School of Mechanical & Mining Engineering School of Mechanical & Mining Engineering
Site search

Dr Carlos Caceres

Honorary Associate Professor
School of Mechanical and Mining Engineering

Publications

Book Chapters (3)
Journal Articles (104)
Conference Papers (55)

Book Chapters

Blake, A. H. and Cáceres, C. H. (2014). Solid Solution Effects on the Tensile Behaviour of Concentrated Mg-Zn Alloys. Essential Readings in Magnesium Technology. (pp. 263-267) London, United Kingdom: Wiley Blackwell. doi: 10.1002/9781118859803.ch43
Viano, David, Stjohn, David, Grandfield, John and Cáceres, Carlos (2013). Hot tearing in aluminium-copper alloys. Essential readings in light metals. (pp. 895-899) Hoboken, NJ USA: John Wiley and Sons. doi: 10.1002/9781118647783.ch112
Abbott, T., Caceres, C. H. and Easton, M. (2003). Design with magnesium: Alloys, properties and casting processes. Handbook of metallurgical process design. (pp. 487-538) edited by George E. Totten, Kiyoshi Funatani and Lin Xie. New York, USA: Marcel Dekkers Publishers.

Journal Articles

Nagarajan, D. and Cáceres, C. H. (2018). The friction stress of the hall–petch relationship of pure Mg and solid solutions of Al, Zn, and Gd. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 49 (11), 5288-5297. doi: 10.1007/s11661-018-4810-1
Nagarajan, D., Ren, X. and Caceres, C. H. (2017). Anelastic behavior of Mg-Al and Mg-Zn solid solutions. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 696 (7), 387-392. doi: 10.1016/j.msea.2017.04.069
Nagarajan, Devarajan, Caceres, Carlos H. and Griffiths, John R. (2016). Grain size hardening rffects in Mg-Gd solid solutions. Metallurgical and Materials Transactions A, 47 (11), 5401-5408. doi: 10.1007/s11661-016-3686-1
Abaspour, Saeideh, Zambelli, Victor, Dargusch, Matthew and Caceres, Carlos H. (2016). Atomic size and local order effects on the high temperature strength of binary Mg alloys. Materials Science and Engineering: A, 673, 114-121. doi: 10.1016/j.msea.2016.07.019
Abaspour, Saeideh and Caceres, Carlos H. (2016). High temperature strength and stress relaxation behavior of dilute binary Mg alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 47 (3), 1313-1321. doi: 10.1007/s11661-015-3292-7
Abaspour, Saeideh and Caceres, Carlos H. (2015). Thermodynamics-based selection and design of creep-resistant cast Mg alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 46 (12), 5972-5988. doi: 10.1007/s11661-015-3128-5
Zhang, Bao, Yang, Kun V., Nagasekhar, Anumalasetty V., Caceres, Carlos H. and Easton, Mark (2014). Deformation behavior of the percolating eutectic intermetallic in HPDC and squeeze-cast Mg alloys. JOM, 66 (10), 2086-2094. doi: 10.1007/s11837-014-1147-0
Yang, Kun V., Caceres, Carlos H. and Easton, Mark A. (2014). Strengthening micromechanisms in cold-chamber high-pressure Die-Cast Mg-Al alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45 (9), 4117-4128. doi: 10.1007/s11661-014-2326-x
Zhang, Bao, Nagasekhar, Anumalasetty V., Tao, Xiaoma, Ouyang, Yifang, Caceres, Carlos H. and Easton, Mark (2014). Strengthening by the percolating intergranular eutectic in an HPDC Mg-Ce alloy. Materials Science and Engineering A, 599, 204-211. doi: 10.1016/j.msea.2014.01.074
Zhang, Bao, Gavras, Serge, Nagasekhar, Anumalasetty V., Caceres, Carlos Horacio and Easton, Mark A. (2014). The strength of the spatially interconnected eutectic network in HPDC Mg-La, Mg-Nd, and Mg-La-Nd alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45 (10), 4386-4397. doi: 10.1007/s11661-014-2416-9
Yang, K. Vanna, Cáceres, C. H. and Easton, M. A. (2013). A microplasticity-based definition of the skin in HPDC Mg-Al alloys. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 580, 355-361. doi: 10.1016/j.msea.2013.05.018
Yang, K. Vanna, Easton, M. A. and Cáceres, C. H. (2013). The development of the skin in HPDC Mg-Al alloys. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 580, 191-195. doi: 10.1016/j.msea.2013.05.017
Zhang, Bao, Nagasekhar, Anumalasetty V., Sivarupan, Tharmalingam and Caceres, Carlos H. (2013). Deformation behavior of the percolating intermetallic microstructure of high pressure die cast AZ91 alloy. Advanced Engineering Materials, 15 (11), 1059-1067. doi: 10.1002/adem.201300138
Sivarupan, Tharmalingam, Caceres, Carlos H. and Taylor, John A. (2013). Alloy composition and dendrite arm spacing in Al-Si-Cu-Mg-Fe alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44A (9), 4071-4080. doi: 10.1007/s11661-013-1768-x
Sivarupan, Tharmalingam, Caceres, Carlos H. and Taylor, John Andrew (2013). Effect of Si content on the size of Fe-rich intermetallic particles in Al-xSi-0.8Fe alloys. Materials Science Forum, 765, 107-111. doi: 10.4028/www.scientific.net/MSF.765.107
Yang, Kun Vanna, Easton, Mark A. and Caceres, Carlos H. (2013). The effect of solidification dynamics on the formation of the skin in die cast Mg-Al and Mg-RE alloys. Advanced Engineering Materials, 15 (4), 302-307. doi: 10.1002/adem.201200188
