016/j.jmst.2022.09.067
Qu, Dongdong, Gear, Matthew, Gu, Qinfen, Setargew, Nega, Renshaw, Wayne, McDonald, Stuart, StJohn, David and Nogita, Kazuhiro (2023). Phase stability of dross particles in hot-dip Zn-55wt%Al-1.6wt%Si galvanizing bath. Materials, 16 (3) 1211, 1211. doi: 10.3390/ma16031211
Zhang, Yunhu, Wang, Junjie, Zhang, Jianlei, Xu, Yanyi, Ye, Chunyang, St John, D. H., Song, Changjiang, Zheng, Hongxing and Wang, Gui (2023). Evolutions of Electromagnetic Fields and Forced Flow Driven by the Pulse Length of a Pulsed Magnetic Field and Their Relevance to the Grain Refinement of a Solidified Al–Si Hypoeutectic Alloy. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 54 (6), 3180-3202. doi: 10.1007/s11663-023-02900-7
Tian, Guangyuan, Wang, Junsheng, Zhang, Chi, Wang, Shuo, Wang, Bing and StJohn, David (2022). Ultra-strong Mg alloy with nano-grain structures produced by a high-throughput magnetron co-sputtering method for the full chemistry spectra. Journal of Materials Science, 57 (47), 21813-21827. doi: 10.1007/s10853-022-07994-z
Balasubramani, Nagasivamuni, Venezuela, Jeffrey, Yang, Nan, Wang, Gui, StJohn, David and Dargusch, Matthew (2022). An overview and critical assessment of the mechanisms of microstructural refinement during ultrasonic solidification of metals. Ultrasonics Sonochemistry, 89 106151, 1-16. doi: 10.1016/j.ultsonch.2022.106151
Tong, Xin, Wu, Guohua, Easton, Mark A., Sun, Ming, StJohn, David H., Jiang, Rui and Qi, Fangzhou (2022). Exceptional grain refinement of Mg-Zr master alloy treated by tungsten inert gas arc re-melting with ultra-high frequency pulses. Scripta Materialia, 215 114700, 114700. doi: 10.1016/j.scriptamat.2022.114700
Xiao, Fei, Wang, Shubin, Wang, Yixiao, Shu, Da, Zhu, Guoliang, Sun, Baode and StJohn, David (2022). Niobium nanoparticle-enabled grain refinement of a crack-free high strength Al-Zn-Mg-Cu alloy manufactured by selective laser melting. Journal of Alloys and Compounds, 900 163427, 163427. doi: 10.1016/j.jallcom.2021.163427
Tan, Qiyang, Yin, Yu, Prasad, Arvind, Li, Gan, Zhu, Qiang, StJohn, David Henry and Zhang, Ming-Xing (2022). Demonstrating the roles of solute and nucleant in grain refinement of additively manufactured aluminium alloys. Additive Manufacturing, 49 102516, 102516. doi: 10.1016/j.addma.2021.102516
Mehreen, Syeda U., Nogita, Kazuhiro, McDonald, Stuart D., Yasuda, Hideyuki and StJohn, David H. (2021). Peritectic phase formation kinetics of directionally solidifying Sn-Cu alloys within a broad growth rate regime. Acta Materialia, 220 117295, 1-11. doi: 10.1016/j.actamat.2021.117295
Balasubramani, Nagasivamuni, Xu, Yanyi, Zhang, Yunhu, Zhai, Qijie, Wang, Gui, StJohn, David and Dargusch, Matthew (2021). Investigating the grain refinement mechanisms of pulsed electric current, ultrasonic and melt stirring solidification of pure aluminium. JOM, 73 (12), 3873-3882. doi: 10.1007/s11837-021-04904-7
Dieringa, Hajo, StJohn, David, Pérez Prado, María Teresa and Kainer, Karl Ulrich (2021). Latest developments in the field of magnesium alloys and their applications. Frontiers in Materials, 8 726297. doi: 10.3389/fmats.2021.726297
Balasubramani, Nagasivamuni, Wang, Gui, StJohn, David H. and Dargusch, Matthew S. (2021). Mechanisms of the origin of fine and non-dendritic grains at the sonotrode–liquid metal interface during ultrasonic solidification of metals. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 52 (6), 2676-2688. doi: 10.1007/s11661-021-06264-y
Jie, J.C., Yue, S.P., Liu, J., StJohn, D.H., Zhang, Y.B., Guo, E.Y., Wang, T.M. and Li, T.J. (2021). Revealing the mechanisms for the nucleation and formation of equiaxed grains in commercial purity aluminum by fluid-solid coupling induced by a pulsed magnetic field. Acta Materialia, 208 116747, 116747. doi: 10.1016/j.actamat.2021.116747
Balasubramani, Nagasivamuni, Wang, Gui, StJohn, David H. and Dargusch, Matthew S. (2021). Current understanding of the origin of equiaxed grains in pure metals during ultrasonic solidification and a comparison of grain formation processes with low frequency vibration, pulsed magnetic and electric-current pulse techniques. Journal of Materials Science and Technology, 65, 38-53. doi: 10.1016/j.jmst.2020.04.080
Mehreen, Syeda U., Nogita, Kazuhiro, McDonald, Stuart D., Yasuda, Hideyuki and StJohn, David H. (2021). Effect of Ni, Zn, Au, Sb and In on the suppression of the Cu3Sn phase in Sn-10 wt.%Cu Alloys. Journal of Electronic Materials, 50 (3), 881-892. doi: 10.1007/s11664-020-08709-3
Kim, Manjin, McDonald, Stuart D., Abbott, Trevor B., Easton, Mark A., Ali, Yahia, StJohn, David H. and Nogita, Kazuhiro (2020). A rational interpretation of solidification microstructures in the Mg-rich corner of the Mg–Al–La system. Journal of Alloys and Compounds, 844 156068, 156068. doi: 10.1016/j.jallcom.2020.156068
Zhang, Duyao, Qiu, Dong, Gibson, Mark A., Zheng, Yufeng, Fraser, Hamish L., Prasad, Arvind, StJohn, David H. and Easton, Mark A. (2020). Refining prior-β grains of Ti–6Al–4V alloy through yttrium addition. Journal of Alloys and Compounds, 841 155733, 155733. doi: 10.1016/j.jallcom.2020.155733
Dargusch, M. S., Hamasaiid, A., Dour, G., Balasubramani, N. and Stjohn, D. H. (2020). Correction to: The Influence of In-Cavity Pressure on Heat Transfer and Porosity Formation During High-Pressure Die Casting of A380 Alloy. JOM, 72 (11), 4148-4148. doi: 10.1007/s11837-020-04376-1
Dargusch, M. S., Hamasaaid, A., Dour, G., Balasubramani, N. and StJohn, D. H. (2020). The influence of in-cavity pressure on heat transfer and porosity formation during high-pressure die casting of A380 alloy. JOM, 72 (11), 3798-3805. doi: 10.1007/s11837-020-04341-y
Balasubramani, Nagasivamuni, Wang, Gui, Easton, Mark A., StJohn, David H. and Dargusch, Matthew S. (2020). A comparative study of the role of solute, potent particles and ultrasonic treatment during solidification of pure Mg, Mg–Zn and Mg–Zr alloys. Journal of Magnesium and Alloys, 9 (3), 829-839. doi: 10.1016/j.jma.2020.08.006
Prasad, Arvind, Yuan, Lang, Lee, Peter, Patel, Mitesh, Qiu, Dong, Easton, Mark and StJohn, David (2020). Towards understanding grain nucleation under additive manufacturing solidification conditions. Acta Materialia, 195, 392-403. doi: 10.1016/j.actamat.2020.05.012
Zhang, Duyao, Qiu, Dong, Zhu, Suming, Dargusch, Matthew, StJohn, David and Easton, Mark (2020). Grain refinement in laser remelted Mg-3Nd-1Gd-0.5Zr alloy. Scripta Materialia, 183, 12-16. doi: 10.1016/j.scriptamat.2020.03.006
Zhang, Duyao, Qiu, Dong, Gibson, Mark A., Zheng, Yufeng, Fraser, Hamish L., StJohn, David H. and Easton, Mark A. (2020). Author Correction: Additive manufacturing of ultrafine-grained high-strength titanium alloys (Nature, (2019), 576, 7785, (91-95), 10.1038/s41586-019-1783-1). Nature, 582 (7811), E5-E5. doi: 10.1038/s41586-020-2291-z
Qu, D.D., Gear, M., Setargew, N., Renshaw, W., McDonald, S., StJohn, D., Paterson, D.J. and Nogita, K. (2020). On the distribution of the trace elements V and Cr in an Al-Zn-Si alloy coating on a steel substrate. Materialia, 11 100669, 100669. doi: 10.1016/j.mtla.2020.100669
Tedman-Jones, S.N., Bermingham, M.J., McDonald, S.D., StJohn, D.H. and Dargusch, M.S. (2020). Titanium sponge as a source of native nuclei in titanium alloys. Journal of Alloys and Compounds, 818 153353, 153353. doi: 10.1016/j.jallcom.2019.153353
Dehghan-Manshadi, Ali, Yu, Peng, Dargusch, Matthew, StJohn, David and Qian, Ma (2020). Metal injection moulding of surgical tools, biomaterials and medical devices: a review. Powder Technology, 364, 189-204. doi: 10.1016/j.powtec.2020.01.073
Patel, M.N., Qiu, D., Wang, G., Gibson, M.A., Prasad, A., StJohn, D.H. and Easton, M.A. (2020). Understanding the refinement of grains in laser surface remelted Al–Cu alloys. Scripta Materialia, 178, 447-451. doi: 10.1016/j.scriptamat.2019.12.020
Dargusch, M.S., Balasubramani, N., Venezuela, J., Johnston, S., Wang, G., Lau, C., Bermingham, M., Kent, D. and StJohn, D.H. (2020). Improved biodegradable magnesium alloys through advanced solidification processing. Scripta Materialia, 177, 234-240. doi: 10.1016/j.scriptamat.2019.10.028
Todaro, C. J., Easton, M. A., Qiu, D., Zhang, D., Bermingham, M. J., Lui, E. W., Brandt, M., StJohn, D. H. and Qian, M. (2020). Grain structure control during metal 3D printing by high-intensity ultrasound. Nature Communications, 11 (1) 142, 142. doi: 10.1038/s41467-019-13874-z
Zhang, Y.H., Ye, C.Y., Shen, Y.P., Chang, W., StJohn, D.H., Wang, G. and Zhai, Q.J. (2020). Grain refinement of hypoeutectic Al-7wt.%Si alloy induced by an Al–V–B master alloy. Journal of Alloys and Compounds, 812 152022, 152022. doi: 10.1016/j.jallcom.2019.152022
Zhang, Duyao, Prasad, Arvind, Bermingham, Michael J., Todaro, Carmelo J., Benoit, Michael J., Patel, Mitesh N., Qiu, Dong, StJohn, David H., Qian, Ma and Easton, Mark A. (2020). Grain refinement of alloys in fusion-based additive manufacturing processes. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (9), 4341-4359. doi: 10.1007/s11661-020-05880-4
Todaro, C. J., Easton, M. A., Qiu, D., Brandt, M., StJohn, D. H. and Qian, M. (2020). Grain refinement of stainless steel in ultrasound-assisted additive manufacturing. Additive Manufacturing, 37 101632, 101632. doi: 10.1016/j.addma.2020.101632
Dehghan-Manshadi, Ali, Kent, Damon, StJohn, David and Dargusch, Matthew (2019). Properties of powder metallurgy-fabricated oxygen-containing beta Ti-Nb-Mo-Sn-Fe alloys for biomedical applications. Advanced Engineering Materials, 22 (3) 1901229, 1901229. doi: 10.1002/adem.201901229
Balasubramani, Nagasivamuni, Wang, Gui, StJohn, David H. and Dargusch, Matthew S. (2019). The poisoning effect of Al and Be on Mg—1 wt.% Zr alloy and the role of ultrasonic treatment on grain refinement. Frontiers in Materials, 6 322. doi: 10.3389/fmats.2019.00322
Zhang, Duyao, Qiu, Dong, Gibson, Mark A., Zheng, Yufeng, Fraser, Hamish L., StJohn, David H. and Easton, Mark A. (2019). Additive manufacturing of ultrafine-grained high-strength titanium alloys. Nature, 576 (7785), 91-95. doi: 10.1038/s41586-019-1783-1
Wang, Gui, Wang, Qiang, Balasubramani, Nagasivamuni, Qian, Ma, Eskin, Dmitry G., Dargusch, Matthew S. and Stjohn, David H. (2019). The role of ultrasonically induced acoustic streaming in developing fine equiaxed grains during the solidification of an Al-2 Pct Cu alloy. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 50A (11), 5253-5263. doi: 10.1007/s11661-019-05448-x
Sun, Ming, StJohn, David H., Easton, Mark A., Wang, Ke and Ni, Jiaming (2019). Effect of cooling rate on the grain refinement of Mg-Y-Zr alloys. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 51 (1), 482-496. doi: 10.1007/s11661-019-05497-2
Balasubramani, Nagasivamuni, StJohn, David, Dargusch, Matthew and Wang, Gui (2019). Ultrasonic processing for structure refinement: an overview of mechanisms and application of the interdependence theory. Materials, 12 (19) 3187, 3187. doi: 10.3390/ma12193187
Tedman-Jones, S. N., McDonald, S. D., Bermingham, M. J., StJohn, D. H. and Dargusch, M. S. (2019). A new approach to nuclei identification and grain refinement in titanium alloys. Journal of Alloys and Compounds, 794, 268-284. doi: 10.1016/j.jallcom.2019.04.224
Jia, Yiwang, Huang, Haijun, Fu, Yanan, Zhu, Guoliang, Shu, Da, Sun, Baode and StJohn, D. H. (2019). An in situ investigation of the solute suppressed nucleation zone in an Al-15 wt% Cu alloy inoculated by Al-Ti-B. Scripta Materialia, 167, 6-10. doi: 10.1016/j.scriptamat.2019.03.032