Yang, K. Vanna, Caceres, C. H., Nagasekhar, A. V. and Easton, M. A. (2012). The skin effect and the yielding behavior of cold chamber high pressure die cast Mg-Al alloys. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 542, 49-55. doi: 10.1016/j.msea.2012.02.029
Yang, K. Vanna, Caceres, C. H., Nagasekhar, A. V. and Easton, M. A. (2012). Low-strain plasticity in a high pressure die cast Mg-Al alloy. Modelling and Simulation in Materials Science and Engineering, 20 (2) 024010, 1-9. doi: 10.1088/0965-0393/20/2/024010
Caceres, C. H., Mann, Gemma E. and Griffiths, J. R. (2011). Grain size hardening in Mg and Mg-Zn solid solutions. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 42A (7), 1950-1959. doi: 10.1007/s11661-010-0599-2
Yang, K. V., Caceres, C. H., Easton, M. A. and Gibson, M. A. (2011). The skin effect in a high pressure die cast Mg-La alloy. Kovove Materialy, 49 (3), 207-212. doi: 10.4149/km_2011_3_207
Nagasekhar, A. V., Caceres, C. H. and Kong, C. (2010). 3D characterization of intermetallics in a high pressure die cast Mg alloy using focused ion beam tomography. Materials Characterization, 61 (11), 1035-1042. doi: 10.1016/j.matchar.2010.06.007
Wang, Q. G., Praud, M., Needleman, A., Kim, K. S., Griffiths, J. R., Davidson, C. J., Caceres, C. H. and Benzerga, A. A. (2010). Size effects in aluminium alloy castings. Acta Materialia, 58 (8), 3006-3013. doi: 10.1016/j.actamat.2010.01.032
Nagasekhar, A.V., Easton, M.A. and Caceres, C.H. (2009). Solute content and the grain microstructure of high pressure diecast magnesium-aluminium alloys. Advanced Engineering Materials, 11 (11), 912-919. doi: 10.1002/adem.200900175
Caceres, CH (2009). Transient environmental effects of light alloy substitutions in transport vehicles. MATERIALS & DESIGN, 30 (8), 2813-2822. doi: 10.1016/j.matdes.2009.01.027
A.V.Nagasekhar, C.H.Caceres and M.Easton (2009). Role of solute content on the intermetallic structure development in HPDC Mg-Al Binary Alloys. Materials Science Forum, 618-619, 479-482. doi: 10.4028/www.scientific.net/MSF.618-619.479
Blake, A. H. and Cáceres, C. H. (2008). Solid-solution hardening and softening in Mg-Zn alloys. Materials Science and Engineering A, 483-484 (1-2 C), 161-163. doi: 10.1016/j.msea.2006.10.205
Caceres, C. H. and Lukac, P. (2008). Strain hardening behaviour and the Taylor factor of pure magnesium. Philosophical Magazine, 88 (7), 977-989. doi: 10.1080/14786430801968611
Caceres, C. H., Lukac, P. and Blake, A. (2008). Strain hardening due to {10 12} twinning in pure magnesium. Philosophical Magazine, 88 (7), 991-1003. doi: 10.1080/14786430701881211
Trojanova, Z., Caceres, C.H., Lukac, P. and Cizek, L. (2008). Serrated flow in AZ91 magnesium alloy in tension and compression. Kovove Materialy, 46 (5), 249-256.
Cáceres, C. H. and Blake, A. H. (2007). On the strain hardening behaviour of magnesium at room temperature. Materials Science and Engineering A, 462 (1-2), 193-196. doi: 10.1016/j.msea.2005.12.113
Mann, G.E., Sumitomo, T., Cáceres, C.H. and Griffiths, J.R. (2007). Reversible plastic strain during cyclic loading–unloading of Mg and Mg–Zn alloys. Materials Science And Engineering A, 456 (1-2), 138-146. doi: 10.1016/j.msea.2006.11.160
Caceres, C.H. (2007). Economical and environmental factors in light alloys automotive applications. Metallurgical And Materials Transactions A-physical Metallurgy And Materials Science, 38A (7), 1649-1662. doi: 10.1007/s11661-007-9156-z
Trojanova, Z. and Caceres, C.H. (2007). On the strain to the onset of serrated flow in a magnesium alloy. Scripta Materialia, 56 (9), 793-796. doi: 10.1016/j.scriptamat.2006.12.048
Caceres, C. H. (2006). Particle cracking and the tensile ductility of a model Al-Si-Mg composite system. Aluminum Transactions, 1 (1), 1-13.
Caceres, C. H. and Taylor, J. A. (2006). Enhanced ductility in Al-Si-Cu-Mg foundry alloys with high Si content. Metallurgical And Materials Transactions. B, Process Metallurgy And Materials Processing Science, 37 (6), 897-903. doi: 10.1007/BF02735011
Caceres, CH, Poole, WJ, Bowles, AL and Davidson, CJ (2005). Section thickness, macrohardness and yield strength in high-pressure diecast magnesium alloy AZ91. Materials Science And Engineering A-structural Materials Properties Microstructure And Processing, 402 (1-2), 269-277. doi: 10.1016/j.msea.2005.04.024
Caceres, C. H., Griffiths, J. R., Pakdel, A. R. and Davidson, C. J. (2005). Microhardness mapping and the hardness-yield strength relationship in high-pressure diecast magnesium alloy AZ91. Materials Science And Engineering A, 402 (1-2), 258-268. doi: 10.1016/j.msea.2005.04.042
Corby, C., Cáceres, C. H. and Lukáč, P. (2004). Serrated flow in magnesium alloy AZ91. Materials Science and Engineering A, 387-389 (1-2 SPEC. ISS.), 22-24. doi: 10.1016/j.msea.2004.01.077
Lucas, A. M., Caceres, C. H. and Taylor, J. A. (2004). The effect of Si content on the size of -Al5 FeSi intermetallics in Al-Si-Cu-Mg casting alloys. Materials Forum - Aluminium Alloys Their Physical and Mechanical Properties, 28 (2004), 1216-1221.
Atrens, A., Truss, R. W., Dahle, A., Schaffer, G. B., St John, D. H., Caceres, C. and Gates, J. D. (2004). Graduate attributes in relation to curriculum design and delivery in a Bachelor of Materials Engineering Programme. International Journal of Engineering Education, 20 (5), 834-848.
Johannesson, B and Caceres, CH (2004). Effect of Si additions and heat treatment on the mechanical behaviour of an Al-5Mg casting alloy. International Journal of Cast Metals Research, 17 (2), 94-98. doi: 10.1179/136404604225017483
Mathis, K, Trojanova, Z, Lukac, P, Caceres, CH and Lendvai, J (2004). Modeling of hardening and softening processes in Mg alloys. Journal of Alloys And Compounds, 378 (2004), 176-179. doi: 10.1016/j.jallcom.2003.10.098
Cáceres , C. H., Sumitomo, T. and Veidt, M. (2003). Pseudoelastic behaviour of cast magnesium AZ91 alloy under cyclic loading-unloading. Acta Materialia, 51 (20), 6211-6218. doi: 10.1016/S1359-6454(03)00444-0
Wang, Q. G., Caceres, C. H. and Griffiths, J. R. (2003). Damage by eutectic particle cracking in aluminum casting alloys A356/357. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 34 (12), 2901-2912. doi: 10.1007/s11661-003-0190-1
Cáceres, C. H. (2003). A phenomenological approach to the Quality Index of AI-Si-Mg casting alloys Une approche phénoménologique de l'Indice de Qualité des alliages de fondene Al-Si-Mg. Fonderie-Fondeur d'Aujourd'hui (229), 12-25.
Bowles, A. and Caceres, C. H. (2003). Anomalous hardness behaviour of high pressure die-cast Mg-Al alloys. Metallurgical Science &Technology, 21 (1), 25-26.
Caceres, C. H., Svensson, I. L. and Taylor, J. A. (2003). Strength-ductility behaviour of Al-Si-Cu-Mg casting alloys in T6 temper. International Journal of Cast Metals Research, 15 (5), 531-543. doi: 10.1080/13640461.2003.11819539
Caceres, C. H. and Rovera, D. M. (2002). Solid Solution Strengthening in Concentrated Mg-Al alloys. Journal of Light Metals, 1 (3), 151-156. doi: 10.1016/S1471-5317(01)00008-6
Caceres, C. H. and Blake, A. (2002). The strength of concentrated Mg-Zn solid solutions. Physica Status Solidi A-applied Research, 194 (1), 147-158. doi: 10.1002/1521-396X(200211)194:1<147::AID-PSSA147>3.0.CO;2-L
Caceres, C. H. and Poole, W. J. (2002). Hardness and flow strength in particulate metal matrix composites. Materials Science And Engineering A-structural Materials Properties Microstructure And Processing, 332 (1-2), 311-317. doi: 10.1016/S0921-5093(01)01744-0
Caceres, C.H., Davidson, C.J., Griffiths, J.R. and Newton, C.L. (2002). Effects of solidification rate and ageing on the microstructure and mechanical properties of AZ91 alloy. Materials Science And Engineering A-structural Materials Properties Microstructure And Processing, 325 (1-2), 344-355. doi: 10.1016/S0921-5093(01)01467-8
Caceres, C. H., Sumitomo, T. and Veidt, M. (2002). Elastic modulus effects of cast Mg-Al-Zn alloys. Journal of Light Metals, 2 (1), 49-56. doi: 10.1016/S1471-5317(02)00013-5
Caceres, C. H. (2002). Hardness and yield strength in cast Mg-Al alloys. AFS Transactions, 110, 1-7.
Cáceres, C. H., Makhlouf, M., Apelian, D. and Wang, L. (2001). Quality index chart for different alloys and temperatures: a case study on aluminium die-casting alloys. Journal of Light Metals, 1 (1), 51-59. doi: 10.1016/S1471-5317(00)00006-7
Caceres, C. H., Makhlouf, M., Apelian, D. and Wang, L. (2001). Quality index chart for different alloys and temperatures: A cast study on aluminium die-casting alloys. Journal of Light Metals, 1 (1), 51-59.
Caceres, C. H. (2001). Quality index charts for permanent-mould and sand-cast Mg-based alloys. AFS Transactions, 109, 119-126.
Caceres, C. H. (2001). Damage by particle cracking and the quality index of Al-Si-Mg casting alloys. AFS Transactions, 108, 709-712.
Caceres, C. H. (2001). Material properties and process assessment in Mg-Al casting alloys using strength - ductility charts. International Journal of Cast Metals Research, 14 (3), 185-197. doi: 10.1080/13640461.2001.11819437
Caceres, C. H. (2000). Microstructure design and heat treatment selection for casting alloys using the Quality Index. Journal of Materials Engineering and Performance, 9 (2), 215-221. doi: 10.1361/105994900770346178
Caceres, C. H. (2000). Microstructural effects on the strength-ductility relationship of A1-7Si-Mg casting alloys. Materials Science Forum, 331-337, 223-228.