Dehghan-Manshadi, A., StJohn, D. H. and Dargusch, M. S. (2019). Tensile properties and fracture behaviour of biodegradable iron–manganese scaffolds produced by powder sintering. Materials, 12 (10) 1572, 1572. doi: 10.3390/ma12101572
Bermingham, M. J., StJohn, D. H., Krynen, J., Tedman-Jones, S. and Dargusch, M. S. (2019). Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing. Acta Materialia, 168, 261-274. doi: 10.1016/j.actamat.2019.02.020
Nagasivamuni, B., Wang, Gui, St John, David H. and Dargusch, Matthew S. (2019). Effect of ultrasonic treatment on the alloying and grain refinement efficiency of a Mg – Zr master alloy added to magnesium at hypo- and hyper-peritectic compositions. Journal of Crystal Growth, 512, 20-32. doi: 10.1016/j.jcrysgro.2019.02.004
Todaro, C.J., Easton, M.A., Qiu, D., Wang, G., StJohn, D.H. and Qian, M. (2019). Effect of ultrasonic melt treatment on intermetallic phase formation in a manganese-modified Al-17Si-2Fe alloy. Journal of Materials Processing Technology, 271, 346-356. doi: 10.1016/j.jmatprotec.2019.04.008
Tedman-Jones, S.N., McDonald, S.D., Bermingham, M.J., St John, D.H. and Dargusch, M.S. (2019). Investigating the morphological effects of solute on the β-phase in as-cast titanium alloys. Journal of Alloys and Compounds, 778, 204-214. doi: 10.1016/j.jallcom.2018.11.063
Sparshott, Paul John, Darchen, Sebastien and Stjohn, David (2019). Do sustainability rating tools deliver the best outcomes in master planned urban infill projects? City to the Lake experience. Australian Planner, 55 (2), 1-9. doi: 10.1080/07293682.2019.1569077
StJohn, David, McDonald, Stuart and Darlapudi, Anilajaram (2019). A new perspective on the nucleation, growth morphology and modification of the silicon phase during the formation of eutectic Al-Si grains. JOM, 71 (1), 391-396. doi: 10.1007/s11837-018-3124-5
Guo, Enyu, Kazantsev, Daniil, Mo, Jingyi, Bent, Julian, Van Dalen, Gerard, Schuetz, Peter, Rockett, Peter, StJohn, David and Lee, Peter D. (2018). Revealing the microstructural stability of a three-phase soft solid (ice cream) by 4D synchrotron X-ray tomography. Journal of Food Engineering, 237, 204-214. doi: 10.1016/j.jfoodeng.2018.05.027
Wang, Gui, Croaker, Paul, Dargusch, Matthew, McGuckin, Damian and StJohn, David (2018). Evolution of the as-cast grain microstructure of an ultrasonically treated Al–2Cu alloy. Advanced Engineering Materials, 20 (11) 1800521, 1800521. doi: 10.1002/adem.201800521
Mehreen, Syeda U., Nogita, Kazuhiro, McDonald, Stuart, Yasuda, Hideyuki and St John, David (2018). Suppression of Cu3Sn in the Sn-10Cu peritectic alloy by the addition of Ni. Journal of Alloys and Compounds, 766, 1003-1013. doi: 10.1016/j.jallcom.2018.06.251
Mills, Kurt, Wang, Gui, St John, David and Dargusch, Matthew (2018). Ultrasonic Processing of Aluminum–Magnesium Alloys. Materials, 11 (10) 1994, 1994. doi: 10.3390/ma11101994
Carluccio, D., Bermingham, M. J., Zhang, Y., StJohn, D. H., Yang, K., Rometsch, P. A., Wu, X. and Dargusch, M. S. (2018). Grain refinement of laser remelted Al-7Si and 6061 aluminium alloys with Tibor® and scandium additions. Journal of Manufacturing Processes, 35, 715-720. doi: 10.1016/j.jmapro.2018.08.030
Mereddy, S., Bermingham, M. J., Kent, D., Dehghan-Manshadi, A., Stjohn, D. H. and Dargusch, M. S. (2018). Trace carbon addition to refine microstructure and enhance properties of additive-manufactured Ti-6Al-4V. JOM, 70 (9), 1670-1676. doi: 10.1007/s11837-018-2994-x
Dehghan-Manshadi, Ali, Chen, Yunhui, Shi, Zhiming, Bermingham, Michael, StJohn, David, Dargusch, Matthew and Qian, Ma (2018). Porous titanium scaffolds fabricated by metal injection moulding for biomedical applications. Materials, 11 (9) 1573, 1573. doi: 10.3390/ma11091573
Bermingham, M. J., Thomson-Larkins, J., St John, D. H. and Dargusch, M. S. (2018). Sensitivity of Ti-6Al-4V components to oxidation during out of chamber Wire + Arc Additive Manufacturing. Journal of Materials Processing Technology, 258, 29-37. doi: 10.1016/j.jmatprotec.2018.03.014
Sun, Jie, Wang, Dingpu, Zhang, Yunhu, Sheng, Cheng, Dargusch, Matthew, Wang, Gui, St John, David and Zhai, Qijie (2018). Heterogeneous nucleation of pure Al on MgO single crystal substrate accompanied by a MgAl2O4 buffer layer. Journal of Alloys and Compounds, 753, 543-550. doi: 10.1016/j.jallcom.2018.04.263
Nagasivamuni, B., Wang, Gui, StJohn, David H. and Dargusch, Matthew S. (2018). The effect of ultrasonic treatment on the mechanisms of grain formation of as-cast high purity zinc. Journal of Crystal Growth, 495, 20-28. doi: 10.1016/j.jcrysgro.2018.05.006
Qiu, Dong, Zhang, Duyao, Easton, Mark A., St John, David H. and Gibson, Mark A. (2018). Refining As-cast β-Ti Grains Through ZrN Inoculation. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 49 (5), 1444-1449. doi: 10.1007/s11661-018-4531-5
Dehghan-Manshadi, A., St John, D., Dargusch, M., Chen, Y., Sun, J. F. and Qian, M. (2017). Metal injection moulding of non-spherical titanium powders: Processing, microstructure and mechanical properties. Journal of Manufacturing Processes, 31, 416-423. doi: 10.1016/j.jmapro.2017.12.004
Dieringa, Hajo, Katsarou, Lydia, Buzolin, Ricardo, Szakacs, Gabor, Horstmann, Manfred, Wolff, Martin, Mendis, Chamini, Vorozhtsov, Sergey and StJohn, David (2017). Ultrasound Assisted Casting of an AM60 Based Metal Matrix Nanocomposite, Its Properties, and Recyclability. Metals, 7 (10) 388, 388. doi: 10.3390/met7100388
Todaro, C. J., Easton, M. A., Qiu, D., Wang, G., St John, D. H. and Qian, M. (2017). The Effect of Ultrasonic Melt Treatment on Macro-Segregation and Peritectic Transformation in an Al-19Si-4Fe Alloy. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 48 (11), 5579-5590. doi: 10.1007/s11661-017-4325-1
Dehghan-Manshadi, A., Bermingham, M. J., Dargusch, M. S., StJohn, D. H. and Qian, M. (2017). Metal injection moulding of titanium and titanium alloys: challenges and recent development. Powder Technology, 319, 289-301. doi: 10.1016/j.powtec.2017.06.053
Wang, G., Wang, Q., Easton, M. A., Dargusch, M. S., Qian, M., Eskin, D. G. and StJohn, D. H. (2017). Role of ultrasonic treatment, inoculation and solute in the grain refinement of commercial purity aluminium. Scientific Reports, 7 (1) 9729, 9729. doi: 10.1038/s41598-017-10354-6
Wang, Gui, Dargusch, Matthew S., Eskin, Dmitry G. and StJohn, David H. (2017). Identifying the stages during ultrasonic processing that reduce the grain size of aluminum with added Al3Ti1B master alloy. Advanced Engineering Materials, 19 (8) 1700264, 1700264. doi: 10.1002/adem.201700264
Wang, Gui, Croaker, Paul, Dargusch, Matthew, McGuckin, Damian and StJohn, David (2017). Simulation of convective flow and thermal conditions during ultrasonic treatment of an Al-2Cu alloy. Computational Materials Science, 134, 116-125. doi: 10.1016/j.commatsci.2017.03.041
Guo, Enyu, Zeng, Guang, Kazantsev, Daniil, Rockett, Peter, Bent, Julian, Kirkland, Mark, Van Dalen, Gerard, Eastwood, David S., StJohn, David and Lee, Peter D. (2017). Synchrotron X-ray tomographic quantification of microstructural evolution in ice cream-a multi-phase soft solid. RSC Advances, 7 (25), 15561-15573. doi: 10.1039/c7ra00642j
Mereddy, S., Bermingham, M. J., StJohn, D. H. and Dargusch, M. S. (2017). Grain refinement of wire arc additively manufactured titanium by the addition of silicon. Journal of Alloys and Compounds, 695, 2097-2103. doi: 10.1016/j.jallcom.2016.11.049
Hu, Xiaoyu, Fu, Penghuai, St John, David, Peng, Liming, Sun, Ming and Zhang, Mingxing (2016). On grain coarsening and refining of the Mg-3Al alloy by Sm. Journal of Alloys and Compounds, 663, 387-394. doi: 10.1016/j.jallcom.2015.11.193
Lu, S. L., Qian, M., Tang, H. P., Yan, M., Wang, J. and St John, D. H. (2016). Massive transformation in Ti-6Al-4V additively manufactured by selective electron beam melting. Acta Materialia, 104, 303-311. doi: 10.1016/j.actamat.2015.11.011
Easton, M. A., Qian, M., Prasad, A. and StJohn, D. H. (2016). Recent advances in grain refinement of light metals and alloys. Current Opinion in Solid State and Materials Science, 20 (1), 13-24. doi: 10.1016/j.cossms.2015.10.001
Darlapudi, A., McDonald, S. D., Terzi, S., Prasad, A., Felberbaum, M. and StJohn, D. H. (2016). The influence of ternary alloying elements on the Al-Si eutectic microstructure and the Si morphology. Journal of Crystal Growth, 433, 63-73. doi: 10.1016/j.jcrysgro.2015.10.002
Prasad, Arvind, Macdonald, Stuart D., Yasuda, Hideyuki, Nogita, Kazuhiro and StJohn, David (2015). A real-time synchrotron X-ray study of primary phase nucleation and formation in hypoeutectic Al–Si alloys. Journal of Crystal Growth, 430, 122-137. doi: 10.1016/j.jcrysgro.2015.06.024
Zhang, Yaowu, Kent, Damon, Wang, Gui, St John, David and Dargusch, Matthew (2015). An investigation of the mechanical behaviour of fine tubes fabricated from a Ti-25Nb-3Mo-3Zr-2Sn alloy. Materials and Design, 85, 256-265. doi: 10.1016/j.matdes.2015.06.127
Darlapudi, A., McDonald, S. D. and StJohn, D. H. (2015). The influence of ternary Cu additions on the nucleation of eutectic grains in a hypoeutectic Al-10 wt.%Si alloy. Journal of Alloys and Compounds, 646, 699-705. doi: 10.1016/j.jallcom.2015.05.223
Liang, Dong, Sun, Jie, Liu, Tianyu, Zhai, Qijie, Wang, Gui, StJohn, David H., Dong, Hongbiao and Zhong, Honggang (2015). Enhanced Heterogeneous Nucleation by Pulsed Magneto-Oscillation Treatment of Liquid Aluminum Containing Al3Ti1B Additions. Advanced Engineering Materials, 17 (10), 1465-1469. doi: 10.1002/adem.201400488
Lu, Sheng-Lu, Tang, Hui-Ping, Qian, M., Hong, Quan, Zeng, Li-Ying and StJohn, D. H. (2015). A yttrium-containing high-temperature titanium alloy additively manufactured by selective electron beam melting. Journal of Central South University, 22 (8), 2857-2863. doi: 10.1007/s11771-015-2818-x
Bermingham, M. J., Kent, D., Zhan, H., StJohn, D. H. and Dargusch, M. S. (2015). Controlling the microstructure and properties of wire arc additive manufactured Ti–6Al–4V with trace boron additions. Acta Materialia, 91, 289-303. doi: 10.1016/j.actamat.2015.03.035
StJohn, D. H., Prasad, A., Easton, M. A. and Qian, M. (2015). The contribution of constitutional supercooling to nucleation and grain formation. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 46 (11), 4868-4885. doi: 10.1007/s11661-015-2960-y
Zhang, Yaowu, Kent, Damon, Wang, Gui, St John, David and Dargusch, Matthew (2015). Evolution of the microstructure and mechanical properties during fabrication of mini-tubes from a biomedical beta-titanium alloy. Journal of the Mechanical Behavior of Biomedical Materials, 42, 207-218. doi: 10.1016/j.jmbbm.2014.11.013
Lu, S. L., Tang, H. P., Ning, Y. P., Liu, N., StJohn, D. H. and Qian, M. (2015). Microstructure and mechanical properties of long Ti-6Al-4V rods additively manufactured by selective electron beam melting out of a deep powder bed and the effect of subsequent hot isostatic pressing. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 46 (9), 3824-3834. doi: 10.1007/s11661-015-2976-3
Liang, Dong, Liang, Zhu-yuan, Sun, Jie, Zhai, Qi-jie, Gui, Wang and StJohn, David H. (2015). Grain refinement of commercial pure al treated by Pulsed Magneto-Oscillation on the top surface of melt. China Foundry, 12 (1) 1672-6421, 48-53.
Wang, Gui, Dargusch, M. S., Qian, M., Eskin, D. G. and St John, David H. (2014). The role of ultrasonic treatment in refining the as-cast grain structure during the solidification of an Al–2Cu alloy. Journal of Crystal Growth, 408 (1), 119-124. doi: 10.1016/j.jcrysgro.2014.09.018
Liang, Dong, Liang, Zhuyuan, Zhai, Qijie, Wang, Gui and St John, David H. (2014). Nucleation and grain formation of pure Al under Pulsed Magneto-Oscillation treatment. Materials Letters, 130, 48-50. doi: 10.1016/j.matlet.2014.05.058
Zhang, Yaowu, Kent, Damon, Wang, Gui, StJohn, David and Dargusch, Matthew S. (2014). The cold-rolling behaviour of AZ31 tubes for fabrication of biodegradable stents. Journal of the Mechanical Behavior of Biomedical Materials, 39, 292-303. doi: 10.1016/j.jmbbm.2014.07.026
Sweet, Lisa, Easton, Mark A., Taylor, John A., Grandfield, John F., Davidson, Cameron J., Lu, Liming, Couper, Malcolm J. and StJohn, David H. (2013). Hot tear susceptibility of Al-Mg-Si-Fe alloys with varying iron contents. Metallurgical and Materials Transactions A, 44A (12), 5396-5407. doi: 10.1007/s11661-012-1562-1
Nogita, Kazuhiro, Yasuda, Hideyuki, Prasad, Arvind, McDonald, Stuart D., Nagira, Tomoya, Nakatsuka, Noriaki, Uesugi, Kentaro and StJohn, David H. (2013). Real time synchrotron X-ray observations of solidification in hypoeutectic Al-Si alloys. Materials Characterization, 85, 134-140. doi: 10.1016/j.matchar.2013.08.015
Prasad, Arvind, Yuan, Lang, Lee, Peter D. and StJohn, David H. (2013). The Interdependence model of grain nucleation: a numerical analysis of the Nucleation-Free Zone. Acta Materialia, 61 (16), 5914-5927. doi: 10.1016/j.actamat.2013.06.015
St John, D. H., Easton, M. A., Qian, M. and Taylor, J. A. (2013). Grain refinement of magnesium alloys: a review of recent research, theoretical developments and their application. Metallurgical and Materials Transactions A, 44 (7), 2935-2949. doi: 10.1007/s11661-012-1513-x
Sun, Ming, Easton, Mark A., StJohn, David H., Wu, Guohua, Abbott, Trevor B. and Ding, Wenjiang (2013). Grain refinement of magnesium alloys by Mg-Zr master alloys: the role of alloy chemistry and Zr particle number density. Advanced Engineering Materials, 15 (5), 373-378. doi: 10.1002/adem.201200297
Easton, Mark A., Wang, Hao, Grandfield, John, Davidson, Cameron J., Stjohn, David H., Sweet, Lisa D. and Couper, Malcolm J. (2012). Observation and prediction of the hot tear susceptibility of ternary Al-Si-Mg alloys. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 43 (9), 3227-3238. doi: 10.1007/s11661-012-1132-6
Hirmke, J., Zhang, M. -X. and St John, D. H. (2012). Influence of chemical composition of Mg alloys on surface alloying by diffusion coating. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 43 (5), 1621-1628. doi: 10.1007/s11661-011-1034-z
Hirmke, J., Zhang, M. X. and St John, D. H. (2011). Surface alloying of AZ91E alloy by Al-Zn packed powder diffusion coating. Surface and Coatings Technology, 206 (2-3), 425-433. doi: 10.1016/j.surfcoat.2011.07.050
Bermingham, M. J., McDonald, S. D., Buddery, A. J., StJohn, D. H. and Dargusch, M. S. (2011). Processing considerations for cast Ti–25Nb–3Mo–3Zr–2Sn biomedical alloys. Materials Science and Engineering C: Materials for Biological Applications, 31 (7), 1520-1525. doi: 10.1016/j.msec.2011.06.011
StJohn, D. H., Qian, M., Easton, M. A. and Cao, P. (2011). The Interdependence Theory: The relationship between grain formation and nucleant selection. Acta Materialia, 59 (12), 4907-4921. doi: 10.1016/j.actamat.2011.04.035
Bermingham, Michael J., McDonald, Stuart D., StJohn, David H. and Dargusch, Matthew S. (2011). The effect of boron on the refinement of microstructure in cast cobalt alloys. Journal of Materials Research, 26 (7), 951-956. doi: 10.1557/jmr.2011.21
Dargusch, M. S., Bermingham, M. J., McDonald, S. D. and St John, D. H. (2010). Effects of boron on microstructure in cast zirconium alloys. Journal of Materials Research, 25 (9), 1695-1700. doi: 10.1557/JMR.2010.0233
Song, G., Atrens, A., StJohn, D., Nairn, J. and Li, Y. (2010). ChemInform Abstract: The Electrochemical Corrosion of Pure Magnesium in 1 N NaCl. ChemInform, 28 (31), 1-1. doi: 10.1002/chin.199731028
Qian, M., Ramirez, A., Das, A. and St John, D. H. (2010). The effect of solute on ultrasonic grain refinement of magnesium alloys. Journal of Crystal Growth, 312 (15), 2267-2272. doi: 10.1016/j.jcrysgro.2010.04.035
Easton, Mark, Davidson, Cameron and St John, David (2010). Effect of alloy composition on the dendrite arm spacing of multicomponent aluminum alloys. Metallurgical and Materials Transactions A, 41 (6), 1528-1538. doi: 10.1007/s11661-010-0183-9
Qian, M., Cao, P., Easton, M. A., McDonald, S. D. and St John, D. H. (2010). An analytical model for constitutional supercooling-driven grain formation and grain size prediction. Acta Materialia, 58 (9), 3262-3270. doi: 10.1016/j.actamat.2010.01.052
Dargusch, M. S., Nave, M., McDonald, S. D. and StJohn, D. H. (2010). The effect of aluminium content on the eutectic morphology of high pressure die cast magnesium-aluminium alloys. Journal of Alloys and Compounds, 492 (1-2), L64-L68. doi: 10.1016/j.jallcom.2009.11.199
Bermingham, M. J., McDonald, S. D., St John, D. H. and Dargusch, M. S. (2010). Titanium as an endogenous grain-refining nucleus. Philosophical Magazine, 90 (6), 699-715. doi: 10.1080/14786430903236057
St John, David H., Easton, M. and Qian, Ma (2010). An overview of magnesium research at CAST. Metal Casting Technologies, 56 (2), 30-35.
Qian, M., Hildebrand, Z.C.G. and StJohn, D. H. (2009). The loss of dissolved zirconium in zirconium-refined magnesium alloys after remelting. Metallurgical and materials transactions. A, Physical metallurgy and materials science, 40 (10), 2470-2479. doi: 10.1007/s11661-009-9928-8
Bermingham, Michael, McDonald, Stuart, Dargusch, Matthew and St John, David (2009). Latest developments in understanding grain refinement of cast titanium. Light Metals Age, 67 (4), 47-49.
Bermingham, M. J., McDonald, S. D., StJohn D. H. and Dargusch, M. S. (2009). Beryllium as a grain refiner in titanium alloys. Journal of Alloys and Compounds, 481 (1-2), L20-L23. doi: 10.1016/j.jallcom.2009.03.016
Bermingham, M. J., McDonald, S. D., StJohn, D. H. and Dargusch, M. S. (2009). Segregation and grain refinement in cast titanium alloys. Journal of Materials Research, 24 (4), 1529-1535. doi: 10.1557/JMR.2009.0173
Bermingham, M., McDonald, S.D., Nogita, K., St John, D.H. and Dargusch, M.S. (2008). Effects of boron on microstructure in cast titanium alloys. Scripta Materialia, 59 (5), 538-541. doi: 10.1016/j.scriptamat.2008.05.002
Yao, X., Dargusch, M.S., Dahle, A.K., Davidson, C.J. and St John, D.H. (2008). Investigation into the effect of nucleation parameters on grain formation during solidification using a cellular automaton-finite control volume method. Journal of Materials Research, 23 (9), 2312-2325. doi: 10.1557/JMR.2008.0303
Ramirez, A., Qian Ma, Davis, B., Wilks, T. and St John, D.H. (2008). Potency of high-intensity ultrasonic treatment for grain refinement of magnesium alloys. Scripta Materialia, 59 (1), 19-22. doi: 10.1016/j.scriptamat.2008.02.017
Easton, M. A. and St John, D. H. (2008). Improved prediction of the grain size of aluminum alloys that includes the effect of cooling rate. Materials Science and Engineering: A, 486 (1-2), 8-13. doi: 10.1016/j.msea.2007.11.009
Bermingham, M., McDonald, S.D., Dargusch, M.S. and St John, D.H. (2008). The mechanism of grain refinement of titanium by silicon. Scripta Materialia, 58 (12), 1050-1053. doi: 10.1016/j.scriptamat.2008.01.041
Yao, X., McDonald, S. D., Dahle, A. K., Davidson, C. J. and St John, D. H. (2008). Modeling of grain refinement: Part III. Al-7Si-0.3Mg aluminum alloy. Journal of Materials Research, 23 (5), 1301-1306. doi: 10.1557/JMR.2008.0155
Yao, X., McDonald, S.D., Dahle, A.K., Davidson, C.J. and St John, D.H. (2008). Modeling of grain refinement: Part II. Effect of nucleant particles-TiB2 additions for aluminum. Journal of Materials Research, 23 (5), 1292-1300. doi: 10.1557/JMR.2008.0154
Yao, X., McDonald, S. D., Dahle, A. K., Davidson, C. J. and St John, D. H. (2008). Modeling of grain refinement: Part I. Effect of the solute titanium for aluminum. Journal of Materials Research, 23 (5), 1282-1291. doi: 10.1557/JMR.2008.0153
Dargusch, Matthew Simon, Zhang, Ming-Xing, Palanisamy, Suresh, Buddery, Alexander John Michael and StJohn, David Henry (2008). Subsurface deformation after dry machining of Grade 2 titanium. Advanced Engineering Materials, 10 (1-2), 85-88. doi: 10.1002/adem.200700233
Bermingham, M., McDonald, S.D., Dargusch, M.S. and St John, D.H. (2008). Grain-refinement mechanisms in titanium alloys. Journal of Materials Research, 23 (1), 97-104. doi: 10.1557/JMR.2008.0002
Palanisamy, S., Dargusch, M. S., McDonald, S., St John, D. H. and Brandt, M. (2007). A rationale for the acoustic monitoring of surface deformation in Ti6Al4V alloys during machining. Advanced Engineering Materials, 9 (11), 1000-1004. doi: 10.1002/adem.200700117
Cao, Peng, Qian, M., Kondoh, Katsuyoshi and StJohn, D. H. (2007). A comparative study of carbon additives on grain refinement of magnesium alloys. Giessereiforschung [International Foundry Research], 58 (4), 18-21.
Mitchell, J. B., Cockcroft, S. L., Viano, D., Davidson, C. and St John, D. (2007). Determination of strain during hot tearing by image correlation. Metallurgical And Materials Transactions A-physical Metallurgy And Materials Science, 38A (10), 2503-2512. doi: 10.1007/s11661-007-9221-7
Dargusch, M.S., Hamasaiid, A., Dour, G., Loulou, T., Davidson, C.J. and St John, D.H. (2007). The accurate determination of heat transfer coefficient and its evolution with time during high pressure die casting of Al-9%Si-3%Cu and Mg-9%Al-1%Zn alloys. Advanced Engineering Materials, 9 (11), 995-999. doi: 10.1002/adem.200700189
St John, David H., Cao, Peng, Oian, Ma and Easton, Mark A. (2007). A new analytical approach to reveal the mechanisms of grain refinement. Advanced Engineering Materials, 9 (9), 739-746. doi: 10.1002/adem.200700157
Song, G.L., Hapugoda, S. and St John, D. (2007). Degradation of the surface appearance of magnesium and its alloys in simulated atmospheric environments. Corrosion Science, 49 (3), 1245-1265. doi: 10.1016/j.corsci.2006.07.005
Cao, Peng, Qian, Ma and St John, David H. (2007). Mechanism for grain refinement of magnesium alloys by superheating. Scripta Materialia, 56 (7), 633-636. doi: 10.1016/j.scriptamat.2006.12.009
Bermingham, M., McDonald, S.D., Dargusch, M.S. and St John, D.H. (2007). Microstructure of cast titanium alloys. Materials Forum, 31, 84-89.
Cao, Peng, Qian, Ma and St John, David H. (2006). Effect of manganese on grain refinement of Mg-Al based alloys. Scripta Materialia, 54 (11), 1853-1858. doi: 10.1016/j.scriptamat.2006.02.020
Yao, X., Dahle, A. K., Davidson, C. J. and St John, D. H. (2006). Effect of solute on the growth rate and the constitutional undercooling ahead of the advancing interface during solidification of an alloy and the implications for nucleation. Journal Of Materials Research, 21 (10), 2470-2479. doi: 10.1557/JMR.2006.0302
Davidson, C., Viano, D., Lu, L. and St John, D. (2006). Observation of crack initiation during hot tearing. International Journal of Cast Metals Research, 19 (1), 59-65. doi: 10.1179/136404606225023291
Lu, L., Dahle, A. K. and St John, D. H. (2006). Heterogeneous nucleation of Mg-Al alloys. Scripta Materialia, 54 (12), 2197-2201. doi: 10.1016/j.scriptamat.2006.02.048
Cao, Peng, Qian, Ma and St John, David H. (2005). Native grain refinement of magnesium alloys. Scripta Materialia, 53 (7), 841-844. doi: 10.1016/j.scriptamat.2005.06.010
St. John, David H., Qian, Ma, Easton, Mark A., Cao, Peng and Hildebrand, Zoë (2005). Grain refinement of magnesium alloys. Metallurgical and Materials Transactions A, 36 (7), 1669-1679. doi: 10.1007/s11661-005-0030-6
Song, Guangling, St John, David, Bettles, Colleen J. and Dunlop, Gordon L. (2005). The Corrosion Performance of Magnesium Alloy AM-SC1 in Automotive Engine Block Applications. JOM Journal of the Minerals, Metals and Materials Society, 57 (5), 54-56. doi: 10.1007/s11837-005-0097-y
Song, G. and St John, D. H. (2005). Corrosion of magnesium alloys in commercial engine coolants. Materials And Corrosion, 56 (1), 15-23. doi: 10.1002/maco.200403803
Song, GL, Bowles, AL and St John, DH (2005). Effect of aging on yield stress and corrosion resistance of die cast magnesium alloy. Magnesium - Science, Technology And Applications, 488-489 (-), 709-712. doi: 10.4028/0-87849-968-7.709
Song, GL, St John, DH and Abbott, T (2005). Corrosion behaviour of a pressure die cast magnesium alloy. International Journal of Cast Metals Research, 18 (3), 174-180. doi: 10.1179/136404605225022964
Lu, L., Dahle, A. K. and St John, D. H. (2005). Grain refinement efficiency and mechanism of aluminium carbide in Mg-Al alloys. Scripta Materialia, 53 (5), 517-522. doi: 10.1016/j.scriptamat.2005.05.008
Easton, M. and St John, D. (2005). An analysis of the relationship between grain size, solute content, and the potency and number density of nucleant particles. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 36 (7), 1911-1920. doi: 10.1007/s11661-005-0054-y
St John, D. H. (2005). The CAST CRC: A light metals partnership between industry, government and R&D providers. Journal of Materials Science & Technology, 21 (1), 61-64.
Cao, P., Qian, Ma and St John, D. H. (2004). Grain coarsening of magnesium alloys by beryllium. Scripta Materialia, 51 (7), 647-651. doi: 10.1016/j.scriptamat.2004.06.022
Cao, P., Qian, Ma and St John, D. H. (2004). Effect of iron on grain refinement of high-purity MG-Al alloys. Scripta Materialia, 51 (2), 125-129. doi: 10.1016/j.scriptamat.2004.03.039
Cao, P., Qian, M., StJohn, D. H. and Frost, M. T. (2004). Uptake of iron and its effect on grain refinement of pure magnesium by zirconium. Materials Science And Technology, 20 (5), 585-592. doi: 10.1179/026708304225012314
Qian, Ma, StJohn, D. H. and Frost, M. T. (2004). Heterogeneous nuclei size in magnesium-zirconium alloys. Scripta Materialia, 50 (8), 1115-1119. doi: 10.1016/j.scriptamat.2004.01.026
Atrens, A., Truss, R. W., Dahle, A., Schaffer, G. B., St John, D. H., Caceres, C. and Gates, J. D. (2004). Graduate attributes in relation to curriculum design and delivery in a Bachelor of Materials Engineering Programme. International Journal of Engineering Education, 20 (5), 834-848.