Caceres C.H. (2000). A rationale for the quality index of Al-Si-Mg casting alloys. International Journal of Cast Metals Research, 12 (6), 385-391. doi: 10.1080/13640461.2000.11819376
Cáceres, C. H. (2000). Microstructural effects on the strength-ductility relationship of Al-7Si-Mg casting alloys. Materials Science Forum, 331
Cáceres, C. H. and Barresi, J (2000). Selection of temper and Mg content to optimise the quality index of Al-7Si-Mg casting alloys. International Journal of Cast Metals Research, 12 (6), 377-384. doi: 10.1080/13640461.2000.11819375
Caceres, C. H. (2000). A phenomenological approach to the quality index of Al-Si-Mg casting alloys. International Journal of Cast Metals Research, 12 (6), 367-375. doi: 10.1080/13640461.2000.11819374
Caceres, C. H., Sokolowski, J. and Gallo, P. (1999). Effect of ageing and Mg content on the quality index of two model Al-Cu-Si-Mg alloys. Materials Science and Engineering A, 271 (1-2), 53-61. doi: 10.1016/S0921-5093(99)00128-8
Caceres, C. H., Wang, L., Apelian, D. and Makhlouf, M. (1999). Alloy selection for die castings using the quality index. AFS Transactions, 107, 239-247.
Caceres, C. H., Davidson, C. J., Griffiths, J. R. and Wang, Q. G. (1999). The effect of Mg on the microstructure and mechanical behaviour of two Al-Si-Mg casting alloys. Metallurgical and Materials Transactions A, 30 (10), 2611-2618. doi: 10.1007/s11661-999-0301-8
Caceres, C. H., Din, T., Rashid, A. K. and Campbell, J. (1999). The effect of ageing on the quality index of alloy 201. Materials Science and Technology, 15 (6), 711-716.
Caceres, C. H., Djurdjevic, M. B., Stockwell, T. J. and Sokolowski, J. (1999). The effecct of Cu content on the formation of microporosity in Al-Si-Cu-Mg casting alloys. Scripta Materialia, 40 (5), 631-637. doi: 10.1016/S1359-6462(98)00492-8
Cáceres, C. H. (1998). A rationale for the quality index of Al-Si-Mg casting alloys. International Journal of Cast Metals Research, 10 (5), 293-299. doi: 10.1080/13640461.1998.11819245
Wang, QG and Caceres, CH (1998). The fracture mode in Al-Si-Mg casting alloys. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 241 (1-2), 72-82. doi: 10.1016/S0921-5093(97)00476-0
Flacher, O., Blandin, J. J., Plucknett, K. P., Wilkinson, D. S. and Caceres, C. H. (1997). Effects of porosity on the superplastic properties of submicronic alumina-zirconia composites. Materials Science Forum, 243-245, 411-416.
Cáceres, C. H., Davidson, C. J., Griffiths, J. R., Hogan, L. M. and Wang, Q. G. (1997). Hypoeutectic Al-Si-Mg foundry alloys. Materials Forum, 21, 27-43.
Wang Q.G. and Caceres C.H. (1997). On the strain hardening behaviour of Al-Si-Mg casting alloys. Materials Science and Engineering A, 234-236, 106-109.
Flacher, O, Blandin, JJ, Plucknett, KP, Wilkinson, DS and Caceres, CH (1997). Effects of porosity on the superplastic properties of submicronic alumina-zirconia composites. Superplasticity in Advanced Materials - Icsam-97, 243-2, 411-416.
Sigworth, G. K. and Cáceres, C. H. (1997). Porosity formation in aluminium alloy castings under quasi-directional solidification. International Journal of Cast Metals Research, 9 (6), 331-336. doi: 10.1080/13640461.1997.11819674
Wang Q.G. and Caceres C.H. (1997). Mg effects on the eutectic structure and tensile properties of Al-Si-Mg alloys. Materials Science Forum, 242 (7), 159-164.
Caceres, CH and Selling, BI (1996). Casting defects and the tensile properties of an Al-Si-Mg alloy. Materials Science and Engineering A, 220 (1-2), 109-116. doi: 10.1016/S0921-5093(96)10433-0
Flacher, O, Blandin, JJ, Plucknett, KP, Caceres, CH and Wilkinson, DS (1996). Microstructural aspects of superplastic deformation of Al2O3/ZrO2 laminate composites. Materials Science and Engineering A, 219 (1-2), 148-155. doi: 10.1016/S0921-5093(96)10419-6
Caceres C.H. and Wang Q.G. (1996). Dendrite cell size and ductility of Al-Si-Mg casting alloys: Spear and Gardner revisited. International Journal of Cast Metals Research, 9 (3), 157-162. doi: 10.1080/13640461.1996.11819656
Caceres, CH and Griffiths, JR (1996). Damage by the cracking of silicon particles in an Al-7Si-0.4Mg casting alloy. Acta Materialia, 44 (1), 25-33. doi: 10.1016/1359-6454(95)00172-8
Caceres, CH, Griffiths, JR and Reiner, P (1996). The influence of microstructure on the bauschinger effect in an Al-Si-Mg casting alloy. Acta Materialia, 44 (1), 15-23. doi: 10.1016/1359-6454(95)00171-6
Caceres, CH, Davidson, CJ and Griffiths, JR (1995). The deformation and fracture behaviour of an AlSiMg casting alloy. Materials Science and Engineering A, 197 (2), 171-179. doi: 10.1016/0921-5093(94)09775-5
CACERES, CH (1995). ON THE EFFECT OF MACROPOROSITY ON THE TENSILE PROPERTIES OF THE AL-7-PERCENT-SI-0.4MG CASTING ALLOY. Scripta Metallurgica Et Materialia, 32 (11), 1851-1856. doi: 10.1016/0956-716X(95)00031-P
PLUCKNETT, KP, CACERES, CH and WILKINSON, DS (1994). TAPE CASTING OF FINE ALUMINA-ZIRCONIA POWDERS FOR COMPOSITE FABRICATION. Journal of the American Ceramic Society, 77 (8), 2137-2144. doi: 10.1111/j.1151-2916.1994.tb07109.x
PLUCKNETT, KP, CACERES, CH, HUGHES, C and WILKINSON, DS (1994). PROCESSING OF TAPE-CAST LAMINATES PREPARED FROM FINE ALUMINA-ZIRCONIA POWDERS. Journal of the American Ceramic Society, 77 (8), 2145-2153. doi: 10.1111/j.1151-2916.1994.tb07110.x
Wilkinson, DS, Caceres, CH and Robertson, AG (1991). Damage and Fracture Mechanisms During High-Temperature Creep in Hot-Pressed Alumina. Journal of the American Ceramic Society, 74 (5), 922-933. doi: 10.1111/j.1151-2916.1991.tb04323.x