Wang, H., Ning, Z. L., Yao, X., Davidson, C J and St John, D. H. (2004). Thixotropic structure formation in hypoeutectic Al-Si alloys by controlled nucleation. Materials Forum, 28, 1316-1321.
Winkelman, G. B., Chen, Z. W., St John, D. H. and Jahedi, M. Z. (2004). Morphological features of interfacial intermetallics and interfacial reaction rate in Al-11Si-2.5Cu-(0.15/0.60)Fe cast alloy/die steel couples. Journal of Materials Science, 39 (2), 519-528. doi: 10.1023/B:JMSC.0000011507.38552.19
McDonald, S. D., Dahle, A. K., Taylor, J. A. and St John, D. H. (2004). Eutectic grains in unmodified and strontium-modified hypoeutectic aluminum-silicon alloys. Metallurgical And Materials Transactions A-physical Metallurgy And Materials Science, 35A (6), 1829-1837. doi: 10.1007/s11661-004-0091-y
Jia, JX, Song, G, Atrens, A, St John, D, Baynham, J and Chandler, G (2004). Evaluation of the BEASY program using linear and piecewise linear approaches for the boundary conditions. Materials And Corrosion-werkstoffe Und Korrosion, 55 (11), 845-852. doi: 10.1002/maco.200403795
Wang, H., Davidson, C. J. and St John, D. H. (2004). Semisolid microstructural evolution of AlSi7Mg alloy during partial remelting. Materials Science And Engineering A-structural Materials Properties Microstructure And Processing, 368 (1-2), 159-167. doi: 10.1016/j.msea.2003.10.305
Song, G. L., Bowles, A. L. and St John, D. H. (2004). Corrosion resistance of aged die cast magnesium alloy AZ91D. Materials Science And Engineering A-structural Materials Properties Microstructure And Processing, 366 (1), 74-86. doi: 10.1016/j.msea.2003.08.060
Song, G. L., Johannesson, B., Hapugoda, S. and St John, D. (2004). Galvanic corrosion of magnesium alloy AZ91D in contact with an aluminium alloy, steel and zinc. Corrosion Science, 46 (4), 955-977. doi: 10.1016/S0010-938X(03)00190-2
McDonald, S. D., Dahle, A. K., Taylor, J. A. and St John, D. H. (2004). Modification-related porosity formation in hypoeutectic aluminum-silicon alloys. Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 35 (6), 1097-1106. doi: 10.1007/s11663-004-0065-x
Song, G. L. and St John, D. (2004). Corrosion behaviour of magnesium in ethylene glycol. Corrosion Science, 46 (6), 1381-1399. doi: 10.1016/j.corsci.2003.10.008
Easton, M., Wang, H., Grandfield, J., St John, D. H. and Sweet, E. (2004). An analysis of the effect of grain refinement on the hot tearing of aluminium alloys. Materials Forum, 28, 224-229.
Qian, M., Graham, D., Zheng, L., St John, D. H. and Frost, M. T. (2003). Alloying of pure magnesium with Mg-33.3 wt-%Zr master alloy. Materials Science And Technology, 19 (2), 156-162. doi: 10.1179/026708303225010849
Bettles, C. J., Forwood, C. T., Jones, D. S., Griffiths, J. R., Frost, M. T., St John, D. H., Qian, M., Song, G-L. and Nie, J. F. (2003). AMC-SC1: A new Magnesium alloy suitable for powertrain applications. SAE Transactions, 112 (5), 726-732.
Nave, M. D., Dahle, A. K. and St John, D. H. (2003). Method for determining reaction rate of mild steel containers during melting of magnesium-aluminium alloys and effect of aluminium content on directionally solidified microstructures. International Journal of Cast Metals Research, 16 (4), 427-433. doi: 10.1179/136404603225006404
Zhang, D. L., Zheng, L. H. and StJohn, D. H. (2002). Effect of a short solution treatment time on microstructure and mechanical properties of modified Al-7wt.%Si-0.3wt.%Mg alloy. Journal of Light Metals, 2 (1), 27-36. doi: 10.1016/S1471-5317(02)00010-X
Nave, M. D., Dahle, A. K. and St John, D. H. (2002). Halo formation in directional solidification. Acta Materialia, 50 (11), 2837-2849. doi: 10.1016/S1359-6454(02)00104-0
Qian, Ma, St John, D. H. and Frost, M. T. (2002). Characteristic zirconium-rich coring structures in Mg-Zr alloys. Scripta Materialia, 46 (9), 649-654. doi: 10.1016/S1359-6462(02)00046-5
Song G. and StJohn D. (2002). The effect of zirconium grain refinement on the corrosion behaviour of magnesium-rare earth alloy MEZ. Journal of Light Metals, 2 (1), 1-16. doi: 10.1016/S1471-5317(02)00008-1
Tian, C., Law, J., van der Touw, J., Murray, M., Yao, J. Y., Graham, D. and St. John, D. (2002). Effect of melt cleanliness on the formation of porosity defects in automotive aluminium high pressure die castings. Journal of Materials Processing Technology, 122 (1), 82-93. doi: 10.1016/S0924-0136(01)01229-8
Qian, Ma, Zheng, L., Graham, D., Frost, M. T. and StJohn, D. H. (2001). Settling of undissolved zirconium particles in pure magnesium melts. Journal of Light Metals, 1 (3), 157-165. doi: 10.1016/S1471-5317(01)00009-8
Dahle, A. K., Lee, Y., Nave, M., Schaffer, P. L. and St John, D. H. (2001). Development of the as-cast microstructure in magnesium-aluminium alloys. Journal of Light Metals, 1 (1), 61-72. doi: 10.1016/S1471-5317(00)00007-9
McDonald, S., Dahle, A. K., Taylor, J. A., St John, D. H. and Zindel, J. W. (2001). Microstructural evolution and defect formation in Al-Si-Cu-Mg foundry alloy during solidification. Die Casting Bulletin, 88, 12-19.
Otte, M., Schneider, W., St John, D. H. and Taylor, J. A. (2001). The influence of certain elements on porosity formation in an AlSi9Cu3 casting alloy. Giesserei Forschung, 53 (1), 1-14.
Dahle, A. K. and St John, D. H. (2001). The causes of ribbon shaped defects in magnesium die castings. Giesserei-Praxis, 7, 284-290.
Easton, M. A. and St John, D. H. (2001). A model of grain refinement incorporating alloy constitution and potency of heterogeneous nucleant particles. Acta Materialia, 49 (10), 1867-1878. doi: 10.1016/S1359-6454(00)00368-2
Taylor, J. A., St John, D. H., Zheng, L., Edwards, G. A., Barresi, J. and Couper, M. J. (2001). Solution treatment effects in Al-Si-Mg casting alloys: Part 1 - intermetallic phases. Aluminium Transactions: An International Journal, 4-5, 95-110.
Ma, Q., Taylor, J. A., Yao, J., Couper, M. J. and St John, D. H. (2001). A practical method for identifying intermetallic phase particles in aluminium alloys by electron probe microanalysis. Journal of Light Metals, 1 (3), 187-193. doi: 10.1016/S1471-5317(01)00012-8
Dahle, A. K., Sannes, S, St John, D. H. and Westengen, H (2001). Formation of defect bands in high pressure die cast magnesium alloys. Journal of Light Metals, 1 (2), 99-103. doi: 10.1016/S1471-5317(01)00002-5
Veldman, N. L. M., Dahle, A. K., St John, D. H. and Arnberg, L. (2001). Dendrite coherency of Al-Si-Cu alloys. Metallurgical And Materials Transactions A-physical Metallurgy And Materials Science, 32 (1), 147-155. doi: 10.1007/s11661-001-0110-1
Taylor, J. A., St John, D. H. and Couper, M. J. (2001). Solution treatment effects in Al-Si-Mg cating alloys: Part 2 - Solid solution chemistry. Aluminium Transactions: An International Journal, 4-5, 111-124.
Sumitomo, T, StJohn, DH and Steinberg, T (2000). The shear behaviour of partially solidified Al-Si-Cu alloys. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 289 (1-2), 18-29. doi: 10.1016/S0921-5093(00)00936-9
Easton M.A. and StJohn D.H. (2000). Partitioning of titanium during solidification of aluminium alloys. Materials Science and Technology, 16 (9), 993-1000. doi: 10.1179/026708300101508946
Lee, Y. C., Dahle, A. K. and St John, D. H. (2000). The role of solute in grain refinement of magnesium. Metallurgical and Materials Transactions A, 31 (11), 2895-2906. doi: 10.1007/BF02830349
Taylor, JA, St John, DH, Barresi, J and Couper, MJ (2000). Influence of Mg content on the microstructure and solid solution chemistry of Al-7%Si-Mg casting alloys during solution treatment. Materials Science Forum, 331-337, 277-282. doi: 10.4028/www.scientific.net/MSF.331-337.277
Taylor, J. A., St John, D. H., Barresi, J. and Couper, M. J. (2000). An empirical analysis of trends in mechanical properties of T6 heat treated Al-Si-Mg casting alloys. International Journal of Cast Metals Research, 12 (6), 419-430. doi: 10.1080/13640461.2000.11819379
Dahle, A. K. and St John, D. H. (2000). A K Dahle and D H St John, "Prevent banded defects in high-pressure diecast magnesium alloys", Invited Feature Article. Modern Casting, 90 (2), 43-46.
Dahle, A. K., St John, D. H. and Dunlop, G. L. (2000). Developments and challenges in the utilisation of magnesium alloys. Materials Forum, 24, 167-182.
Dahle, A. K., St John, D. H., Attavanich, P. and Taopetch, P. (2000). Aluminium alloys - their physical and mechanical properties: Grain formation in AlSi7Mg0.35 foundry alloy at low superheat. Materials Science Forum, 331-337, 271-276.
Taylor, J. A., St John, D. H., Barresi, J. and Couper, M. J. (2000). Influence of Mg content on the microstructure and solid solution chemistry of Al-7%Si-Mg casting alloys during solution treatment. Materials Science Forum, 331-337, 277-282.
Nave, M., Dahle, A. K. and St John, D. H. (2000). The effect of solidification rate on the structure of magnesium-aluminium eutectic grains. International Journal of Cast Metals Research, 13 (1), 1-7.
Easton M.A. and StJohn D.H. (2000). The effect of grain refinement on the formation of casting defects in alloy 356 castings. International Journal of Cast Metals Research, 12 (6), 393-408. doi: 10.1080/13640461.2000.11819377
Instone, S, StJohn, D and Grandfield, J (2000). New apparatus for characterising tensile strength development and hot cracking in the mushy zone. International Journal of Cast Metals Research, 12 (6), 441-456.
Song, GL and StJohn, D (2000). Corrosion performance of magnesium alloys MEZ and AZ91. International Journal of Cast Metals Research, 12 (6), 327-334.
Nave, M. D., Dahle, A. K. and StJohn, D. H. (2000). The effect of solidification rate on the structure of magnesium-aluminium eutectic grains. International Journal of Cast Metals Research, 13 (1), 1-7. doi: 10.1080/13640461.2000.11819383
Song, Guangling and StJohn, David (2000). Corrosion performance of magnesium alloys MEZ and AZ91. International Journal of Cast Metals Research, 12 (6), 327-334. doi: 10.1080/13640461.2000.11819371
Instone, Stephen, StJohn, David and Grandfield, John (2000). New apparatus for characterising tensile strength development and hot cracking in the mushy zone. International Journal of Cast Metals Research, 12 (6), 441-456. doi: 10.1080/13640461.2000.11819381
Taylor, J. A., St John, D. H., Barresi, J. and Couper, M. J. (2000). Influence of Mg content on the microstructure and solid solution chemistry of Al-7%Si-Mg casting alloys during solution treatment. Materials Science Forum, 331.
Dahle, A. K., St John, D. H., Attavanich, P. and Taopetch, P. (2000). Grain formation in AlSi7Mg0.35 foundary alloy at low superheat. Materials Science Forum, 331.
H.Wang H.WangH.Wang H.WangH.https://api.elsevier.com/content/author/author_id/56820338700 and H.Wang H.WangH.Wang H.WangH.https://api.elsevier.com/content/author/author_id/56820338700 (2000). Comparison of the semisolid shear behaviour of Al-7Si-0.35Mg alloys produced by two casting methods. Materials Science Forum, 329, 449-454.
Taylor, J. A., Schaffer, G. B. and St John, D. H. (1999). The role of iron in the formation of porosity in Al-Si-Cu based casting alloys - Part 3: A microstructural model. Metallurgical and Materials Transactions A, 30 (6), 1657-1662. doi: 10.1007/s11661-999-0103-z
Taylor, J. A., Schaffer, G. B. and St John, D. H. (1999). The role of iron in the formation of porosity in Al-Si-Cu based casting alloys - Part 2: A phase diagam approach. Metallurgical and Materials Transactions A, 30 (6), 1651-1655. doi: 10.1007/s11661-999-0102-0
Taylor, J. A., Schaffer, G. B. and St John, D. H. (1999). The role of iron in the formation of porosity in Al-Si-Cu based alloys - Part I: Initial experimental observations. Metallurgical and Materials Transactions A, 30 (6), 1643-1650. doi: 10.1007/s11661-999-0101-1
Easton, M and StJohn, D (1999). Grain refinement of aluminum alloys: Part I. The nucleant and salute paradigms - A review of the literature. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 30 (6), 1613-1623. doi: 10.1007/s11661-999-0098-5
Easton, M and StJohn, D (1999). Grain refinement of aluminum alloys: Part II. Confirmation of, and a mechanism for, the solute paradigm. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 30 (6), 1625-1633. doi: 10.1007/s11661-999-0099-4
Hutt, J. E. C., St John, D. H., Hogan, L. and Dahle, A. K. (1999). Equiaxed solidification of Al-Si alloys. Materials Science and Technology, 15 (5), 495-500. doi: 10.1179/026708399101506184
Easton, M. and St John, D. H. (1999). Grain refinement of aluminum alloys: Part I. The nucleant and solute paradigms - a review of the literature. Metallurgical & Materials Transactions A, 30A (6), 1613-1623.