Robertson, A. Gordon, Wilkinson, David S. and Cáceres, Carlos H. (1991). Creep and Creep Fracture in Hot‐Pressed Alumina. Journal of the American Ceramic Society, 74 (5), 915-921. doi: 10.1111/j.1151-2916.1991.tb04322.x
Caceres, CH and Lescano, DE (1990). The growth of artificial voids during superplastic deformation of a ZnAlCu alloy. Materials Science and Engineering A, 128 (2), 147-154. doi: 10.1016/0921-5093(90)90223-P
Wu, X, Campenni, VD, Caceres, CH and Wilkinson, DS (1989). Effect of Cyclic Deformation On Strain Enhanced Grain-Growth During Superplastic Flow. Materials Science and Technology, 5 (10), 999-1004. doi: 10.1179/mst.1989.5.10.999
Campenni, VD and Caceres, CH (1988). Strain enhanced grain growth at large strains in a superplastic Zn{single bond}Al alloy. Scripta Metallurgica, 22 (3), 359-364. doi: 10.1016/S0036-9748(88)80205-9
Caceres, CH and Silvetti, SP (1987). Cavitation damage in the superplastic Zn-22% Al-0.5% Cu alloy. Acta Metallurgica, 35 (4), 897-906. doi: 10.1016/0001-6160(87)90168-4
Caceres, CH and Rodriguez, AH (1987). Acoustic emission and deformation bands in Al-2.5% Mg and Cu-30% Zn. Acta Metallurgica, 35 (12), 2851-2864. doi: 10.1016/0001-6160(87)90284-7
Wilkinson, DS and Caceres, CH (1986). Mechanism of Plastic Void Growth During Superplastic Flow. Materials Science and Technology, 2 (11), 1086-1092. doi: 10.1179/mst.1986.2.11.1086
Caceres, CH and Wilkinson, DS (1986). Superplastic behavior of a zn-22 pct ai-0.5 pct cu alloy. Metallurgical and Materials Transactions A, 17 (10), 1873-1875. doi: 10.1007/BF02817283
Caceres, CH (1985). Amplitude Measurement in Acoustic-Emission. Review of Scientific Instruments, 56 (8), 1669-1670. doi: 10.1063/1.1138124
Caceres, CH and Wilkinson, DS (1984). Large strain behaviour of a superplastic copper alloy-II. Cavitation and fracture. Acta Metallurgica, 32 (3), 423-434. doi: 10.1016/0001-6160(84)90116-0
Wilkinson, DS and Caceres, CH (1984). On the mechanism of strain-enhanced grain growth during superplastic deformation. Acta Metallurgica, 32 (9), 1335-1345. doi: 10.1016/0001-6160(84)90079-8
CACERES, CH and WILKINSON, DS (1984). LARGE STRAIN BEHAVIOR OF A SUPERPLASTIC COPPER ALLOY .1. DEFORMATION. Acta Metallurgica, 32 (3), 415-422. doi: 10.1016/0001-6160(84)90115-9
Wilkinson, DS and Caceres, CH (1984). An evaluation of available data for strain-enhanced grain growth during superplastic flow. Journal of Materials Science Letters, 3 (5), 395-399. doi: 10.1007/BF00724376
Caceres, CH and Bertorello, HR (1983). Acoustic emission during non-homogeneous flow in Al MG alloys. Scripta Metallurgica, 17 (9), 1115-1120. doi: 10.1016/0036-9748(83)90465-9
Pusiol, DJ, Caceres, CH and Brunetti, AH (1983). Detection of acoustic emission and simultaneous observation of nuclear quadrupole resonance in the α ⇋ β phase transition of paradichlorobenzene. Journal of Physics and Chemistry of Solids, 44 (7), 647-650. doi: 10.1016/0022-3697(83)90111-7
Caceres, CH and Wilkinson, DS (1982). Grain growth at low strain rates in a superplastic Cu alloy. Scripta Metallurgica, 16 (12), 1363-1365. doi: 10.1016/0036-9748(82)90428-8
Caceres, CH, Arneodo, W, Pascual, R and Bertorello, HR (1980). Acoustic emission related to stress induced martensitic transformation in β CuZn. Scripta Metallurgica, 14 (3), 293-297. doi: 10.1016/0036-9748(80)90347-6

Conference Papers

Mulay, R. P., Agnew, S. R. and Caceres, C. H. (2015). In-situ neutron diffraction study of the deformation mechanisms in solutionized Mg-Zn alloys. TMS 2015 144th Annual Meeting and Exhibition, Orlando, FL, United States, 15 - 19 March 2015. Hoboken, NJ, United States: John Wiley & Sons. doi: 10.1002/9781119093428.ch20
Abaspour, Saeideh and Caceres, Carlos H. (2014). The athermal component of the strength of binary Mg solid solutions. Magnesium Technology 2014 - TMS 2014 143rd Annual Meeting and Exhibition, San Diego, United States, 16-20 February 2014. Hoboken, NJ, United States: John Wiley & Sons. doi: 10.1002/9781118888179.ch17
Zhang, Bao, Nagasekhar, Anumalasetty V. and Caceres, Carlos H. (2014). Strengthening due to the percolating eutectic microstructure in squeeze cast MRI230D. Magnesium Technology 2014 - TMS 2014 143rd Annual Meeting and Exhibition, San Diego, United States, 16-20 February 2014. Hoboken, NJ, United States: John Wiley & Sons. doi: 10.1002/9781118888179.ch40
Sivarupan, Tharmalingam, Caceres, Carlos H. and Taylor, John Andrew (2014). Effect of Si and Cu content on the size of intermetallic phase particles in Al-Si-Cu-Mg-Fe alloys. Shape Casting: 5th International Symposium - 2014 TMS 143rd Annual Meeting and Exhibition, San Diego, United States, 16-20 February 2014. Hoboken, NJ, United States: John Wiley & Sons. doi: 10.1002/9781118888100.ch17
Caceres, C. H. and Abaspour, Saeideh (2013). Bounds to hardening by solid solution, precipitation and short range order in Mg binary alloys. Magnesium Technology 2013 - TMS 2013 142nd Annual Meeting and Exhibition, San Antonio, United States, 3-7 March 2013. Hoboken, NJ, United States: John Wiley & Sons. doi: 10.1002/9781118663004.ch37
Zhang, Bao and Caceres, Carlos H. (2013). Modelling microplastic flow in an hpdc Mg-Al alloy. Deformation, Damage, and Fracture of Light Metals and Alloys - TMS 2013 142nd Annual Meeting and Exhibition, San Antonio, United States, 3-7 March 2013.