Lee, Y. C., Dahle, A. K., St John, D. H. and Hutt, J. E. C. (1999). The effect of grain refinement and silicon content on grain formation in hypoeutectic Al-Si alloys. Materials Science And Engineering A - Structural Materials Properties Microstructure and Processing, 259 (1), 43-52. doi: 10.1016/S0921-5093(98)00884-3
Dahle, AK, Thevik, HJ, Arnberg, L and St John, DH (1999). Modeling the fluid-flow-induced stress and collapse in a dendritic network. Metallurgical And Materials Transactions B-process Metallurgy And Materials Processing Science, 30 (2), 287-293. doi: 10.1007/s11663-999-0058-x
St John, D. H., Dahle, A. K., Easton, M., Hutt, J. and Veldman, N. (1999). Solidification of hypoeutectic aluminium - silicon alloys. Materials Forum (Australia), 23, 137-152.
Dahle, A. K., Thevik, H. J., Arnberg, L. and St John, D. H. (1999). Modelling the fluid flow induced stress and collapse in a dendritic network. Metallurgical & Materials Transactions B, 30B (2), 287-293.
St John, D. H. and Easton, M. (1999). The origin of equiaxed crystals in grain refined aluminium alloys. Aluminium Transactions, 1 (1), 51-58.
Easton, M. and St John, D. H. (1999). Grain refinement of aluminium alloys II. Confirmation of, and a mechanism for, the solute paradigm. Metallurgical & Materials Transactions A, 30A (6), 1625-1633.
Dahle, A. K. and St John, D. H. (1998). Rheological behaviour of the mushy zone and its effect on the formation of casting defects during solidification. Acta Materialia, 47 (1), 31-41. doi: 10.1016/S1359-6454(98)00342-5
Zhang, DL, Zheng, LH and StJohn, DH (1998). Effect of solution treatment temperature on tensile properties of Al-7Si-0-3Mg (wt-%) alloy. Materials Science and Technology, 14 (7), 619-625. doi: 10.1179/mst.1998.14.7.619
Hutt, J. and St John, D. (1998). The origins of the equiaxed zone -Review of theoretical and experimental work. International Journal of Cast Metals Research, 11 (1), 13-22. doi: 10.1080/13640461.1998.11819254
Bremner, T., Hill, D. J. T., Killeen, M. I., O'Donnell, J. H., Pomery, P. J., St. John, D. and Whittaker, A. K. (1997). Development of wear-resistant thermoplastic polyurethanes by blending with poly(dimethyl siloxane). II: a packing model. Journal of Applied Polymer Science, 65 (5), 939-950. doi: 10.1002/(SICI)1097-4628(19970801)65:5<939::AID-APP12>3.0.CO;2-N
Hill, D. J. T., Killeen, M. I., Pomery, P. J., Pomery, P. J., St John, D. and Whittaker, A. K. (1997). Laboratory wear testing of polyurethane elastomers. Wear, 208 (1-2), 155-160. doi: 10.1016/S0043-1648(96)07514-X
Song, G, Atrens, A, Stjohn, D, Nairn, J and Li, Y (1997). The electrochemical corrosion of pure magnesium in 1 N NaCl. Corrosion Science, 39 (5), 855-875. doi: 10.1016/S0010-938X(96)00172-2
Song, G, Atrens, A, St John, D, Wu, X and Nairn, J (1997). The anodic dissolution of magnesium in chloride and sulphate solutions. Corrosion Science, 39 (10-11), 1981-2004. doi: 10.1016/S0010-938X(97)00090-5
Barresi, J., Chen, Z., Davidson, C. J., Murray, M. T., Nguyen, T., Stjohn, D. H. and Thorpe, W. R. (1996). Casting of aluminium alloy components. Materials Forum, 20, 53-70.
Hill, D. J. T., Killeen, M. I., O'Donnell, J. H., Pomery, P. J., St. John, D. and Whittaker, A. K. (1996). Development of wear-resistant thermoplastic polyurethanes by blending with poly(dimethyl siloxane). I: physical properties. Journal of Applied Polymer Science, 61 (10), 1757-1766. doi: 10.1002/(SICI)1097-4628(19960906)61:10<1757::AID-APP16>3.0.CO;2-#
XU, L and JOHN, DS (1995). WEAR PERFORMANCE OF 0.6-PERCENT-CR ALLOYED CAST AND HEAT-TREATED STEELS WITH CARBON CONTENTS OF 0.7, 1.0, AND 1.3-PERCENT. Materials Science and Technology, 11 (8), 787-790. doi: 10.1179/mst.1995.11.8.787
Mouritz, Adrian P. and St John, David H. (1992). Wear of some commercial epoxy resin/ceramic particle composites by sliding and impact abrasion. Metals forum, 16 (1), 9-18.
HAMLYNHARRIS, JH, STJOHN, DH and SOOD, DK (1991). AMORPHIZATION OF NICKEL AND NI-P ALLOYS BY ION-IMPLANTATION. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 147 (2), 201-210. doi: 10.1016/0921-5093(91)90847-G
Hay, S., Nairn, J. D. and St. John, D. H. (1991). Secondary precipitate growth in Mg-PSZ. Key Engineering Materials, 53-55, 744-749.
PAGE, NW, KILLEN, PD and STJOHN, DH (1990). SINTERING ENHANCEMENT IN DYNAMICALLY COMPACTED COMMERCIAL IRON POWDERS. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 130 (2), 231-240. doi: 10.1016/0921-5093(90)90063-9
HAMLYNHARRIS, JH, STJOHN, DH and SOOD, DK (1990). THE THERMAL-STABILITY OF NI-11 WT-PERCENT P METALLIC-GLASS. Journal of Materials Science, 25 (6), 3008-3016. doi: 10.1007/BF00584919
STJOHN, DH (1990). THE PERITECTIC REACTION. Acta Metallurgica Et Materialia, 38 (4), 631-636. doi: 10.1016/0956-7151(90)90218-6
COGHILL, MDE and STJOHN, DH (1990). SCRATCH ADHESION TESTING OF SOFT METALLIC COATINGS ON GLASS. Surface & Coatings Technology, 41 (2), 135-146. doi: 10.1016/0257-8972(90)90162-6
Geva, S., Farren, M., St John, D. H. and Hayes, P. C. (1990). The effects of impurity elements on the reduction of wustite and magnetite to iron in CO/CO2 and H2/H2O gas mixtures. Metallurgical Transactions B, 21 (4), 743-751. doi: 10.1007/BF02654253
St. John, David H. (1989). Freezing diagrams: Part II. Comparison with experimental observation and relevance to crystallization of metallic glass. Metallurgical Transactions A, 20 (2), 299-309. doi: 10.1007/BF02670256
MOURITZ, AP, SOOD, DK, STJOHN, DH, SWAIN, MV and WILLIAMS, JS (1987). ION-IMPLANTATION OF LOW MELTING-POINT METALS INTO SAPPHIRE. Nuclear Instruments & Methods in Physics Research Section B-Beam Interactions with Materials and Atoms, 19-20, 805-808. doi: 10.1016/S0168-583X(87)80161-1
St John D.H. and Hogan L.M. (1987). A simple prediction of the rate of the peritectic transformation. Acta Metallurgica, 35 (1), 171-174. doi: 10.1016/0001-6160(87)90226-4
Matthew, S. P., St. John, D. H., Hardy, J. V. and Hayes, P. C. (1986). Techniques for the preparation and examination of partially reduced oxides, Metallography. Metallography, 18 (4), 367-379. doi: 10.1016/0026-0800(85)90005-9
Nakiboglu, F., St John, D. H. and Hayes, P. C. (1986). The gaseous reduction of solid calciowustites in CO/CO2 and H2/H2O gas mixtures. Metallurgical Transactions B, 17 (2), 375-381. doi: 10.1007/BF02655085
St. John, D. H., Matthew, S. P. and Hayes, P. C. (1985). The Breakdown of dense iron layers on wustite in CO/Co2 and H2/H2O systems. Metallurgical Transactions B, 16 (4), 857-857. doi: 10.1007/BF02667525
STJOHN, DH (1985). CORRECTION. Metallurgical Transactions B-Process Metallurgy, 16 (4), 857-857. doi: 10.1007/BF02686993
St John, D. H., Matthew, S. P. and Hayes, P. C. (1984). The breakdown of dense iron layers on wustite in CO/CO2 and H2/H2O systems. Metallurgical Transactions B, 15 (4), 701-708. doi: 10.1007/BF02657292
St John, D. H., Nakiboglu, F. and Hayes, P. C. (1984). The effect of sulphur on the gaseous reduction of calciowustites. Metallurgical Transactions B, 17 (2), 383-393. doi: 10.1007/BF02655086
St John, D. H., Matthew, S. P. and Hayes, P. C. (1984). Establishment of product morphology during the initial stages of wustite reduction. Metallurgical Transactions B, 15 (4), 709-717. doi: 10.1007/BF02657293
Watts, M. A., St John, D. H. and Hayes, P. C. (1983). The decomposition of wustite under mixed chemical reaction/mass transport limitations. Metallurgical Transactions B, 14 (4), 753-759. doi: 10.1007/BF02653962
Baguley, P., St John, D. H. and Hayes, P. C. (1983). The conditions for the formation of lath and porous magnetite on reduction of hematite in H2/H2O gas mixtures. Metallurgical and Materials Transactions B, 14 (3), 513-514. doi: 10.1007/BF02654378
St. John, D.H. and Hogan, L.M. (1982). Thermal analysis of peritectic alloys. Journal of Materials Science, 17 (8), 2413-2418. doi: 10.1007/BF00543752
St John, D. H. and Hayes, P. C. (1982). Microstructural features produced by the reduction of wustite in H2/H2O gas mixtures. Metallurgical Transactions B, 13 (1), 117-124. doi: 10.1007/BF02666962
St. John, D. H. and Hogan, L. M. (1979). Metallography and growth crystallography of Al3Ti in Al-Ti alloys up to 5 wt% Ti. Journal of Crystal Growth, 46 (3), 387-398. doi: 10.1016/0022-0248(79)90087-3
St. John, D.H. and Hogan, L.M. (1977). The peritectic transformation. Acta Metallurgica, 25 (1), 77-81. doi: 10.1016/0001-6160(77)90248-6
STJOHN, DH and HOGAN, LM (1977). AL3TI AND GRAIN REFINEMENT OF ALUMINUM. Journal of the Australasian Institute of Metals, 22 (3-4), 160-166.

Conference Papers

Bermingham, Michael, StJohn, David, Easton, Mark, Yuan, Lang and Dargusch, Matthew (2020). Revealing the mechanisms of grain nucleation and formation during additive manufacturing. 2nd Asia-Pacific International Conference on Additive Manufacturing (APICAM 2019), Melbourne, VIC Australia, 1 - 3 July 2019. New York, NY, United States: Springer. doi: 10.1007/s11837-020-04019-5
Dehghan-Manshadi, A., StJohn, D. H., Dargusch, M. S. and Qian, M. (2020). Fabrication of highly porous titanium scaffolds using metal injection moulding and space holder. European Powder Metallurgy Congress and Exhibition (Euro PM 2018), Bilbao, Spain, 14-18 October 2018. Brussels, Belgium: European Powder Metallurgy Association (EPMA).
Yuan, L., Sabau, A. S., Stjohn, D., Prasad, A. and Lee, P. D. (2020). Columnar-to-equiaxed transition in a laser scan for metal additive manufacturing. 15th International Conference on Modelling of Casting, Welding and Advanced Solidification Processes, MCWASP 2020, Jonkoping, Sweden, 22 - 23 June 2020. Bristol, United Kingdom: Institute of Physics Publishing. doi: 10.1088/1757-899X/861/1/012007
Wang, Gui, Croaker, Paul, Dargusch, Matthew, McGuckin, Damian and StJohn, David (2019). Cellular automation finite element modeling of the evolution of the as-cast microstructure of an ultrasonically treated al-2cu alloy. Light Metals Symposium held at the TMS Annual Meeting and Exhibition, 2019, San Antonio, TX, March 10, 2019-March 14, 2019. CHAM: Springer International Publishing. doi: 10.1007/978-3-030-05864-7_205
Mehreen, Syeda U., Nogita, Kazuhiro, McDonald, Stuart and Stjohn, David (2019). Effect of Zn addition on Cu3Sn formation in Sn-10Cu alloys. The Electronic Packaging Interconnect Technology Symposium 2019 , Penang, Malaysia, 24–25 November 2019. Institute of Physics Publishing. doi: 10.1088/1757-899X/701/1/012009
Nagasivamuni, B., Wang, Gui, St John, David H. and Dargusch, Matthew S. (2019). Mechanisms of grain formation during ultrasonic solidification of commercial purity magnesium. Light Metals Symposium, TMS Annual Meeting and Exhibition, San Antonio, TX, United States, 10-14 March 2019. Cham, Switzerland: Springer International. doi: 10.1007/978-3-030-05864-7_200
Yuan, Lang, Prasad, Arvind, Lee, Peter D. and StJohn, David (2019). Numerical simulation of wave-like nucleation events. 5th International Conference on Advances in Solidification Processes (ICASP 2019) and 5th International Symposium on Cutting Edge of Computer Simulation of Solidification, Casting and Refining (CSSCR 2019), Salzburg, Austria, 17-21 June 2019. Bristol, United Kingdom: Institute of Physics Publishing. doi: 10.1088/1757-899X/529/1/012043
StJohn, D. H., Hu, X., Sun, M., Peng, L. and Dieringa, H. (2018). Recent developments in the application of the interdependence model of grain formation and refinement. International Symposium on Magnesium Technology, 2018, Phoenix, AZ, USA, March 11-15, 2018. Springer International Publishing. doi: 10.1007/978-3-319-72332-7_48
Wong, Charlotte, Styles, Mark J., Zhu, Suming, Abbott, Trevor, Nogita, Kazuhiro, McDonald, Stuart D., StJohn, David H., Gibson, Mark A. and Easton, Mark A. (2018). Experimental study of the solidification microstructure in the Mg-Rich corner of Mg–Al–Ce system. International Symposium on Magnesium Technology, 2018, Phoenix, AZ, USA, March 11, 2018-March 15, 2018. CHAM: Springer International Publishing. doi: 10.1007/978-3-319-72332-7_13
StJohn, David H., McDonald, Stuart D., Bermingham, Michael J., Mereddy, Sri, Prasad, Arvind and Dargusch, Matthew (2018). The challenges associated with the formation of equiaxed grains during additive manufacturing of titanium alloys. 4th International Conference on Powder Metallurgy of Titanium, PMTi 2017, Xian, China, 8-10 September 2017. Trans Tech Publications Ltd. doi: 10.4028/www.scientific.net/KEM.770.155
Darlapudi, A., McDonald, S.D. and St John, D.H. (2016). The influence of Cu, Mg and Ni on the solidification and microstructure of Al-Si alloys. 4th International Conference on Advances in Solidification Processes, ICASP 2014, Windsor, United Kingdom, July 8-11, 2014. Bristol, United Kingdom: Institute of Physics Publishing. doi: 10.1088/1757-899X/117/1/012022
Prasad, A., Yuan, L., Lee, P. D., Easton, M. and StJohn, D. (2016). The effect of the melt thermal gradient on the size of the constitutionally supercooled zone. 4th International Conference on Advances in Solidification Processes, ICASP 2014, Windsor, United Kingdom, 8 - 11 July 2014. Bristol, United Kingdom: Institute of Physics Publishing. doi: 10.1088/1757-899X/117/1/012001
Wang, Gui, Wang, Eric Qiang, Prasad, Arvind, Dargusch, Matthew and StJohn, David H. (2016). Grain refinement of Al-Si hypoeutectic alloys by Al3Ti1B master alloy and ultrasonic treatment. Shape Casting: 6th International Symposium, Nashville, Tennessee, United States, 14-18 February 2016. Hoboken, NJ, United States: John Wiley & Sons. doi: 10.1002/9781119274865.ch18
Wang, Gui, Dargusch, Matthew S. and St John, David H. (2016). Effect of Ultrasonic Treatment on The As-Cast Grain Structure during The Solidification of An Al-2Cu Alloy. The Ninth Pacific Rim International Conference on Advanced Materials and Processing, Kyoto, Japan, 1-5 August 2016.