Abaspour, Saeideh and Caceres, C. H. (2013). Creep Behaviour of Mg Binary Solid Solutions. Magnesium Technology 2013 - TMS 2013 142nd Annual Meeting and Exhibition, San Antonio, United States, 3-7 March 2013. Hoboken, NJ, United States: John Wiley & Sons. doi: 10.1002/9781118663004.ch3
Sivarupan, T., Caceres, C. H. and Taylor, J. A. (2012). Effect of composition on the size of intermetallic phases in Al-Si-Cu-Mg alloy. The First International Conference on Metallic Materials and Processing (ICMMP 2012), Gold Coast, Australia, 8-11 July 2012.
Zhang, Bao, Nagasekhar, Anumalasetty V. and Caceres, Carlos H. (2012). Elastic behavior of the percolating eutectic structure of a high pressure die cast magnesium alloy. 1st International Conference on 3D Materials Science (3DMS), Seven Springs, PA, United States, 08-12 July 2012. Chichester , W Sussex, England: John Wiley & Sons. doi: 10.1007/978-3-319-48762-5_12
Yang, K. Vanna, Caceres, C. H. and Tome, C. N. (2012). The elasto-plastic transition in magnesium alloys. Symposium on Magnesium Technology held during TMS Annual Meeting and Exhibition, Orlando Fl, 11-15 March 2012. Hoboken NJ, United States: John Wiley and Sons. doi: 10.1002/9781118359228.ch24
Nagarajan, D., Caceres, C. H. and Griffiths, J. R. (2012). Anelastic Phenomena in Mg-Al Alloys. International Symposium on Physics of Materials, Prague, Czech Republic, 4-8 September 2011. Warsaw, Poland: Polska Akademia Nauk * Instytut Fizyki. doi: 10.12693/APhysPolA.122.501
Sivarupan,Tharmalingam, Caceres, Carlos H. and Taylor, John A. (2011). Effect of composition on secondary dendrite arm spacing of Al-Si-Cu-Mg (Fe/Mn) alloys for a given cooling rate. 2011 UQ Engineering Posgraduate Research Conference, St Lucia, Brisbane, Australia, 6 June 2011.
Cáceres, Carlos H., Sivarupan, Tharmalingam and Taylor, John A. (2010). Chemical composition issues regarding the ductility of alloy A319. International Conference on Advances in Materials and Manufacturing Processes ICAMMP 2010, Shenzhen, China, 6-8 November 2010.
Yang, K., Nagasekhar, A. V. and Caceres, C. H. (2010). Section thickness and the skin effect in high pressure die cast Mg-Al Alloys. TMS 2010, Seattle, Washington, U.S.A., 24-18 February 2010. Warrendale, PA, USA: The Minerals, Metals & Materials Society (TMS).
Yang, Kun Vanna, Nagasekhar, Anumalasetty Venkata, Lumley, Roger and Caceres, Carlos Horacio (2010). The skin effect in high pressure die casting Al alloys. The 12th International Conference on Aluminium Alloys (ICAA12), Yokohama, Japan, 5-9 September 2010. Tokyo, Japan: The Japan Institute of Light Metals.
Yang, K., Nagasekhar, A. V. and Caceres, C. H. (2010). Section Thickness and the Skin Effect in a High Pressure Die Cast Mg-12%Al Alloy. Magnesium Technology Symposium 2010, Seattle Wa, Feb 14-18, 2010. WARRENDALE: MINERALS, METALS & MATERIALS SOC.
Yang, K., Nagasekhar, A.V. and Caceres, C.H. (2010). The skin effect in a high pressure die cast Mg-9%Al alloy. International Conference on Manufacturing Science and Engineering (ICMSE 2009), Zhuhai, Peoples Republic of China, 26-28 December, 2009. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/AMR.97-101.743
Nagasekhar, A.V., Caceres, C.H. and Easton, M. A. (2010). Growth restriction factor effects near the surface of high pressure die cast Mg-Al alloys. TMS 2010, Seattle, WA, USA, 14-18 February 2010. Warrendale, PA, USA: The Minerals, Metals & Materials Society (TMS).