Wang, E. Q., Wang, G., Dargusch, M. S., Qian, M., Eskin, D. G. and StJohn, D. H. (2016). Grain Refinement of an Al-2 wt%Cu Alloy by Al3Ti1B Master Alloy and Ultrasonic Treatment. 4th International Conference on Advances in Solidification Processes, ICASP 2014, Windsor, United Kingdom, 8 - 11 July 2014. Bristol, United Kingdom: Institute of Physics Publishing. doi: 10.1088/1757-899X/117/1/012050
Prasad, Arvind, Yuan, Lang, Lee, Peter D., Easton, Mark and StJohn, David (2015). On the solute diffusion length in the Interdependence Model: Dendritic versus non-Dendritic interface. Light Metals Technology 2015, South Afria, 27-29 July 2015. Pfaffikon, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.828-829.461
Prasad, A., Liotti, E., McDonald, S. D., Nogita, K., Yasuda, H., Grant, P. S. and StJohn, D. H. (2015). Real-time synchrotron x-ray observations of equiaxed solidification of aluminium alloys and implications for modelling. 14th International Conference on Modeling of Casting, Welding and Advanced Solidification Processes, Awaji island, Hyogo, Japan, 21-26 June 2015. Bristol, United Kingdom: Institute of Physics Publishing. doi: 10.1088/1757-899X/84/1/012014
Easton, Mark A., Prasad, Arvind and St John, David H. (2014). The grain refinement of Al-Si alloys and the cause of Si poisoning: Insights revealed by the interdependence model. 14th International Conference on Aluminium Alloys, ICAA 2014, Trondheim, Norway, 15-19 June 2014. Pfaffikon, Switzerland: Scientific.Net. doi: 10.4028/www.scientific.net/MSF.794-796.161
Easton, Mark A., St John, David H. and Prasad, Arvind (2014).Grain refinement of aluminium alloys: recent developments in predicting the as-cast grain size of alloys refined by Al-Ti-B master alloys. Light Metals 2014 - 2014 TMS 143rd Annual Meeting and Exhibition, San Diego, United States, 16-20 February 2014. Hoboken, NJ, United States :John Wiley & Sons. doi: 10.1002/9781118888438.ch156
Pucina, Eraldo, de Looze, Geoff, Tomus, Dacian, Easton, Mark A., Schiffl, Andreas and St John, David H. (2013). Practical considerations on the application of ultrasonic treatment to Mg-Al shape castings. LMT 2013: 6th International Light Metals Technology Conference, Old Windsor, United Kingdom, 24-26 July, 2013. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.765.255
Prasad, Arvind, Yuan, Lang, Lee, Peter D. and StJohn, David H. (2013). Improvement of the interdependence analytical model through selection of interfacial growth rates during the initial transient. LMT 2013: 6th International Light Metals Technology Conference, Old Windsor, UK, 24-26 July, 2013. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.765.77
StJohn, D. H., Cao, P., Qian, M. and Easton, M. A. (2013). A brief history of the development of grain refinement technology for cast magnesium alloys. Magnesium Technology 2013 - TMS 2013 142nd Annual Meeting and Exhibition, San Antonio, United States, 3-7 March 2013. Hoboken, NJ, United States: John Wiley & Sons. doi: 10.1002/9781118663004.ch1
Prasad, Arvind, Yuan, Lang, Lee, Peter and St John, David (2013). Modelling of the Nucleation-Free Zone formed during the initial transient of grain formation. TMS 142nd Annual Meeting and Exhibition, San Antonio, TX, United States, 3-7 March 2013. Hoboken, NJ, United States: John Wiley & Sons. doi: 10.1002/9781118663547.ch62
StJohn, David H., Easton, Mark A., Cao, Peng, Bermingham, Michael and Qian, Ma (2013). A brief history of the grain refinement of cast light alloys. LMT 2013: 6th International Light Metals Technology Conference, Old Windsor, UK, 24-26 July, 2013. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.765.123
Sun, Ming, Guohua, Wu, Easton, M. A., StJohn, D. H., Abbott, T. and Ding, Wenjiang (2012). A comparison of the microstructure of three Mg-Zr master alloys and their grain refinement efficiency. 9th International Conference on Magnesium Alloy and Their Applications, Vancouver, Canada, 8-12 July 2012. Vancouver,Canada: International Conference on Magnesium Alloy and Their Applications.
StJohn, David H., Easton, Mark A and Qian, Ma (2012). The Interdependence Theory: an improved predictor of grain size. 13th International Conference on Aluminum Alloys (ICAA13), Pittsburg, United States, 3-7 June 2012. Hoboken, NJ, United States: John Wiley & Sons. doi: 10.1002/9781118495292.ch216
Palanisamy, S., Dargusch, M. S., Sun, S., Bermingham, M. J., Wen, C. E., Wang, G., Xia, K. and StJohn, D. H. (2012). Review of recent titanium research in Australia. 12th World Conference on Titanium, Ti 2011, Beijing, China, 19-24 June 2011. Beijing, China: Science Press.
Easton, Mark, Davidson, Cameron and St John, David (2011). Grain morphology of as-cast wrought aluminium alloys. Sendai, Japan: Nihon Kinzoku Gakkai. doi: 10.2320/matertrans.L-MZ201118
Palanisamy, S., Dargusch, M. S., McDonald, S. D. and St John, D. H. (2011). Machining of titanium alloys with and without coolant. 5th International Conference on Light Metals Technology, Lüneburg, Germany, 19-22 July 2011. Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.690.481
StJohn, David H., Easton, Mark A., Qian, Ma, Cao, Peng and Bermingham, Michael J. (2011). Introduction to the interdependence theory of grain formation and its application to aluminium, magnesium and titanium alloys. 5th International Conference on Light Metals Technology, Luneburg, Germany, 19-22 July 2011. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.690.206
Easton, Mark, Davidson, Cameron and St John, David (2010). Grain morphology of as-cast wrought aluminium alloys. 12th International Conference on Aluminium Alloys (ICAA12), Yokohama, Japan, 5-9 September 2010. Tokyo, Japan: The Japan Institute of Light Metals.
Bermingham, Michael J., McDonald, Stuart D., Dargusch, Matthew S. and StJohn, David H. (2010). Effect of oxygen on the beta-grain size of cast titanium. 7th Pacific Rim International Conference on Advanced Materials and Processing, PRICM-7, Cairns, QLD, Australia, 2-6 August 2010. Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.654-656.1472
Easton, Mark, StJohn, David and Sweet, Lisa (2010). Grain refinement and hot tearing of aluminium alloys - How to optimise and minimise. 11th International Conference on Aluminium Cast House Technology, Surfers Paradise, QLD, 13-16 September 2009. Stafa-Zurich ; United Kingdom: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.630.213
StJohn, D. H., Easton, M. A. and Qian, Ma (2009). An overview of CAST's magnesium programs and an update on recent grain refinement research. Magnesium: 8th International Conference on Magnesium Alloys and their Applications, Weimar, Germany, 26-29 October 2009. Weinheim, Germany: Wiley-VCH.
StJohn, D. H., Easton, M. A. and Qian, Ma (2009). An inverse growth restriction model for predicting solidified grain size. 12th International Conference on Modeling of Casting, Welding and Advanced Solidification Processes, Vancouve, Canada, 7-14 June 2009. Warrendale, PA, United States: John Wiley & Sons.
Bermingham, Michael, McDonald, Stuart D., St John, David H. and Dargusch, Matthew S. (2009). Latest developments in understanding the grain refinement of cast titanium. 4th International Light Metals Technology Conference (LMT 2009), Gold Coast, Australia, 29 June - 1 July 2009. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.618-619.315
Qian, M. and StJohn, D. H. (2009). Grain nucleation and formation in Mg-Zr alloys. 2nd International Conference on Advances in Solidification Processes ICASP-2, Seggau Castle, Graz, Austria, 17-20 June, 2008. United Kingdom: Maney Publishing. doi: 10.1179/136404609X367885
Viano, David Michael, Wells, M. and St John, David H. (2009). A comparison of hot tear testing and hot tensile testing of Al-Cu alloys. 138th TMS Annual Meeting, San Francisco, CA, United States, 15-19 Feb 2009. Warrendale, PA, United States: Minerals, Metals and Materials Society.
Alexander John Michael Buddery, Dargusch, Matthew S., St John, David H., Drennan, John and Nabulsi, S. (2009). Laser welding of titanium and its alloys for medical applications: current knowledge and future direction. 4th International Light Metals Technology Conference (LMT 2009), Gold Coast, QLD Australia, 29 June - 1 July 2009. Pfaffikon, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.618-619.291
St. John, D. H., Easton, M. A. and Qian, Ma (2008). Controlling the semisolid grain size during solidification. The 10th International Conference on Semi-Solid Processing of Alloys and Composites, Aachen, Germany; Liège, Belgium, 16– 18 September 2008. Vaduz, Liechtenstein: Sci Tech Publications. doi: 10.4028/www.scientific.net/SSP.141-143.355
Yao, Xiangdong, Dahle, Arne K., Davidson, Cameron J. and St John, David H. (2007). Modelling of grain size transition with alloy concentration in solidified Al-Si alloys. New York: Springer. doi: 10.1007/s10853-007-1997-8
McDonald, Stuart, Dargusch, Matthew, Song, Guangling and StJohn, David (2007). Unintentional effects of Sr additions in Al-Si foundry alloys.
Viano, D.M., Spittle, J.A., Brown, S.G.R. and St John, D.H. (2007). Hot tearing in aluminium-zinc binary alloys: a comparison between experimental and modelling results. Solidification Processing 2007 (SP07), Sheffield, United Kingdom, 23-25 July 2007. Sheffield, United Kingdom: Department of Engineering Materials, University of Sheffield.
St John, David H., Easton, Mark A., Cao, Peng and Qian, Ma (2007). A new approach to the analysis of grain refinement. 5th Decennial International Conference on Solidification Processing, Sheffield, United Kingdom, 23-25 July 2007. Sheffield, U.K.: Department of Engineering Materials, University of Sheffield.
Palanisamy, S., McDonald, S.D., Dargusch, M.S. and St John, D.H. (2007). Vibration and surface deformation during machining of Ti6Al4V alloys. Light Metals Technology Conference 2007, Canada, 24-26 September, 2007. Canada: Public Works and Government Services Canada.
Easton, M., St John, D.H. and Kaufmann, H. (2007). A re-analysis of the effect of cooling conditions on grain size in conventional and semi-solid casting. 5th Decennial International Conference on Solidification Processing, Sheffield, United Kingdom, 23-25 July 2007. Sheffield, United Kingdom: University of Sheffield.
Easton, M. and St John, D.H. (2007). Theoretical Advances leading to improvements in Commercial Grain Refinement Practices in Al Alloys. Materials and Austceram 07, Sydney, Australia, 4-6 July 2007. Australia: The Institute of Materials Engineering Australasia Limited.
McDonald, S.D., Dargusch, M.S., Song, G. and St John, D.H. (2007). Unintentional Effects of Sr Additions in Al-Si Foundry Alloys. TMS Annual Meeting and Exhibition, Orlando, Florida, USA, 25 February to 1 March, 2007. United Stated: TMS (The Minerals, Metals and Materials Society).
Lu, L., Dahle, A.K., Davidson, C. and St John, D.H. (2007). Hot Tearing of Al-Si Alloys. Light Metals 2007, Orlando, Florida, USA, February 25 - March 1 2007. USA: The Minerals, Metals and Materials Society.
StJohn, David H. (2007). Overview of current international magnesium research and recent CAST CRC developments. 4th International Conference on Advanced Materials and Processing, ICAMP-4, Hamilton, December 10, 2006-December 13, 2006. Stafa-Zurich, Switzerland: Trans Tech Publications Ltd.. doi: 10.4028/www.scientific.net/AMR.29-30.3
StJohn, D. H., Easton, M. A., Cao, P. and Qian, M. (2007). New approach to the analysis of grain refinement. 5th Decennial International Conference on Solidification Processing, Sheffield, United Kingdom, 23-25 July 2007. Birmingham, United Kingdom: Maney. doi: 10.1179/136404607X240562
Palanisamy, S., Dargusch, M. S., McDonald, S. D. and StJohn, D. H. (2007). The influence of process parameters during machining of Ti6Al4V alloy. PRICM 6: The Sixth Pacific Rim International Conference on Advanced materials and Processing, Cheju Island, South Korea, 5-9 November, 2007. Zurich, Switzerland: Trans Tech Publications INC.. doi: 10.4028/www.scientific.net/MSF.561-565.159
Dover, I., Baumann, H., StJohn, D. H. and Dargusch, M. S. (2007). Integrating process, material and business strategies to transform a small-medium aluminium products manufacturer. PRICM 6: 6th Pacific Rim International Conference on Advanced Materials and Processing, Jeju Island, Korea, 5-9 November 2007. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.561-565.345
Dargusch, M.S., McDonald, S.D., Palanisamy, S. and St John, D.H. (2007). The influence of Process Parameters during Machining of Ti6A14V Alloy. PRICM 6, Jeju Island, Korea, 5-9 November 2007. Switzerland: Trans Tech Publications.
St John, D.H. (2007). Overview of CAST and Australian Magnesium Research. 2006 Beijing International Materials Week, Beijing, China, 25-30 June 2006. Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.546-549.49
StJohn, D. H., Cao, Peng, Qian, Ma and Easton, Mark A. (2006). A reassessment of the grain refinement mechanisms of magnesium alloys. Magnesium 2006: 7th International Conference on Magnesium Alloys and Their Applications, Dresden, Germany, 6-9 November 2006. Weinheim, Germany: Karger.
Cao, P., Qian, Ma, Kondoh, K. and StJohn, D. H. (2006). A comparative study of carbon additives on grain refinement of magnesium alloys. Magnesium 2006: 7th International Conference on Magnesium Alloys and Their Applications, Dresden, Germany, 6-9 November 2006. Weinheim, Germany: Karger.
Easton, Mark A., Grandfield, John, St John, David and Rinderer, Barbara (2006). The effect of grain refinement and cooling rate on the hot tearing of wrought aluminium alloys. 10th International Conference on Aluminium Alloys, Vancouver, Canada, 9-13 July 2006. Switzerland ; Germany ; USA: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.519-521.1675
Song, Guangling, Hapugoda, Sarath, StJohn, David and Bettles, Colleen (2006). Simulation of atmospheric environments for storage and transport of magnesium and its alloys. Symposium on Magnesium Technology 2006, San Antonio Tx, Mar 12-16, 2006. WARRENDALE: MINERALS, METALS & MATERIALS SOC.
Viano, David, Stjohn, David, Grandfield, John and Cáceres, Carlos (2005). Hot tearing in aluminium - Copper alloys. 134th TMS Annual Meeting, , , February 13, 2005-February 17, 2005.
StJohn, David H., Qian, Ma, Easton, Mark A., Cao, Peng and Hildebrand, Zoë (2005). Mechanisms of grain refinement of magnesium alloys. TMS 2004: 133rd Annual Meeting & Exhibition, Charlotte, North Carolina, U.S.A., 14-17 March, 2004. New York, NY, U.S.A.: Minerals, Metals & Materials Society (TMS). doi: 10.1007/s11661-005-0030-6
Cao, P., Qian, Ma and StJohn, D. H. (2005). Grain refinement of magnesium-aluminium alloys by iron inoculation. 3rd International Conference on Advanced Materials Processing (ICAMP-3) and International Ceramic Conference & Exhibition AUSTCERAM 2004, Melbourne, VIC, Australia, 29 November-1 December 2004. North Melbourne, VIC, Australia: Institute of Materials Engineering.
Dargusch, M. S., Keay, S., Arthur, J. and St John, D. H. (2005). The CAST Industry Best Practice Program. 36th Australian Foundry Institute National Conference, Sydney, 23-26 October 2005. Sydney Australia: Molten engineering.
St John, D. H. and Easton, M. (2005). The Application of a New Analytical Method for the Assessment of the Grain Refinement of Light Alloys. International Light metals Technology, St Wolfgang am Wolfgangsee, Austria, June 2005. St Wolfgang am Wolfgangsee, Austria: LMT05.
Cao, Peng, Qian, Ma and St John, David (2005). Grain refinement of commercial purity Mg-9%Al alloys by superheating. TMS 2005. 134th Annual Meeting and Exhibition: Fundamental Science, Emerging Technology, Practical Application--Where the Connection is Made., San Francisco, CA, U.S.A., 13-17 February 2005. Warrendale, PA, U.S.A.: Minerals, Metals & Materials Society (TMS).
Cao, Peng, St. John, David H. and Qian, Ma (2005). The effect of manganese on the grain size of commercial AZ31 alloy. International Conference on Magnesium - Science, Technology and Applications, Beijing, China, 20-24 September 2004. Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.488-489.139
Song, G. and St John, D. H. (2005). Corrosion Inhibition of Magnesium Alloys in Coolants. Magnesium Technology 2005, San Francisco, USA, February 13-17 2005. USA: The Minerals, Metals & Materials Society.
Lu, L., Dahle, A. K., Taylor, J. A. and St John, D. H. (2005). Theoretical and practical considerations of grain refinement of Mg-Al alloys. The International Conference on Magnesium - Science, Technology and Applications, Beijing, China, 20-24 September 2004. Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.488-489.299
Easton, Mark and St John, David (2005). An analysis of the relationship between grain size, solute content, and the potency and number density of nucleant particles. Minerals, Metals and Materials Society. doi: 10.1007/s11661-005-0054-y
Easton, M., Wang, H., Grandfield, J., StJohn, D. and Sweet, E. (2004). An analysis of the effect of grain refinement on the hot tearing of aluminium alloys.
Wang, H., Ning, Z. L., Davidson, C. J., StJohn, D. H. and Xie, S. S. (2004). Thixotropic structure formation in A390 hypereutectic Al-Si alloy. 8th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2004, , , September 21, 2004-September 23, 2004.
Barnett, RS, Taylor, JA and St John, DH (2004). The influence of hydrogen on the hot tearing susceptibility of aluminium-silicon alloys. Symposium on Solidification of Aluminum Alloys held at the TMS 2004 Annual Meeting, Charlotte Nc, Mar 14-18, 2004. WARRENDALE: MINERALS, METALS & MATERIALS SOC.
Qian, Ma, StJohn, D. H. and Frost, M. T. (2004). A new zirconium-rich master alloy for the grain refinement of magnesium alloys. 6th International Conference Magnesium Alloys and Their Applications, Wolfsburg, 18-20 November, 2003. Weinheim: Wiley. doi: 10.1002/3527603565.ch112
St John, D. H. (2004). The Australian Die Casting industry in a lighter, greener future. 12th Die Casting Conference of the Australian Die Casting Assn, Melbourne, Australia, 28-31 March 2004. Australia: Australian Die Casting Association.
Barnett, R. S., Taylor, J. A. and St John, D. H. (2004). The influence of hydrogen on the hot tearing suseptibility of aluminium-silicon alloys. Proceedings of the TMS 133rd Annual Meeting & Exhibition, North Carolina, USA, 15-18 March 2004. USA: The Minerals, Metals and Materials Society.
Hildebrand, Zoë C.G., Qian, Ma, StJohn, David H. and Frost, Malcolm T. (2004). Influence of zinc on the soluble zirconium content in magnesium and the subsequent grain refinement by zirconium. TMS 2004: 133rd Annual Meeting and Exhibition, Charlotte, North Carolina, U.S.A., 14-18 March 2004. Warrendale, PA, U.S.A.: Minerals, Metals & Materials Society (TMS).
St John, D. H. and Easton, M. (2004). Factors affecting the development of a fine grained solidification microstructure in aluminium alloys. 133rd TMS Annual Meeting & Exhibition, Charlotte, USA, 14-18 March 2004. Warrendale, PA., USA: TMS, the Minerals, Metals & Materials Society.
Easton, M., St John, D. H. and Sweet, E. (2004). Reducing the cost of grain refiner additions to VDC castings. 133rd TMS Annual Meeting & Exhibition, Charlotte, North Carolina, USA, 14-18 March 2004. Warrendale, PA., USA: TMS, the Minerals, Metals & Materials Society.
H.Wang H.WangH.Wang H.WangH.https://api.elsevier.com/content/author/author_id/56820338700 (2004). Controlled nucleation method for formation of semisolid feedstock.
Nave, M. D., Dahle, A. K. and StJohn, D. H. (2003). Method for determining reaction rate of mild steel containers during melting of magnesium-aluminium alloys and effect of aluminium content on directionally solidified microstructures. Maney Publishing. doi: 10.1080/13640461.2003.11819619
Dunlop, Gordon, St John, David and Frost, Malcolm (2003). The AMC-CAST alliance for advanced magnesium research and development. Osaka International Conference on Platform Science and Technology for Advanced Magnesium Alloys, Osaka, Japan, 26-30 January 2003. Uetikon, Zürich: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.419-422.565
St John, D. H. (2003). Automotive applications for light metals. The Future of the Motor Car! Emerging Transport Technology Coe, Adelaide, Australia, 28-29 October 2003.
Easton, M., St John, D. H., Sweet, L. and Couper, M. J. (2003). Optimising the cost of grain refinement by separate TiB2 and Ti additions to wrought aluminium alloys. 8th Aluminium Cast House Technology Conference, Brisbane, Australia, 14-17 September 2003. USA: TMS.
Bettles, C.J., Beste, F., St John, D. H. and Frost, M. (2003). The lightweight concept engine: A novel crankcase design with a new magnesium alloy. The First International Light Metals Technology Conference 203, Brisbane, Australia, 18-20 September 2003. Australia: CRC for CAST Metals Manufacturing.
Jia, J.X., Song, G., Atrens, A., St John, D. H. and Chandler, G. A. (2003). Prediction and experimental measurement of galvanic corrosion for a magnesium-steel couple in corrosive water. The First International Light Metals Technology Conference 203, Brisbane, Australia, 18-20 September 2003. Australia: CRC for CAST Metals Manufacturing.
Song, G., Atrens, A., Jia, J.X. and St John, D. H. (2003). Modeling and Experimental Study of the Galvanic Corrosion of AZ91D Magnesium Alloy in contact with Steel in NaC1 solution. 13th Asian-Pacific Corrosion Control Conference, Japan, 16-21 November 2003. Japan: Osaka University.
Wang, H., Davidson, C. J. and St John, D. H. (2003). Semi-solid casting of A356 alloy produced by controlled pouring. Light Metals Technology Conference 2003, Brisbane, Australia, 18-20 September 2003. Brisbane: CRC for Cast Metals Manufacturing (CAST).
Qian, Ma, StJohn, D. H., Frost, M. T. and Barnett, R. M. (2003). Grain refinement of pure magnesium using rolled zirmax master alloy (Mg-33.3ZR). Magnesium Technology 2003, San Diego, California, USA, 2-6 March, 2003. Warrendale, Pa. USA: The Minerals, Metals & Materials Society.
Dour, G., Dargusch, M. S., Davidson, C. J., Nef, A. and St John, D. H. (2003). Development of a non intrusive heat transfer coefficient gauge and its application to high pressure die casting. Light Metals Technology Conference 2003, Brisbane, Australia, 18-20 September 2003. Brisbane: CRC for Cast Metals Manufacturing (CAST).
Barnett, R. S., Taylor, J. A. and St John, D. H. (2003). A method for reducing hot tearing in 356 alloy air-intake manifolds. Light Metals Technology Conference 2003, Brisbane, Australia, 18-20 September 2003. Brisbane: CRC for Cast Metals Manufacturing (CAST).
Hildebrand, Z. C., Qian, Ma, St John, D. H. and Frost, M. T. (2003). Dissolution of Zirconium as AM-Cast in Magnesium. Light Metals Technology Conference 2003, Brisbane, Australia, 18-20 September 2003. Brisbane: CRC for Cast Metals Manufacturing (CAST).
Cao, P., Qian, Ma, St John, D. H. and Frost, M. T. (2003). Influence of the Uptake of Iron on the Grain Refinement of Pure Magnesium by Zirconium. Light Metals Technology Conference 2003, Brisbane, Australia, 18 - 20 September, 2003. Brisbane, Australia: CRC for Cast Metals Manufacturing (CAST).
Cao, P., Qian, Ma, StJohn, D. H. and Frost, M. T. (2003). Effect of the uptake of iron on the grain refinement of pure magnesium by zirconium. 1st Light Metals Technology Conference, Brisbane, Australia, 18-20 September, 2003. Brisbane, Australia: CAST.
Bettles, Colleen, Forwood, Chris, Jones, Darryl, Griffiths, John, Frost, Malcolm, St. John, David, Qian, Ma, Song, Guangling and Nie, Jian-Feng (2003). Amc-Sc1: A new magnesium alloy suitable for powertrain applications. SAE 2003 World Congress, Detroit, MI, United States, 16-18 April 2003. Warrendale, PA, United States: SAE International. doi: 10.4271/2003-01-1365
Dinnis, C., Taylor, John A., Dahle, Arne K., St John, David H. and Schneider, W. (2003). The role of manganese and iron in porosity formation in Al-Si foundry alloys. Proceedings of the 42nd Annual Conference of Metallurgists, Pennsylvannia, U.S.A., 24 - 27 August, 2003. Pennsylvannia, USA: TMS.
Binney, M. N., StJohn, D. H., Dahle, A. K., Taylor, J. A., Burhop, E. C. and Cooper, P. S. (2003). Grain refinement of secondary aluminium-silicon casting alloys. TMS2003: 132nd Annual International Meeting & Exhibition, San Diego, CA, U.S.A., 2-6 March 2003. Hoboken, NJ, U.S.A.: John Wiley & Sons.
St John, D. H., Dahle, A. K., Abbott, T., Nave, M. D. and Qian, Ma (2003). Solidification of cast magnesium alloys. Magnesium Technology 2003, San Diego, California, USA, 2-6 March, 2003. Warrendale, Pa. USA: The Minerals, Metals & Materials Society.
Qian, Ma, StJohn, D. H. and Frost, M. T. (2003). Zirconium alloying and grain refinement of magnesium alloys. Magnesium Technology 2003, San Diego, California, USA, 2-6 March 2003. Warrendale, Pa. USA: The Minerals, Metals & Materials Society.
Qian, Ma, St. John, David H. and Frost, Malcolm T. (2003). Effect of soluble and insoluble zirconium on the grain refinement of magnesium alloys. Second Osaka International Conference on Platform Science and Technology for Advanced Magnesium Alloys, Osaka, Japan, 26-30 January 2003. Zurich, Switzlerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.419-422.593
Viano, D. M., St John, D. H., Caceres, C. H. and Grandfield, J. F. (2003). Hot tearing of aluminium - copper alloys. Light Metals Technology Conference 2003, Brisbane, Qld, Australia, 18-20 September, 2003. Brisbane, Qld, Australia: CRC for Cast Metals Manufacturing (CAST).
Bettles, Colleen Joyce, Forwood, Christopher, StJohn, David, Frost, Malcolm, Jones, Darryl, Qian, Ma, Song, Guangling, Griffiths, John and Nie, Jian Feng (2003). AMC-SCI: An elevated temperature magnesium alloy suitable for precisiion sand casting of powertrain components. Magnesium Technology 2003, San Diego, California, 2-6 March, 2003. Warrendale, Pa. USA: The Minerals, Metals & Materials Society.