Yang, K., Nagasekhar, A. V., Caceres, C. H. and Easton, M. (2010). The skin effect in an Mg-RE high pressure die cast alloy. 7th Pacific Rim International Conference on Advanced Materials and Processing (PRICM 7), Cairns, QLD, Australia, 2-6 August 2010. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.654-656.691
Nagasekhar, A. V., Caceres, C. H. and Easton, M. A. (2010). Cross-sectional geometry and the intermetallics structure in a high pressure die cast Mg-Al alloy. 6th International Conference on Processing and Manufacturing of Advanced Materials, Berlin, Germany, 25-29 August, 2009. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.638-642.1579
Nagasekhar, A. V., Caceres, C. and Kong, C. (2010). On the development of a pseudo micro-truss intermetallic microstructure in a high pressure die cast AZ91 alloy. 15th International Conference on the Strength of Materials (ICSMA-15), Dresden, Germany, 16-21 August 2009. Bristol, United Kingdom: Institute of Physics Publishing. doi: 10.1088/1742-6596/240/1/012005
Nagasekhar, A. V., Caceres, C. H. and Easton, M. (2009). Effect of cross-sectional geometry and solute content on the tensile properties of high pressure die cast Mg-Al alloys. Seventeenth International Symposium on Processing and Fabrication of Advanced Material, New Delhi, India, 15-17 December 2008. New Delhi, India: I.K. International Publishing House Pvt. Ltd.
Nagasekhar, A.V., Caceres, C.H. and Kong, C. (2009). INTERMETALLICS DISTRIBUTION IN TWO AND THREE DIMENSIONS IN HIGH PRESSURE DIE CAST AZ91 ALLOY. Magnesium Technology 2009, San Francisco, CA, U.S.A., 15-19 February 2009. United States: Minerals, Metals & Materials Society.
Taylor, J.A., Caceres, C.H. and Crepel, L. (2008). The Effect of Si and Cu Content on Fe-Containing Intermetallic Particles in Al-Si-Cu-0.8Fe Alloys. 11th International Conference on Aluminium Alloys (ICAA11), Aachen, Germany, 22-26 September 2008. Germany: Wiley - V C H Verlag GmbH.
Caceres, C.H. and Blake, A.H. (2008). Solute and temperature effects on the strain hardening behaviour of Mg-Zn solid solutions. 5th International Conference on Materials Structure and Micromechanics of Fracture, Brno, Czech Republic, 27-29 June 2008. Aedermannsdorf, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.567-568.45
Blake, A. H. and Caceres, C. H. (2008). Solid-solution hardening and softening in Mg-Zn alloys. 14th International Conference on the Strength of Materials, Xian, China, 4-9 June 2009. Switzerland: Elsevier. doi: 10.1016/j.msea.2006.10.205
Nagasekhar, A. V., Caceres, C. H. and Easton, M. (2008). Microstructure development and mechanical behaviour in high pressure die cast magnesium-aluminium binary alloys. TMS Annual Meetings: Magnesium Technology Symposium 2008, New Orleans, LA, United States, 9-13 March 2008. Warrendale, PA., United States: TMS.
Mann, G. E., Cáceres, C. H. and Griffiths, J. R. (2007). The determination of Hall-Petch constants in pure Mg. TMS 2007 Annual Meeting and Exhibition, , , February 25, 2007-March 1, 2007.
Mann, G.E., Caceres, C.H. and Griffiths, J.R. (2007). The Determination of Hall-Petch Constants in Pure Mg. TMS Annual Meeting and Exhibition, Orlando, Florida, USA, 25 February to 1 March, 2007. United Stated: The Minerals, Metals and Materials Society.
Nagasekhar, A. V. and Cáceres, C. H. (2007). Solute content and the tensile behavior of high pressure die cast Mg-Al alloys. The 6th Pacific Rim International Conference on Advanced Materials and Processing, Jeju Island, Korea, 5-9 November 2007. Aedermannsdorf, Switzerland: Trans Tech Publications.
Caceres, C.H., Johannesson, B., Taylor, J.A., Canales-Nunez, A., Cardoso, M. and Talamantes, J. (2007). The effect of Si content on the size and morphology of Fe-rich and Cu-rich intermetallics in Al-Si-Cu-Mg Alloys. 2007 TMS Annual Meeting and Exhibition, Orlando, Florida, USA, 25 February to 1 March, 2007. Warrendale, PN, United States: TMS (The Minerals, Metals and Materials Society).
Zhu, H., Caceres, C.H., Zhang, X., Couper, M. and Dahle, A.K. (2007). Investigation of Streaking Defects on Aluminium Extrusions. PRICM 6, Jeju Island, Korea, 5-9 November 2007. Switzerland: Materials Science Forum. doi: 10.4028/www.scientific.net/MSF.561-565.341
Caceres, C. H. and Blake, A. H. (2007). On the strain hardening behaviour of magnesium at room temperature. International Symposium on Physics of Materials (ISPMA), Prague, Czech Republic, 30 August-02 September 2005. Lausanne, Switzerland: Elsevier. doi: 10.1016/j.msea.2005.12.113
Caceres, C. H. (2006). Light alloy castings for automotive applications: The case of Al vs Mg. 10th International Conference on Aluminium Alloys, Vancouver, Canada, 9-13 July 2006. Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.519-521.1801
Viano, David, Stjohn, David, Grandfield, John and Cáceres, Carlos (2005). Hot tearing in aluminium - Copper alloys. 134th TMS Annual Meeting, , , February 13, 2005-February 17, 2005.
Blake, A. and Caceres, C. H. (2005). Solid solution effects on the tensile behaviour of concentrated Mg-Zn alloy. TMS Annual Meeting and Exhibition, San Francisco, California USA, 13-17 February, 2005. WARRENDALE: MINERALS, METALS & MATERIALS SOC.