St John, D. H. (2003). The CAST CRC - A light metals partnership between industry and R&D providers. Light Metals Technology Conference 2003, Brisbane, Australia, 18-20 September 2003. Brisbane: CRC for Cast Metals Manufacturing (CAST).
Hildebrand, Zoe, Qian, Ma, StJohn, D. H. and Frost, M. T. (2003). Dissolution of zirconium as zirCAST in molten magnesium. 1st Light Metals Technology Conference, Brisbane, QLD Australia, 18-20 September 2003. Brisbane, QLD Australia: CAST.
Wang, H., Davidson, C. J., Taylor, J. A. and StJohn, D. H. (2002). Semisolid casting of AlSi7Mg0.35 alloy produced by low-temperature pouring. Aluminium Alloys 2002 Their Physical and Mechnaical Properties: Proceedings of the 8th International Conference ICAA8, , , July 2, 2002-July 5, 2002.
Boot, Dave, Cooper, Paul, StJohn, David H. and Dahle, Arne K. (2002). A comparison of grain refiner master alloys for the foundry.
Taylor, J. A., St John, D. H. and Bainbridge, I. F. (2002). Cooperative R&D for the aluminium casthouse. 1st International Conference on Aluminium Casthouse Technology (Al), Mumbai, India, 1-4 December, 2002. Australia: (NCS) Australia.
Boot, D, Cooper, P, St John, D. H. and Dahle, A. K. (2002). A comparsion of grain refiner master alloys for the foundry. TMS Annual Meeting, 2002, Seattle, WA, USA, 17-21 February 2002. Warrendale, PA, USA: The Minerals, Metals and Materials Society.
Taylor, JA and StJohn, DH (2002). A cooperative process for conducting R&D in the alumnium casthouse products sector. 131st TMS Annual Meeting, Seattle Wa, Feb 17-21, 2002. WARRENDALE: MINERALS, METALS & MATERIALS SOC.
Yao, X., Davidson, C. J., Dahle, A. K. and St John, D. H. (2002). Modelling of microstructure formation and evolution during solidification. United Kingdom: Casting Technology International. doi: 10.1080/13640461.2003.11819486
Wang, H., Davidson, C. J., Taylor, J. A. and St John, D. H. (2002). Semisolid casting of AlSi7Mg0.35 alloy produced by low-temperature pouring. 8th International Conference on Aluminium Alloys, Cambridge, England, 2-5 July, 2002. Aedermannsdorf, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.396-402.143
Qian, Ma, StJohn, D. H. and Frost, M.T. (2002). Zirconium alloying and grain refinement of magnesium alloys with zirmax. Australia-Japan Workshop on Advancements in Magnesium Alloys and Processes, Brisbane, Noosa and Central Queensland, 23-26 January, 2002.
Qian, Ma, St John, David, Maloney, Sally K. and Couper, Malcolm J. (2002). As-Cast Microstructure in VDC Cast AA 6082 Billet. 8th International Conference of Aluminium Alloys, Cambridge, United Kingdom, 2-5 July 2002. Pfaffikon, Switzerland: Trans Tech. doi: 10.4028/www.scientific.net/MSF.396-402.191
Taylor, J. A. and St John, D. H. (2002). A cooperative process for conducting R&D in the aluminium casthouse products sector. 131st TMS Annual Meeting - Light Metals Symposium, Seattle, WA, USA, 17-21 February 2002. Warrendale, PA, USA: The Mineras, Metals and Materials Society.
Song, G., Atrens, A. and St John, D. H. (2001). An hydrogen evolution method for the estimation of the corrosion rate of magnesium alloys. Magnesium Technology 2001, New Orleans, USA, 11-15 Feb 2001. Warrendale, Pennsylvannia, USA: TMS. doi: 10.1002/9781118805497.ch44
Taylor, J. A., Wang, H., St John, D. H. and Bainbridge, I (2001). Anomalous grain coarsening behaviour in grain-refined aluminium alloys cast using low superheat. 130th TMS Annual Meeting - Light Metals Symposium, New Orleans, LO, USA, 11-15 Feb 2001. Warrendale, PA, USA: The Minerals, Metals and Materials Society.
McDonald, S., Dahle, A. K., Taylor, J. A. and St John, D. H. (2001). Eutectic solidification in Sr-modified hypoeutectic Al-Si alloys. Biennial Conference of Institute of Materials Engineering Australia, Melbourne, Vic, 23-26 Sept 2001. Melbourne: Institute of Materials Engineering Australia.
Easton, MA and StJohn, DH (2001). The effect of alloy content on the grain refinement of aluminium alloys. 130th TMS Annual Meeting, New Orleans La, Feb 11-15, 2000. WARRENDALE: MINERALS, METALS & MATERIALS SOC.
St.John D.H. and Easton M.A. (2001). Recent developments in the prediction of grain refiner performance. 7th Australian Asian Pacific Conference, Hobart Australia, Sep 23-26, 2001. WARRENDALE: MINERALS, METALS & MATERIALS SOC. doi: 10.1002/9781118806364.ch14
Nave, M., Dahle, A. K. and St John, D. H. (2000). Eutectic growth morphologies in magnesium-aluminium alloys. TMS Annual Meeting 2000, Nashville, TN, USA, 12-16 March 2000. Warrendale, PA, USA: The Minerals, Materials & Material Society. doi: 10.1002/9781118808962.ch33
Nave, M., Dahle, A. K. and St John, D. H. (2000). The role of zinc in the eutectic solidification of magnesium-aluminium-zinc alloys. TMS Annual Meeting 2000, Nashville, TN, USA, 12-16 March 2000. Warrendale, PA, USA: The Minerals, Metals & Materials Society.
McDonald, S., Nogita, K., Dahle, A. K., Taylor, J. A. and St John, D. H. (2000). Eutectic solidification and porosity formation in Al-Si alloys: the role of strontium. 104th AFS Casting Congress, Pittsburgh, PA, USA, 8-11 April 2000. Des Plaines, Illinois, USA: American Foundrymen's Society.
Tate, B., Farnsworth, D. J., St John, D. H., Taylor, J. A. and Barnett, M. R. (2000). Opportunities for heat treatment optimisation of cast aluminium automotive components. Die Casting 2000, Melbourne, Australia, 3-6 September, 2000. Melbourne: Australian Die Casting Association (ADCA).
Taylor, J. A., Lanham, B. W., Ricketts, N. J. and St John, D. H. (2000). How to take up the magnesium challenge - a road map for the journey. Mellenium Meltdown, Christchurch, New Zealand, 27-30 August, 2000. Australian Foundary Institute (AFI).
McDonald, S. D., Dahle, A. K., Taylor, J. A., St John, D. H. and Zindel, J. W. (2000). Microstructural evolution of an Al-Si-Mg foundry alloy during solidification. Die Casting 2000, Melbourne, Australia, 3 - 6 September, 2000. Melbourne: Australian Die Casting Assocation (ADCA).
Otte, M., McDonald, S., Taylor, J. A., St John, D. H. and Schneider, W. E. (2000). Controlling porosity-related casting rejects: Understanding the role of iron in Al-Si alloys. 103rd AFS Casting Congress, St Louis, MO, USA, 13-16 March 1999. Des Plaines, Illinois, USA: American Foundrymen's Society.
Tate, B., Farnsworth, D. J., St John, D. H., Taylor, J. A. and Barnett, M. R. (2000). Heat treatment optimisation of cast aluminium automotive components. Milenium Meltdown, Christchurch, New Zealand, 27-30 August, 2000. Australian Foundy Institute (AFI).
St John, D. H. (2000). The role of solidification in determining the quality of Al and Mg castings. Joint Australia-Lorea Workshop on Light Alloys, Cheju, Korea, 25-26 May 2000. Pohang, Korea: KOSEF & Australia Academy of Science.
Lee, Y., Dahle, A. K. and St John, D. H. (2000). Grain size control in magnesium by the addition of solute elements. Joint Australia-Korea Workshop on Lightt Alloys, Cheju, Korea, 25-26 May 2000. Pohang, Korea: KOSEF and Australia Academy of Science.
Dahle, A. K., Hutt, J., Lee, Y. and St John, D. H. (2000). Grain formation in hypoeutectic Al-Si alloys. 103rd AFS Casting Congress, St Louis, MO, USA, 13-16 March 1999. Des Plaines, Ill, USA: American Foundrymen's Society.
Lee, Y., Dahle, A. K. and St John, D. H. (2000). Grain refinement of magnesium. TMS Annual Meeting 2000, Nashville, TN, USA, 12-16 March 2000. Warrendale, PA, USA: The Minerals, Metals & Metals Society.
Wang, H, StJohn, DH, Davidson, CJ and Couper, MJ (2000). Comparison of the semisolid shear behaviour of Al-7Si-0.35Mg alloys produced by two casting methods. 3rd International Conference on Solidification and Gravity (SG 99), Miskolc Lillafured Hungary, Apr 25-29, 1999. ZURICH-UETIKON: TRANS TECH PUBLICATIONS LTD. doi: 10.4028/www.scientific.net/MSF.329-330.449
Dahle, A. K. and St John, D. H. (1999). The challenges for the manufacture of magnesium components. IMEA Sydney Branch 1999 Seminar, Sydney, 19 October 1999. Parkville, Vic., Aust.: Institute of Materials Engineering.
St John, D. H., Dahle, A. K. and Instone, S. S. (1999). CAST's solidification researcch relevant to DC casting. Aluminium Casthouse Technology, 6th Australian Asian Pacific Conference, Sydney, 26-29 July 1999. Warrendale, PA, USA: Minerals, Metals & Materials Society / AIME.
Dahle, A. K. and St John, D. H. (1999). The origin of banded defects in high pressure die cast magnesium. 20th International Die Casting Congress & Exposition, Cleveland, OH, USA, 1-4 November 1999. Rosemont, IL, USA: North American Die Casting Association.
Otte, MO, Mcdonald, SD, Taylor, JA, St John, DH and Schneider, W (1999). Controlling porosity-related casting rejects: Understanding the role of iron in Al-Si alloys. 103rd Annual Meeting of the American-Foundrymen's-Society, St Louis Mo, Mar 13-16, 1999.
Hutt, J., Dahle, A. K., Lee, Y. and St John, D. H. (1999). The effects of growth restriction and effective nucleant potency on grain size and morphology in Al-Si and Al-Cu alloys. Light Metals 1999, San Diego, CA, USA, 28 February - 4 March 1999. Warrendale, P.A., USA: Minerals, Metals & Materials Society (TMS).
Sequeira, W. P., Murray, M. T., Dunlop, G. L. and StJohn, D. H. (1997). Effect of section thickness and gate velocity on the microstructure and mechanical properties of high pressure die cast magnesium alloy AZ91D. Proceedings of the 1997 TMS Annual Meeting, , , February 9, 1997-February 13, 1997. Minerals, Metals & Materials Soc (TMS).
Zhang D.L. and St John D.H. (1996). Effect of magnesium and copper content on the mechanical properties of cast Al-7wt%Si-Mg alloys. Proceedings of the TMS Materials Week'95 Symposium, Cleveland, OH, USA, October 29, 1995-November 2, 1995. WARRENDALE: MINERALS, METALS & MATERIALS SOC.
XU, LQ, CLOUGH, S, HOWARD, P and STJOHN, D (1995). LABORATORY ASSESSMENT OF THE EFFECT OF WHITE LAYERS ON WEAR-RESISTANCE FOR DIGGER TEETH. 10th International Conference on Wear of Materials, Boston Ma, Apr 09-13, 1995. LAUSANNE 1: ELSEVIER SCIENCE SA LAUSANNE. doi: 10.1016/0043-1648(95)90015-2
Taylor, J., St John, D. and Schaffer, G. (1995). Aluminium alloys and processing problems: Castability of alloys used for high integrity castings. 4th Australasian/Asian/Pacific Conference on Aluminium Cast House Technology - Theory and Practice, Sydney Australia, 3-6 July 1995.
XU, LQ, VOSE, C and STJOHN, D (1993). ABRASIVE WEAR STUDY OF SELECTED WHITE CAST IRONS AS LINER MATERIALS FOR THE MINING-INDUSTRY. 9Th International Conf On Wear of Materials, San Francisco Ca, Apr 13-16, 1993. LAUSANNE 1: ELSEVIER SCIENCE SA LAUSANNE. doi: 10.1016/0043-1648(93)90083-X
Hay, S. and St John, D. H. (1993). Models of gas-solid particle erosion of metals and alloys. Proceedings of the 1st Conference on Dynamic Loading in Manufacturing and Service, , , February 9, 1993-February 11, 1993. Publ by IE Aust.
St John, D.H., Matthew, S.P. and Hayes, P.C. (1992). Conditions for the formation of dense and porous iron on reduction of wustite in H2/H2O and CO/CO2 gas mixtures. International Symposium on Iron and Steelmaking, Toronto,
HAY, S, NAIRN, JD and STJOHN, DH (1991). SECONDARY PRECIPITATE GROWTH IN MG-PSZ. International Ceramic Conf ( Austceram 90 ) - Ceramics Technology : Sharing the Knowledge, Australia, 1990. ZURICH: TRANS TECH PUBLICATIONS LTD. doi: 10.4028/www.scientific.net/KEM.53-55.744
Hamlyn-Harris, James, St. John, D. H. and Sood, D. K. (1986). COMPARATIVE STUDY OF THE CRYSTALLIZATION OF Ni-P AMORPHOUS ALLOYS PRODUCED BY ION-IMPLANTATION AND MELT SPINNING. Beam-Solid Interactions and Phase Transformations., , , Materials Research Soc.
St. John, D. H., Hogan, L. M. and Eady, J. A. (1986). INFLUENCE OF MICROSTRUCTURES ON THE TENSILE PROPERTIES OF Al-Ti ALLOYS. Pergamon Press (International Series on the Strength and Fracture of Materials and Structures).
St John, D. H., Matthew, S. P. and Hayes, P. C. (1985). Microstructural changes during the reduction of wustite. AusIMM Annual Conference, Brisbane QLD Australia, 1985. AusIMM.
St. John, D. H., Matthew, S. P. and Hayes, P. C. (1984). MICROSTRUCTURAL CHANGES DURING THE REDUCTION OF WUSTITE. Extractive Metallurgy Symposium., , , Australasian Inst of Mining & Metallurgy.

Thesis

St. John, David Henry (1976). A comparative study of the Al-Al(3)Ti and Cd-Cd(3)Ag (epsilon) peritectic systems. PhD Thesis, School of Engineering, The University of Queensland. doi: 10.14264/uql.2015.264

Areas of research

Advanced materials processing and manufacturing