Caceres, CH and Taylor, JA (2005). Enhanced ductility in Al-Si-Cu-Mg casting alloys with high Si content. Symposium on Shape Casting of Metals in honor of John Campbell held at the 2005 TMS Annual Meeting, San Francisco Ca, Feb 13-17, 2005. WARRENDALE: MINERALS, METALS & MATERIALS SOC.
Sigworth, G. K. and Caceres, C. H. (2004). Quality Issues in Aluminum Net-Shape Castings. AFS Transactions: 108th Metalcasting Congress, Rosemont, Illinois, 12-15 June 2004. Schaumburg, Ill, U.S.A.: American Foundry Society.
Mann, G., Griffiths, J. R. and Caceres, C. H. (2004). Hall-Petch parameters in tension and compression in cast Mg-2Zn alloys. 9th International Symposium on Physics of Materials (ISPMA 9), Prague, Czech Republic, 1 - 4 September 2003. Switzerland: Elsevier. doi: 10.1016/j.jallcom.2003.12.052
Corby, C., Caceres, C. H. and Lukac, P. (2004). Serrated flow in magnesium alloy AZ91. 13th International Conference on Strength of Materials (ICSMA 13), Budapest, Hungary, 25-30 August 2003. Lausanne, Switzerland: Elsevier. doi: 10.1016/j.msea.2004.01.077
Viano, D. M., St John, D. H., Caceres, C. H. and Grandfield, J. F. (2003). Hot tearing of aluminium - copper alloys. Light Metals Technology Conference 2003, Brisbane, Qld, Australia, 18-20 September, 2003. Brisbane, Qld, Australia: CRC for Cast Metals Manufacturing (CAST).
Blake, A. H., Caceres, C. H. and Dahle, A. K. (2003). A novel technique for growth of single crystals from wide solidication range alloys. Light Metals Technology Conference 2003, Brisbane, Australia, 18-20 September 2003. Brisbane: CRC for Cast Metals Manufacturing (CAST).
Sumitomo, T., Cáceres, C. H. and Veidt, M. (2003). Modelling of pseudoelastic behaviour in fine grain magnesium. 1st International Light Metals Technology Conference 2003, Brisbane, Australia, 18-20 September 2003. Australia: The Cooperative Research Centre (CRC) for CAST Metals Manufacturing.
Andersson, P., Caceres, C. H. and Koike, J. (2003). Hall-Petch parameters for tension and compression in cast Mg. Zurich-Uetikon, Switzerland: Trans Tech Publications Ltd.
Easton, Mark A., Abbott, Trevor and Caceres, Carlos H. (2003). The effect of microstructural features and defects on the ductility of high pressure die cast AS21, AM60 and AZ91. 2nd Osaka Internatinal Conference on Pl3, Japan, 26-30 January 2003. Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.419-422.147
Cáceres, C. H., Svensson, I. L. and Taylor, J. A. (2002). Microstructural factors and the mechanical performance of Al-Si-Mg and Al-Si-Cu-Mg casting alloys. Conference Proceedings from Materials Solutions 2002, , , October 7, 2002-October 9, 2002.
Caceres, C. H., Svensson, I. L. and Taylor, J. A. (2002). Microstructural factors and the mechanical performance of Al-Si-Mg and Al-Si-Cu-Mg casting alloys. Materials Solutions 2002 - 2nd International Aluminium Casting Technology Symposium, Columbus, OH, USA, 7-10 October 2002. Materials Park, OH, USA: ASM-International.
Bancroft, C., Caceres, C. H. and Griffiths, J. R. (2000). On the relation between hardness and yield strength in a sand cast AZ91 alloy. Magnesium Technology 2000, Nashville, TE, 12-16 March, 2000. Warrendale, PA: The Minerals, Metals & Materials Society (TMS).
Caceres, C. H. (2000). Quality index charts for Mg-based casting alloys. Magnesium Alloys and their Applications, Munich, Germany, 26-28 September, 2000. Weinheim, Germany: Wiley-VCH.
Caceres, CH (2000). Microstructural effects on the strength-ductility relationship of Al-7Si-Mg casting alloys. 7th International Conference on Aluminium Alloys (ICAA7), Charlottesville Virginia, Apr 09-14, 2000. ZURICH-UETIKON: TRANS TECH PUBLICATIONS LTD. doi: 10.4028/www.scientific.net/MSF.331-337.223
Cáceres, C. H. (1999). Microstructure Design and Heat Treatment Selection for Casting Alloys Using the Quality Index.
Wang, QG and Caceres, CH (1997). On the strain hardening behaviour of Al-Si-Mg casting alloys. 11th International Conference on the Strength of Materials (ICSMA-11), Prague Czech Republic, Aug 25-29, 1997. LAUSANNE: ELSEVIER SCIENCE SA LAUSANNE. doi: 10.1016/S0921-5093(97)00207-4
Dargusch, M., Hisa, M., Caceres, C. H. and Dunlop, G. L. (1997). Elevated temperature deformation of die cast Mg alloy AZ91D. 3rd International Magnesium Conference, Manchester, United Kingdom, 10-12 April 1996. London, United Kingdom: Institute of Materials.
Wilkinson, D. S., Caceres, C. H. and Wu, Xin (1986). STRAIN-ENHANCED GRAIN GROWTH DURING SUPERPLASTIC DEFORMATION. Pergamon Press (International Series on the Strength and Fracture of Materials and Structures).
Caceres, C. H. and Wilkinson, D. S. (1982). DAMAGE ACCUMULATION DURING SUPERPLASTIC FLOW: THE ROLE OF INCLUSIONS. Superplastic Forming of Structural Alloys., , , Metall Soc of AIME.